Search the Community

I'm moving to Israel soon and I was wondering if anyone knows whether Hak5 sells a version of the Pineapple Enterprise that supports a 220V power input. The specifications on the one I have here in the US say that it only supports a 110V input, so other than buying an Israeli step-down transformer and shipping it to clients alongside the pineapple [which will be a big hassle] I don't see any other solution, unless of course Hak5 sells 220V versions. Does anyone have any idea if they do? Or any suggestions for me in case they don't? Thanks.

Hello, I am using a pineapple MKVII without an internet connection. So I don't have the right date. I would like to use the date from my USB GPS (GPSD) to retrieve the time. I know that you have to use ntp, it is installed, but I don't know what to add or how to do because for me the only possible modifications are in /etc/config/system. Can you help me ?

i have a Wi-Fi pineapple Nano software version 2.7.0 but modules will not install please help

Hello, i got a wifi pineapple mark 7 not so long ago and installed bettercap to see the network traffic of my targets but i don't know on which interface the open ap is broadcasted which is required to set up bettercap. Thanks in advance ! Juloup

Hello, I have encountered an issue while attempting to use an MK7 device powered by a battery (in this case, through a power bank). The battery connection occupies one of the USB-C slots, and I'm trying to connect a TP-Link USB Ethernet adapter (UE200) to the USB-A port. When I run the `lsusb` command, it shows that the device is connected and detected. However, I'm unable to see any interface when I use the `ip link show` or `ifconfig` command. I have installed the necessary drivers from packages, but it didn't seem to resolve the issue. I was wondering if anyone has encountered similar problems while running somewhat similar scenarios? Any information or suggestions would be greatly appreciated.

Hi I made a module for HackRF on the WiFi Pineapple. I hope you guys like it.

