saeed662 Posted November 23, 2012 Share Posted November 23, 2012 thx for the module. its not working well. few notes: i noticed when using ssh wash never picks up the AP that have WPS enabled over ssh airodump-ng doesnt pickup the same results to the web GUI. the web gui seems to get better results. n finally it doesnt attack :( even with 50% range just channel hops Quote Link to comment Share on other sites More sharing options...
PineDominator Posted January 9, 2013 Share Posted January 9, 2013 Reader 0.4 still saying not installed? I have installed it to usb with my startup script, my script after installing all the opkgs sym links a few folders/files from the USB to the internal. This fixes issues where commands don't run if started by a script. Not sure if that is the issue? Also when I instruct your module to install to usb it still shows its not installed? Quote Link to comment Share on other sites More sharing options...
WatskeBart Posted February 16, 2013 Share Posted February 16, 2013 Reader 0.4 still saying not installed? I have installed it to usb with my startup script, my script after installing all the opkgs sym links a few folders/files from the USB to the internal. This fixes issues where commands don't run if started by a script. Not sure if that is the issue? Also when I instruct your module to install to usb it still shows its not installed? Same here Quote Link to comment Share on other sites More sharing options...
HakSmack Posted February 17, 2013 Share Posted February 17, 2013 Yepp same here Quote Link to comment Share on other sites More sharing options...
denied Posted February 20, 2013 Share Posted February 20, 2013 Yeah dono, seems very weird, i got two antenas connected to the JAHsager ;) and i get a few good green connections when i scan for APs. Right now i've tried 4 of them and still same thing like ma05k1 has: [+] Switching mon0 to channel 11[+] Waiting for beacon from 5C:D9:98:C0:**:** This is if i lock the reaver to the channel, else it just hoops between all the channels and nothing else happens. Seems a bit weird =/ Quote Link to comment Share on other sites More sharing options...
bransonb3 Posted March 1, 2013 Share Posted March 1, 2013 (edited) Can someone please provide detailed instructions on how to use reaver on the pineapple. Please provide pictures if possible. If you don't have the time to post instructions can you at least point me in the right direction. Please help because I can not figure out how to use reaver. I have the the pineapple mark IV elite bundle. ,Bransonb3 Edited March 1, 2013 by bransonb3 Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted March 1, 2013 Share Posted March 1, 2013 Are you using the Infusion/Module? Or command line via SSH? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted March 1, 2013 Share Posted March 1, 2013 Can someone please provide detailed instructions on how to use reaver on the pineapple. Please provide pictures if possible. If you don't have the time to post instructions can you at least point me in the right direction. Please help because I can not figure out how to use reaver. I have the the pineapple mark IV elite bundle. ,Bransonb3 If you are not using the module but Reaver over the command line, well, it is no different than using it on a laptop or other device. For instructions and howtos, use this or Google. Quote Link to comment Share on other sites More sharing options...
bransonb3 Posted March 5, 2013 Share Posted March 5, 2013 I'm using the module. Quote Link to comment Share on other sites More sharing options...
demonjester Posted March 14, 2013 Share Posted March 14, 2013 Yeah dono, seems very weird, i got two antenas connected to the JAHsager ;) and i get a few good green connections when i scan for APs. Right now i've tried 4 of them and still same thing like ma05k1 has: [+] Switching mon0 to channel 11 [+] Waiting for beacon from 5C:D9:98:C0:**:** This is if i lock the reaver to the channel, else it just hoops between all the channels and nothing else happens. Seems a bit weird =/ I have the same problem even when I try different wifi card. Quote Link to comment Share on other sites More sharing options...
Porch Posted March 19, 2013 Share Posted March 19, 2013 I have found that if you if you use ifconfig wlan1 down then ifconfig wlan1 up on the pineapple it will only scan on channel 11 so I use ifconfig wlan1 down airmon-ng start wlan1 mon0 will then scan on all channels Even on 2.8 and Reaver GUI 0.4 I have to do this to get it to work. Quote Link to comment Share on other sites More sharing options...
demonjester Posted March 28, 2013 Share Posted March 28, 2013 Did anyone get the reaver module to actually work? I have tried with the built in interface, and tried a external wifi card (chipset rtl8187) and still could not get it to work. Quote Link to comment Share on other sites More sharing options...
toysldr Posted March 30, 2013 Share Posted March 30, 2013 I'm getting the same channel as several of the other posters, "waiting for beacon from *********" I have reaver 0.4 installed to USB and firmware 2.8 installed. Quote Link to comment Share on other sites More sharing options...
