Jump to content
Hak5 Forums

Sebkinne

Root Admin
  • Content Count

    3,971
  • Joined

  • Last visited

  • Days Won

    318

Everything posted by Sebkinne

  1. Hi everyone, We just released firmware version 2.4.0 for the WiFi Pineapple, adding Hak5 Cloud C2 support! Changelog: Hak5 Cloud C2 This update adds support for the Hak5 Cloud C2 PineAP Various stability fixes and improvements Download:Over the air via your WiFi Pineapple's webinterface, or at https://wifipineapple.com/downloads
  2. Sebkinne

    Are Raspberry Pi's supported

    Tomorrow.
  3. Sebkinne

    Product Support / Warranty

    Hi CuChulaind, Please reach out to support at https://docs.hak5.org/hc/en-us/requests/new Best regards, Sebkinne
  4. Sebkinne

    Hak5 Cloud C2

    Hi everyone, We just launched the Hak5 Cloud C2! I just wanted to give everyone a heads up and give some basic instructions on how to get everything set up: Setting up the Hak5 Cloud C2 Server To set up the Hak5 Cloud C2 server, simply head over to https://c2.hak5.org, download either the community or professional edition, and wait for an email to arrive with the download link and licence key. Once you have downloaded the ZIP file containing the server, choose the correct version for your OS and architecture (such as linux 64bit), and execute the binary. You will be prompted to add some parameters such as '-hostname'. We recommend setting up the Hak5 Cloud C2 with DNS. Once running, you will have a setup token printed to your terminal. Make a note of that and head over to the configured IP / DNS and port using your favorite web browser (Firefox or Chrome(ium) are recommended). You will be be guided through the setup there, and asked to enter your setup token and licence key. After performing the initial setup, if you need further help, click on the three dots in the top right corner and click on "Help". Update your device firmwares: WiFi Pineapple Update your WiFi Pineapple NANO or TETRA to version 2.4.0 or above, via the webinterface as you do normally Packet Squirrel Visit https://packetsquirrel.com/setup and follow the "Firmware Upgrades" instructions to install firmware version 2.0 or above LAN Turtle Update your LT, LT-SD, or LT-3G by using the "Check for updates" button inside of the turtle shell. Alternatively, follow the manual upgrade instructions from https://lanturtle.com/setup. You'll want to be on version 5 or above to have Cloud C2 support. Provisioning your devices: Once you have updated all of your Hak5 devices, you can go ahead and create new devices in the Hak5 Cloud C2 interface. After doing so, you'll be able to download the device.config files for each device by clicking the device from the list and then clicking the setup button from the device's menu. Once you have the config file, SCP it into the /etc/ folder on your device of choice and reboot the device. You should see it come online in the Hak5 Cloud C2 interface within a few minutes. Please remember that your devices will need to be networked to be able to reach the Hak5 Cloud C2 server (a mistake we made a lot during development). Introducing the Hak5 Cloud C2 video:
  5. Yup, that happens a lot, especially with WiFi drivers. Always research what chipset a wireless card uses and look up the driver compatibility before you buy ?
  6. You can navigate around as you please, recon scans will continue in the background and show you results when you get back to the recon module.
  7. Sebkinne

    Weird things happening

    No clue, sorry. Definitely not us ?
  8. Hi everyone, We just released firmware version 2.4.0 for the WiFi Pineapple, adding Hak5 Cloud C2 support! Changelog: Hak5 Cloud C2 This update adds support for the Hak5 Cloud C2 PineAP Various stability fixes and improvements Download:Over the air via your WiFi Pineapple's webinterface, or at https://wifipineapple.com/downloads
  9. Sebkinne

    License Validation Clarification

    Hi Oac, Currently the Cloud C2 server doesn't work properly behind a reverse proxy - we'll introduce settings which support this in the next update, which should be out within the week. Unfortunately, this doesn't seem to have anything to do with the fact the license cannot be validated. The message "error validating license key" means that there was an issue communicating with the c2.hak5.org server, or that the response was incomplete or corrupted. I'm going to see if I can replicate the issue. If I can we'll make sure it's fixed for the next update.
  10. Sebkinne

    License Validation Clarification

    Hi Oac, Does you docker container have network access to https://c2.hak5.org? As long as the server can reach that URL (and you have a valid license), you should be good to go.
  11. Sebkinne

    Where did you hear about hak5 products.

    I can vouce for that link -- it's to the `Hacking Exposed` book :)
  12. Sebkinne

    Hak5 Cloud C2

    We don't really support using the devices locally if they are set up to work with the C2. It can cause a bunch of possible synchronization issues, which is why we are considering disabling local access all together (when a device is registered with a C2 server). Before we do that though we want to make a few more options, such as networking, available via the C2.
  13. We'll check out what the driver difference was and see if we can get it working again!
  14. Sebkinne

    What am I missing

    `-hostname localhost` is your issue. You'll want to put your computer's IP address there, otherwise devices will try to reach the server on "localhost".
  15. Sebkinne

    High CPU Usage

    This is because the dashboard requests make the CPU spike to a high amount. The WiFi Pineapple NANO is not actually at 100% load. If you want to see more accurate statistics, please SSH into your WiFi Pineapple NANO and run the 'top' command.
  16. Sebkinne

    Support for the MARK V ?

    Seeing as we are re-shuffling a bunch of firmware code and pushing some more stuff upstream, I'll see if I can also add the WiFi Pineapple MKV to upstream OpenWrt. No promises, but that would at least allow you to build vanilla OpenWrt for it.
  17. Sebkinne

    Support for the MARK V ?

    We gave the MKV a few years before discontinuing it. We intend to keep support going for the WiFi Pineapple NANO and TETRA as long as it is feasible.
  18. Hi BeNe, Currently you are not going to be able to run the server in HTTPS mode with custom certificates / without the ACME client. An option allowing this is currently in the works. If you wanted to run the Hak5 C2 Server behind a reverse proxy (with SSL or without), we will need to add an option to override the C2 URL which the clients use, as this is currently done automatically and would break the client configuration. This is also something currently in the works. Both of these configurations will be available in the near future.
  19. Sebkinne

    Are Raspberry Pi's supported

    Yup, this is also in the works!
  20. Sebkinne

    Are Raspberry Pi's supported

    We'll be releasing ARM builds of the server in the very near future.
  21. Sebkinne

    Hak5 Cloud C2

    There are a couple of issues I can see: Listening on 127.0.0.1 / setting the hostname to 127.0.0.1 while enabling https - This will not work, as HTTPS uses let's encrypt and expects a DNS name Listening on 127.0.01 - While this should work, devices (WiFi Pineapple, LAN Turtle, Packet Squirrel) will not be able to communicate with the server. If you want to run it locally, I would suggest doing something like "sudo ./c2_community-linux-64 -hostname localhost".
  22. Sebkinne

    Just a Few Questions

    Absolutely :)
  23. Sebkinne

    Just a Few Questions

    The devices will just come back online, provided your database is not corrupted.
  24. Sebkinne

    cpu 100% dashboard

    It's not really a problem we are likely able to fix quickly. When refreshing the dashboard, we get a spike in CPU, which is then recorded and displayed. We are most likely simply going to remove the CPU usage entirely.
×