Hello! This firmware marks a massive release for the WiFi Pineapple Mark VII, with a huge set of feature additions, bug fixes and improvements to many aspects of the project and it's user experience. From reliability fixes in PineAP and Recon to the addition of the Package browser and a WPA/2 Evil AP or out of the box support for supported 802.11ac adapters, there is sure to be something in this version for you. As always, you can grab the update OTA by giving your WiFi Pineapple an internet connection and navigating to Settings -> Software Update in the Web UI. A huge thank you to the beta testers for this release who provided great feedback and bug reports, you are invaluable and much appreciated! To further join the discussion, feel free to join the Discord chat. You can catch the full changelog below, and highlights of the new firmware in the second reply to this topic. Changelog 1.1.1: General Update the Pineapple Python library. Setup Fix a UX issue where the Filter description doesn't show until a mode is selected. Recon Fix an issue where some partial handshake captures would not have enough data to be crackable. Settings Remove the Nightly Update channel. Changelog 1.1.0: General Add a setup walkthrough dialog when attaching an AC-capable USB radio to the WiFi Pineapple. Improve the displaying of dates from the future in some UI pages. Move warnings into an "Informational Messages" dialog. This new dialog adds more information about system messages, and provides convenient links directly to the relevant setting. Removed bluelog and other bluetooth related tools from firmware. Note: You can now install these packages and more with ease using the Package Manager. Swap PineAP and Recon location in sidebar. Enable SSH earlier in Setup process. Removed polling for Reset button. Add password reset functionality. Notifications Notifications are now previewed in the title bar. Notifications can now be reported as "success", with a green color. Changed to a better download icon. Decrease clutter in title bar for mobile displays. Fix an issue where some kernel modules would cause the device to reboot. Setup Add Sweden to WiFi Country Code list. Fix typo in Client Filters page. Added GIFs to indicate how to proceed with verification. Added the ability to fine-tune filters during setup. Generally improved layout of various setup elements. Dashboard Improved connection error message for "Get News". Campaigns Fix an issue where some reports will use the first Recon scan, instead of the latest. Fix an issue where reports would not be removable. PineAP Fix a crash. Fix an issue where extended Recon scans would lead to a memory leak. Add Sweden to WiFi Country Code list. Fix a hang introduced in the beta which would cause Recon and Filters to show an incorrect status. Change "WPA & Open" tab to "Access Points". Change "Authenticated AP" card title to "Evil WPA AP". Add "View Handshakes" button to Evil WPA AP card. Evil WPA AP handshakes now only send one notification per client. Fix an issue where empty SSIDs would be added to the SSID Pool. Add a new tab for Management and Open APs. Fix an issue where the "Handshakes Captured" counter wouldn't be accurate. Add Evil Twin WPA Access Point. Recon Add a dialog to clarify what a handshake capture does, when clicking "Start Handshake Capture". Fix an issue where handshakes in custom locations couldn't be downloaded. Scan settings are now loaded from the current scan across devices. Added the ability to specify save location for Recon scans. Added the ability to specify save location for Handshakes. Fix an issue introduced in Beta 1 where handshakes could not be deleted. Fixed an issue where the table would become unsorted during a scan. Added graphs for wireless landscape and channel distribution. Moved Settings into a new card, with search functionality. Added the ability to select which radio is used for Recon scanning. Supported devices are listed at docs.hak5.org Add dual-band scanning support for supported adapters. Add the ability to download handshakes in hashcat format. Improved the user experience for cloning access points. Cloning options can now be fine tuned from inside Recon. Add the ability to clone WPA/2 access points. Fixed an issue where BSSIDs would not be highlightable in some browsers. Fixed an issue where a handshake capture button might show for open APs. Massively improved scanning performance by rewriting result de-duplication logic. Massively improved WPA/2 Handshake capture performance. Changed how partial and full handshakes are written to disk. Fixed a rare crash when scanning in client-heavy landscapes. Handshake MAC addresses are now censored when censorship mode is enabled. Handshake MAC addresses now use colon seperators. Logging Improve default colours for log entries in dark theme. Improve column width for the System Log. Improve parsing of System Log. Added the ability to specify PineAP log save location. Added pagination and search functionality to the PineAP Log. Create a new system module for logging. Add ability to download and search the device system log. Modules Add hot-link support for Available Modules, Package Manager, and Develop tabs. Move search box into table footer. Add a new tab for package management. Add the ability to search and download a wide variety of packages. Improve user experience when the device is offline. Settings General Improve user experience when the device is offline. Added a scrollbar for longer changelogs such as this one. Networking Add a placeholder for when the Pineapple hasn't receieved a Client Mode IP address yet. Add signal strength to discovered Client Mode networks. Rewrote Client Mode handling to improve reliability of connection. Improved reliability of automatic route setting when handling USB Ethernet, ICS, or Client Mode connections. Disconnect button is now disabled after being clicked once. Thanks, foxtrot

Hello there! I recently purchased my WiFi Pineapple after purchasing the Bash Bunny and the Rubber Ducky because the tools were excellent and well maintained. I thought it would be this great seamless experience with the pineapple as the other Hak5 devices but I was wrong. To begin with, the device and it's software is filled with bugs and the latest release was about 7 months ago! Of course the bugs may not break the device completely but it adds to a bad user experience where you realize you can't use a sdcard to install modules because of a kernel bug. Numerous bugs I have encountered are random shutdowns, recon stuck at 100%, pineap not starting or stopping and this is also present in many modules. This makes the device in a way useless because when you want to try to use because the bugs are always ruining the attack. Most of the bugs I have encountered are on the bugs tracker list and an ETA from Hak5 when the next firmware release would be highly appreciated! The problems may be hardware based but because the are already on the bug tracker list, I doubt it.

