Search the Community
Showing results for tags 'mk7'.
Hello all! This monumental 1.1.0 Beta release gives you some amazing new features for your WiFi Pineapple that would not have been possible had it not been for the great feedback and feature requests from our community. Thank you. We hope you enjoy these new features and as always invite you to join us on Discord and the forums. Changes since Beta 1 begin with NEW. General NEW: Removed bluelog and other bluetooth related tools from firmware. Note: You can now install these packages and more with ease using the Package Manager. NEW: Swap PineAP and Recon location in sidebar. NEW: Enable SSH earlier in Setup process. NEW: Removed polling for Reset button. Add password reset functionality. Notifications Notifications are now previewed in the title bar. Notifications can now be reported as "success", with a green color. Changed to a better download icon. Decrease clutter in title bar for mobile displays. Fix an issue where some kernel modules would cause the device to reboot. Setup NEW: Added GIFs to indicate how to proceed with verification. NEW: Added the ability to fine-tune filters during setup. NEW: Generally improved layout of various setup elements. Dashboard NEW: Improved connection error message for "Get News". Campaigns Fix an issue where some reports will use the first Recon scan, instead of the latest. NEW: Fix an issue where reports would not be removable. PineAP NEW: Change "WPA & Open" tab to "Access Points". NEW: Change "Authenticated AP" card title to "Evil WPA AP". NEW: Add "View Handshakes" button to Evil WPA AP card. NEW: Evil WPA AP handshakes now only send one notification per client. Fix an issue where empty SSIDs would be added to the SSID Pool. Add a new tab for Management and Open APs. Fix an issue where the "Handshakes Captured" counter wouldn't be accurate. Add Evil Twin WPA Access Point. Recon NEW: Added the ability to specify save location for Recon scans. NEW: Added the ability to specify save location for Handshakes. NEW: Fix an issue introduced in Beta 1 where handshakes could not be deleted. NEW: Fixed an issue where the table would become unsorted during a scan. NEW: Added graphs for wireless landscape and channel distribution. NEW: Moved Settings into a new card, with search functionality. Added the ability to select which radio is used for Recon scanning. Supported devices are listed at docs.hak5.org Add dual-band scanning support for supported adapters. Add the ability to download handshakes in hashcat format. Improved the user experience for cloning access points. Cloning options can now be fine tuned from inside Recon. Add the ability to clone WPA/2 access points. Fixed an issue where BSSIDs would not be highlightable in some browsers. Fixed an issue where a handshake capture button might show for open APs. Massively improved scanning performance by rewriting result de-duplication logic. Massively improved WPA/2 Handshake capture performance. Changed how partial and full handshakes are written to disk. Fixed a rare crash when scanning in client-heavy landscapes. Handshake MAC addresses are now censored when censorship mode is enabled. Handshake MAC addresses now use colon seperators. Logging NEW: Added the ability to specify PineAP log save location. NEW: Added pagination and search functionality to the PineAP Log. Create a new system module for logging. Add ability to download and search the device system log. Modules NEW: Move search box into table footer. Add a new tab for package management. Add the ability to search and download a wide variety of packages. Improve user experience when the device is offline. Settings General Improve user experience when the device is offline. NEW: Added a scrollbar for longer change logs such as this one. Networking NEW: Rewrote Client Mode handling to improve reliability of connection. NEW: Improved reliability of automatic route setting when handling USB Ethernet, ICS, or Client Mode connections. NEW: Disconnect button is now disabled after being clicked once. You can catch the beta release OTA, by following the instructions outlined in the Hak5 Docs article for Beta/Nightly updates. Thanks again for the continued feedback. - Foxtrot
Hello! We're happy to announce the release of 1.0.1 for the WiFi Pineapple Mark VII. Based on your invaluable feedback (especially the Beta channel testers, thank you!) - numerous improvements to PineAP, Recon, Settings and more have been made. Be sure to check out the changes below and grab the new release by giving your WiFi Pineapple Mark VII an internet connection and going to "Settings > Check for Updates". Changelog: Setup Improve screen real-estate on smaller mobile screens. Button delay now says 4 seconds, to match the recovery wizard. PineAP Dramatically reduce the CPU percentage used by PineAP during idle and during scans. Logging options can now be persistently stored in the browser. Tweak the appearance of the logging options side bar. A spinner now shows when PineAP is saving the users configuration. Fixed an issue where the PineAP Source MAC option was not saving. Fixed an issue where the PineAP Autostart functionality would not work correctly. Fixed an issue where the PineAP Autostart toggle would not report a correct status. Fixed a rare issue where PineAP would not start after being disabled. Improved the settings save time. Recon Recon Table Columns can now be toggled to show or hide. Added an OUI column to the Recon Table. Scan duration choice is now remembered when you navigate away from Recon. Fixed an issue introduced in Beta 2, where Recon would sometimes show an error if PineAP was not running. Result cards are now clickable, instead of using a button to open the bigger view. Result cards for Clients now render the timestamp in human-readable format. Modules Fixed an issue introduced in Beta 3 where modules would not start due to a missing SSL dependency. Modules can now use PNG icons as well as SVGs. Settings Add censorship mode. Keyboard shortcuts can now be enabled or disabled from the Advanced Settings tab. Software Update will now accurately display when the selected update channel is closed. Small text changes to Software Update. Fixed an issue where Client Mode may not report an error correctly. Improve reliability of Client Mode. Client Mode settings are now saved automatically, and will re-connect on boot automatically. Add an option to reinstall the current firmware if no update is found. Greatly improve Network page for smaller mobile screens. Greatly improve Settings page for smaller mobile screens. Cloud C2 Improved the reliability of Recon scans. Misc Fix an issue where the Web Terminal would not connect when connected to the WiFi Pineapple via WAN. Updated the Python library for WiFi Pineapple Mark 7 modules. Fixed a rare issue where the internet connectivity check would fail despite having internet. Add support for USB Ethernet adapters using the ASIX AX88179 chipset. Add support for USB Ethernet adapters using the Realtek RTL8152 chipset. As always, feedback is greatly appreciated, and you're encouraged to join the community to discuss!
Hi! We've just pushed Beta 1 for 1.0.2 to the WiFi Pineapple BETA Channel. This update features some small bug fixes and UX improvements since 1.0.1. If you'd like to try the upcoming release, updating is easily done by following the above guide. Change Log: Recon Fixed an issue where the dBi column would not sort. Show a message if all table columns are disabled. Fixed an issue where results would not update when navigating back to a running scan. Campaigns Added the functionality to delete campaign reports. Misc Fix an issue with ICS routing introduced in 1.0.1. Cloud C2 Improvements to Cloud C2 functionality. Add the ability to manage Client Mode whilst in C2 Mode. Upcoming Changes: Improved support for WPA3 and WPA2/3 Mixed Client Mode Have a suggestion? Let us know! We're constantly looking for feedback, especially during the public beta programs. If you're interested in joining the discussion, be sure to check out the community page and say hello! Thanks, Foxtrot