Jump to content

Darren Kitchen

Root Admin
  • Posts

    4,887
  • Joined

  • Days Won

    248

Everything posted by Darren Kitchen

  1. We have all of the stuff separate but the builder is gone. The shop plugin was more trouble than it was worth. You can always hit us up if you need something special :)
  2. Nearly every modern modem I've tested since visiting this last supports cdc_ether or RNDIS. There are still some funky ones out there, but it's becoming more rare when it comes to carrier sold modems. We're in the same boat as every other openwrt (or Linux for that matter) project. My advise, get one that supports tethering. Sure the serial based ones on the supported list work - but why do the heavy lifting of managing a complex mobile broadband connection on the pineapple side when the newer modems manage themselves. My favorite right now is the Huawei E355. It enumerates at eth1 and "just works ™"
  3. Ish... Some php-fu should be able to determine the domain queried and forward on to an adequate landing page. I haven't tried it myself but knowing nodogsplash, the data required should be there somewhere.
  4. It is flashed at the factory and a series of tests are run to verify the installation and proper function of all major components.
  5. DNS should have completed propagating by now. Flush your DNS cache if you still can't access WiFiPineapple.com
  6. What version of mint? Have you run wp5.sh? After you run wp5, what's the config of your iptables, route, ifconfig?
  7. I agree the ssid management feature could use some love. Adding is simple but removing is a pain. I usually end up dropping to a shell and using nano to edit /etc/pineapple/ssid_file I have a video on PineAP that'll be going out Monday.
  8. Sure. You can change the SSH config to listen on a different port. Have you watched the video series on SSH and setting up a relay specifically?
  9. The Pineapple Juice 1800 is coupled with a 350mA charger. The 7800 comes with a 1000mA charger. They should take about 8 hours to charge.
  10. Put the Pineapple is wired client mode then simply connect their Ethernet interfaces. Your pirate box should assign the MK5 an IP from DHCP.
  11. Can you post your /etc/config/wireless and explain what it is you're expecting?
  12. Contact shop@hak5.org if it ends up being a faulty PSU -- we'll get you sorted.
  13. Both NHA and NH are supported. See http://wiki2.wifipineapple.com/#!compatible_wifi_cards.md I prefer the NHA myself but they're both great NICs.
  14. Prior to firmware version 2.1 you would connect to the open Pineapple5_xxxx AP. Post firmware 2.1 you will be guided through the setup of a WPA2 secured management AP.
  15. I'm sure that option can be accommodated if a ticket is submitted: https://wifipineapple.com/index.php?bugs_pub
  16. http://abcnews.go.com/GMA/video/hotel-warning-holiday-travelers-27605180
  17. The latest firmware includes a lot of help when it comes to the different modules of PineAP. It's a very effective suite and I recommend you give it a shot. Click on the question marks next to each module for more information.
  18. We noticed a lot of people manage their WiFi Pineapples over WiFi rather than Ethernet. It is quote convenient, however open WiFi is usually a bad idea (irony anyone?). To facilitate secure management of your WiFi Pineapple over WiFi, we've included a WPA2 interface by default. You're welcome to turn it off from /etc/config/wireless if you wish.
  19. italogermano, We're going to make this right. As Seb has pointed out, the MK5 is totally legal. We have the Declaration of Conformity here: https://drive.google.com/file/d/0B1kHHuoTR841T0hpbHYzYk1MUlUzVExHbDBLNFdteEZYRGln/view?usp=sharing I'm making changes to our shipping process to ensure this doesn't happen again. If you would be so kind as to email shop@hak5.org as well as myself, darren@hak5.org, with the order number, we're going to expedite a replacement MK5 along with the necessary documentation to you via DHL. If all goes well you should have it by the end of the week. Regards, Darren
  20. Walk us through exactly what happened. How did you update (SSH, OTA?), what happened after flashing? Did you get to the welcome screen / initialization wizard? Do you receive an amber light with Ethernet plugged in? Have you tried the recovery DIP switch configuration?
×
×
  • Create New...