Hello! We're happy to announce the release of 1.0.1 for the WiFi Pineapple Mark VII. Based on your invaluable feedback (especially the Beta channel testers, thank you!) - numerous improvements to PineAP, Recon, Settings and more have been made. Be sure to check out the changes below and grab the new release by giving your WiFi Pineapple Mark VII an internet connection and going to "Settings > Check for Updates". Changelog: Setup Improve screen real-estate on smaller mobile screens. Button delay now says 4 seconds, to match the recovery wizard. PineAP Dramatically reduce the CPU percentage used by PineAP during idle and during scans. Logging options can now be persistently stored in the browser. Tweak the appearance of the logging options side bar. A spinner now shows when PineAP is saving the users configuration. Fixed an issue where the PineAP Source MAC option was not saving. Fixed an issue where the PineAP Autostart functionality would not work correctly. Fixed an issue where the PineAP Autostart toggle would not report a correct status. Fixed a rare issue where PineAP would not start after being disabled. Improved the settings save time. Recon Recon Table Columns can now be toggled to show or hide. Added an OUI column to the Recon Table. Scan duration choice is now remembered when you navigate away from Recon. Fixed an issue introduced in Beta 2, where Recon would sometimes show an error if PineAP was not running. Result cards are now clickable, instead of using a button to open the bigger view. Result cards for Clients now render the timestamp in human-readable format. Modules Fixed an issue introduced in Beta 3 where modules would not start due to a missing SSL dependency. Modules can now use PNG icons as well as SVGs. Settings Add censorship mode. Keyboard shortcuts can now be enabled or disabled from the Advanced Settings tab. Software Update will now accurately display when the selected update channel is closed. Small text changes to Software Update. Fixed an issue where Client Mode may not report an error correctly. Improve reliability of Client Mode. Client Mode settings are now saved automatically, and will re-connect on boot automatically. Add an option to reinstall the current firmware if no update is found. Greatly improve Network page for smaller mobile screens. Greatly improve Settings page for smaller mobile screens. Cloud C2 Improved the reliability of Recon scans. Misc Fix an issue where the Web Terminal would not connect when connected to the WiFi Pineapple via WAN. Updated the Python library for WiFi Pineapple Mark 7 modules. Fixed a rare issue where the internet connectivity check would fail despite having internet. Add support for USB Ethernet adapters using the ASIX AX88179 chipset. Add support for USB Ethernet adapters using the Realtek RTL8152 chipset. As always, feedback is greatly appreciated, and you're encouraged to join the community to discuss!

Hi! We're pleased to announce a new release for the WiFi Pineapple NANO: 2.7.0. This update addresses some of the bugs reported by the great community here on the forums and in the Hak5 Discord, as well as updates to some community packages and updates to OpenWRT. 2.7.0 Changelog: General OpenWRT version is now 19.07.2. Kernel has been updated from 4.14.133 to 4.14.171. Fixed an issue where OpenVPN would cause a kernel panic upon establishing tunnel. Recon Fixed an issue where live scans would fail on the WiFi Pineapple TETRA. Reporting Fixed an issue where emails would not be sent. Improved the user experience by automatically saving email settings when testing emails. Improved the user experience by forcing an email to send when testing, regardless of whether the "Send Email" option was checked. Advanced Fixed an issue where swap would not be mounted automatically on the NANO's SD Card. Renamed "USB" panel to "USB & Storage". Misc Added SSLSplit package to repositories. This fixes the SSLSplit module dependencies. Updated Kismet package in repositories. Updated Kismet-RemoteCap package in repositories. You can update your WiFi Pineapple NANO Over-The-Air via the Advanced module or manually at the Hak5 Download Center. ♥ - The Hak5 Development Team

Hi! We've just pushed Beta 1 for 1.0.2 to the WiFi Pineapple BETA Channel. This update features some small bug fixes and UX improvements since 1.0.1. If you'd like to try the upcoming release, updating is easily done by following the above guide. Change Log: Recon Fixed an issue where the dBi column would not sort. Show a message if all table columns are disabled. Fixed an issue where results would not update when navigating back to a running scan. Campaigns Added the functionality to delete campaign reports. Misc Fix an issue with ICS routing introduced in 1.0.1. Cloud C2 Improvements to Cloud C2 functionality. Add the ability to manage Client Mode whilst in C2 Mode. Upcoming Changes: Improved support for WPA3 and WPA2/3 Mixed Client Mode Have a suggestion? Let us know! We're constantly looking for feedback, especially during the public beta programs. If you're interested in joining the discussion, be sure to check out the community page and say hello! Thanks, Foxtrot