WallE Posted March 31, 2013 Share Posted March 31, 2013 Reaver only work to get WEP handshake and can't be use on WPA right? Quote Link to comment Share on other sites More sharing options...
demonjester Posted March 31, 2013 Share Posted March 31, 2013 Reaver only work to get WEP handshake and can't be use on WPA right? That is incorrect. Reaver is a wps brute force tool. WPS is a feature that the wifi alliance brought out to put on almost every router from 2007 to present. Whether the router is WEP encrypted or WPA/WPA2 encrypted the security is crippled by this wps feature. WPS = wifi protected setup. Quote Link to comment Share on other sites More sharing options...
WallE Posted March 31, 2013 Share Posted March 31, 2013 How can I know if an AP have WPS ? Quote Link to comment Share on other sites More sharing options...
demonjester Posted March 31, 2013 Share Posted March 31, 2013 (edited) Ok, everyone, it works just fine if you ssh into the pineapple and do it that way. There must be some problem with the ui causing it not to run, I mean it may running but its just outputting the -vv (verbose) correctly. Also if you connect to the pineapple via wifi and try this, chances are you may get kicked off from the wifi, I am ssh into via ethernet and its running 4 seconds per key atm. here is the procedure I went through. ssh root@"whatever ip you have without the quotes" ifconfig and see if wlan0 is there (just to make sure) airmon-ng start wlan0 read below if nothing pops up wash -i mon0 (now at this step, I noticed in the ui of the pineapple it did a regular scan not wps only routers, hackrylix if your not using wash to do the ap scan this may help with that.) if you are scanning with the command above and nothing is showing up exit out of the scan (CTRL + C) and type this, it will turn ifconfig wlan0 down (hackrylix this should fix wash scan) now run wash -i mon0, and you should see the wps routers once you find your target you will just ctrl + c and do reaver attack reaver -i mon0 -b "mac address of the router" -c "router channel number" -vv (so you can watch the key cracking procedure) thats about it. Edited March 31, 2013 by demonjester Quote Link to comment Share on other sites More sharing options...
satana77 Posted April 2, 2013 Share Posted April 2, 2013 Is there any cure for "Waiting for beacon..." trouble for MK4 2.8? It's very sad without reaver. Tried to do all above. Quote Link to comment Share on other sites More sharing options...
demonjester Posted April 3, 2013 Share Posted April 3, 2013 Is there any cure for "Waiting for beacon..." trouble for MK4 2.8? It's very sad without reaver. Tried to do all above. Try --win7 in your reaver command Quote Link to comment Share on other sites More sharing options...
satana77 Posted April 4, 2013 Share Posted April 4, 2013 Try --win7 in your reaver command Doesn't help. I could only determine what i need to do to make wash working good: ifconfig wlan0 down airmon-ng stop mon0 airmon-ng stop wlan0 iwconfig wlan0 mode Monitor ifconfig wlan0 up airmon-ng start wlan0 wash -i mon0 -C.... Quote Link to comment Share on other sites More sharing options...
demonjester Posted April 5, 2013 Share Posted April 5, 2013 Hmm its weird, I reflashed pineapple 2.8.0 and i set the auto refresh to 5 seconds and it was working perfectly. Quote Link to comment Share on other sites More sharing options...
satana77 Posted April 5, 2013 Share Posted April 5, 2013 Hmm its weird, I reflashed pineapple 2.8.0 and i set the auto refresh to 5 seconds and it was working perfectly. Reaver installed on USB? Quote Link to comment Share on other sites More sharing options...
demonjester Posted April 5, 2013 Share Posted April 5, 2013 (edited) Reaver installed on USB? Im sure I check marked install to usb. I will be home in 2 hours I will confirm when I get home. edit; crazy day, and it is installed to usb, idk what it was that fixed it (I still ssh in and do it that way for my shell script) Edited April 6, 2013 by demonjester Quote Link to comment Share on other sites More sharing options...
satana77 Posted April 6, 2013 Share Posted April 6, 2013 so you had the same problem and it solved by itself? Quote Link to comment Share on other sites More sharing options...
demonjester Posted April 6, 2013 Share Posted April 6, 2013 so you had the same problem and it solved by itself? I guess? I mean I usually did the 2 second refresh rate (maybe somehow overhwlmed it and froze the output.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.