Hi! We're pleased to announce a new release for the WiFi Pineapple TETRA: 2.7.0. This update addresses some of the bugs reported by the great community here on the forums and in the Hak5 Discord, as well as updates to some community packages and updates to OpenWRT. 2.7.0 Changelog: General OpenWRT version is now 19.07.2. Kernel has been updated from 4.14.133 to 4.14.171. Fixed an issue where OpenVPN would cause a kernel panic upon establishing tunnel. Recon Fixed an issue where live scans would fail on the WiFi Pineapple TETRA. Reporting Fixed an issue where emails would not be sent. Improved the user experience by automatically saving email settings when testing emails. Improved the user experience by forcing an email to send when testing, regardless of whether the "Send Email" option was checked. Advanced Fixed an issue where swap would not be mounted automatically on the NANO's SD Card. Renamed "USB" panel to "USB & Storage". Misc Added SSLSplit package to repositories. This fixes the SSLSplit module dependencies. Updated Kismet package in repositories. Updated Kismet-RemoteCap package in repositories. You can update your WiFi Pineapple TETRA Over-The-Air via the Advanced module or manually at the Hak5 Download Center. ♥ - The Hak5 Development Team

Please post general comments here so we can have one place to answer the common questions.

Hi, Would anyone at HAK5 consider working with a UK retailer?

I'm looking for second hand wifi pineapple mark v, Needs to be affordable and not too pricey also be nice if ships from canada unless you offer free shipping. Just looking for the pineapple itself with default antennas and power adapter nothing else.

Hi i am trying to run modules in the pineapple nano but when i click start the modules in couple of secounds it is getting stop, i try to install internal storage and sd card as well but getting same error

Hi, I want to use the Pineapple in an defensive mode, and as well it works like a regular router, for example: - To detect another Pineapple working in Rogue AP mode. - Can open ports. - MAC filter. - VPN. - ... Do you pls know whats firmware like OpenWRT or another like this I could use? Thank you,

Hi guys, Anyone know how I can get shell access in using any modern browsers (Chrome, IE, Firefox, etc. so that the browser doesn't bitch at me and say I need to upgrade to latest browser version) by browsing to a URL? I tried putting a malicious iframe on my evil portal and using these exploits: auxiliary/server/browser_autopwn, auxiliary/server/browser_autopwn2. I even tried downgrading to IE 8 then using the exploit: exploit/windows/browser/ms10_002_aurora. But so far I got nothing. :( No meterpreter sessions. This is for a presentation, by the way. Any of you guys suggest a different way? I am desperate. Wait not really. Just really frustrated. Hope someone can help. Thanks in advance!

Hi, I have a project which needs internet-access and the only avaible connection with enough bandwidth is a open hotspot that is within range. The problem is: it disconnects after 200MB/day for each MAC-adress and you have to press a button on their captive-portal before you can connect to anything else. Did anyone got a solution for this already? Some Auto-MAC-changer + autoclicker/-postscript? Connections would come over either Ethernet or Wifi. Additional Wifi-adapters are avaible, too if needed.

Does anyone know if there is anything simple inside that I could use to tell if WiFi is on or off? I'm looking at situation where I absolutely, positively cannot do any emissions. Was thinking perhaps hooking a small LED indicator. The display LEDs seem to have a mind of their own..

HI all. My first post here. I bought a Wifi Pineapple Nano (tactical edition) yesterday. I have not received it yet, but I've got a question about wifi. Since I did not buy the "Elite" edition, since it has been withdrawn from the site, there is no Ralink wifi usb module with the device. This means you have to tether the Pineapple to my phone via Usb or Wifi. But wouldnt it be perfectly possible for the pineapple to connect to a mobile broadband hotspot instead of using my cellular data on my phone? Its a TP-link Mifi device and since I have a simcard with a dataplan of 100Gb pr. month, it would be a perfect match. But is it possible? Thanks in advance - CC

Hello everyone, I am a little bit new to the WiFi Pineapple Tetra device and specially to the Hak5 Community :D but I am pretty interested in it and I want to get one. However I have some problems. First of all I live in Lebanon hakshop doesn't ship this to my country, second of all hakshop only supports PayPal which also isn't supported in Lebanon. So in this case I started thinking of borderlinx (www.borderlinx.com) and this company provides the user a US address that I can ship the products to and later on ship to Lebanon and they also have a concierge service that can buy the product using PayPal. This sounds like good and bad because well first of all this would definitely increase the overall price that I am going to pay, first to pay the shipment price for borderlinx to US address then the shipment price to Lebanon along with the custom fees and taxes and also pay the concierge fee (5% of the product price), well I don't care I'll pay whatever amount but I also checked on the hakshop website on the terms/policies page that they prohibit freight forwarding services? Does that mean that I can't user borderlinx? And in that case how in the world would I get my hands on this amazing product? On the other hand, I wanna ask about the compatible and supported mobile hotspots. My Telco provider has the "Huawei 4G E5786Bs" Mobile Hotspot, but does it support USB Tethering? Is it compatible with Pineapple Tetra which essentially is based on OpenWRT which is Linux? Also I really didn't find much documentation and videos online. Any help would be much appreciated.

Hello together, i found a way to mount at the newest Firmware a USB-Stick from the Wifi-pineapple Nano I have a SanDisk USB-Stick with 32GB of Memory at the first time i plug the stick in it dosent work but if i do in the coomand line via SSH type his "fdisk -l" i saw the usb stick but i wasnt able to mount it so i was loocking for "dsmesg" an saw at the end was written " 2366.110000] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA " i dont really know what that means but i was then loocking in google for "opkg usb driver" and then i found this https://wiki.openwrt.org/doc/howto/usb.essentials so i was just do all stuff just updating it with ignoring errors and after that i was chaneging the fstab file to: config 'global' option anon_swap '0' option anon_mount '0' option auto_swap '1' option auto_mount '1' option delay_root '5' option check_fs '0' config 'mount' option target '/sd' option device '/dev/sdb/' option fstype 'auto' option options 'rw,sync' option enabled '1' and you have to format to ext4 your stick via ssh or on your Webinterface. after that you just need to refresh the page and i saw then a drive "/dev/sdb" and there it is !!! MY USB Stick ! i hope i was helping there some guys. And a really sorry for my bad english :( Greets from Germany Nico!

hello everyone, i just got my wifi pineapple a few weeks ago. i have been trying to troubleshoot it myself but i just cant seem to figure out what is going on with my nano. i set it up correctly and followed the directions like i was supposed to. then when i go to run the guided setup everything goes smooth until it tells me to connect my pineapple to my computer. i connect it but it doesnt seem to recognize it. now i connected it to my laptop and can go to the website with it and its fine but in order for me to connect it to the internet my computer for some reason will not recognize it . if anyone can help me that would be very much appreciated. thank you!

I have a question about using the sidejacking tools built into kali linux like hamster and ferret in conjunction with the wifi pineapple. This came about because i was using the pineapple module "Dwall" and seeing the cookies pass by. So if i fire up ferret and hamster on my kali machine to pick up the cookies that dwall picks up what is the best interface to use to achieve this? Do i use eth1 with i am using to connect my pineapple to my computer or maybe wlan0 which is my interface connected to the internet? I also have an eth0 interface because i have also have another ethernet cable from pineapple to computer (not really needed just didn't want to lose the cable lol) As you can see i have a few interfaces and i was wondering which one i should use. Hope someone can clear this up for me, thanks