WallE

So my setting is 3 radio. A small antenna in the port 2 of the wifi pineapple (wlan0) a 2,4g yagi antenna wlan1 and an Alfa as wlan2 So instead of using the infusion for the AP created by Wlan0 I want to connect to an existing AP than use all my infusion from there. For this I tried at start to change Wlan0 to connect to the targeted AP without broadcasting any AP, and then I tried to use Wlan1 and 2 for the infusions but nothing work. What setting should I use to be able to use the infusion on a recently connected AP? Thanks

Ettercap will be discontinued with the new firmware.

What a great new. Finally an update to fix DNS spoof. I will take out the dust from my mark V just for this! Very impatient to play with this! So tell us more please when will it be out? Anyway, nice job guys!

Chrome and firefox have implented a protection against SSLstrip. It's called HSTS https://www.owasp.org/index.php/HTTP_Strict_Transport_Security It's automatically redirect certain website to https. Preventing the use of sslstrip. It might be your problem.

Is this new script bypass HSTS protection?

I tried to go there http://wifipineapple.com/mk4/infusions.php?infusion=networkmanager-1.9 But it's not working, where else can I download the infusions tar?

My internet is not working with my pineapple so I want to download network manager manually, how can I do that?

Unfortunately I tried this but it's not working

I don't have internet with tethernet so I want to manually download the network manager to connect through wifi. How can I do that?

I would like to connect my IP camera with the wifi pineapple. With my window 7 I just have to fix static IP for camera and the computer + port forwarding. But how can I do that on the wifi pineapple?

Alright so I am trying to get the handshake of a wpa-psk connection with the wifi pineapple. Unfortunatly the files are creating in the root of the pineapple, and after some time it's full. So how can I scan with airodump-ng and the file go directly to usb instead of root?

I played a lot with the jammer modules and with airecrack. Unfortunately this is far from what I was excepting. Jammer modules & Airecrack problem: 1. Only ''Deauth'' the specific target. We can still see the SSID but can't connect to it. 2. It's doesn't work for everybody. For example I was able to connect to the SSID but my assistant was deauthed 3. With airecrack I am only able to deauth one mac adress and not the entire network. So I was thinking about maybe something like DoS? Or am I using the jammer modules wrongly?

Here's what I want to do: Let's say there is a SSID named Target I would like to shutdown the SSID Target and create a fake AP called Target with the wifi pineapple. Like that the user will only see my SSID and not the real want (The real want will be shutdown/ddos) But, what tool can I use on the wifi pineapple to shutdown the Target AP?

I suggest you to use Aireplay-ng. It is more light and the jammer modules and really easy to use. Here's a good place to learn how to use airecrack/aireplay http://www.aircrack-ng.org/doku.php?id=deauthentication Good luck!

But let's say they are connected together through PoE lan. How can you access 1 or 2 they have the same link to the UI 172.16.42.1

Well I am posting my problem here because I am struggling with that since 4 day's and it's prevent me to go further in my research with the wifi pineapple. If you could tell me a step by step how you are setting your pineapple in tango mode it would be more than appreciated. Here's what I did step by step: I am going on each pineapple one at a time. On the first one: uci set network.lan.ipaddr=172.16.42.2 uci commit network reboot Than on the second pineapple that will be the gateway I type: uci set network.lan.gateway=172.16.42.1 uci commit network reboot Than pineapple 1 = 172.16.42.1 Pineapple 2 = 172.16.42.2 But I have big difficulty sharing internet. My setting = pineapple 1 + alfa + pineapple 2 So I am setting pineapple 1 wlan0 and alfa wlan1 to connect to my home wifi by client mode. That's the only way I get a DHCP request, wlan0 alone can't get a DHCP request. Then I go to ICS and I share wlan1 to br-lan and pineapple 2 AP get internet but no internet in the UI Pineapple one: POE / LAN Port: 172.16.42.1 USB 3G Modem: WAN / LAN Port: Public Internet: 111.328.24.324 Pineapple two: POE / LAN Port: 172.16.42.2 USB 3G Modem: WAN / LAN Port: 192.168.2.27 Public Internet: Error Connecting What am I doing wrong?

No I can connect without alfa. The problem is that pineapple number 2 is getting a WAN IP and do not get any internet connection from pineapple 1

So my config are alright? Should I downgrade to 2.7 to try it?

I really need support about that guys I am stuck at this step since a while and it's prevent me from continuing my project

Sure I would be glad. I personally tried over and over those tutorial and it's just not working for me. There is other thread about people struggling by the way.

They are not working anymore.

I have 2 battery pack created like your tutorial show you. I would also like to power my usb hub but I supose I can just plug it and with the 12 volt it will be enough to power the alfa + 16 gig flash drive 12volt 8 battery pack ----> Pineapple -----> Usb hub -----> Alfa + flash drive

I have 2 battery pack created like your tutorial show you. I would also like to power my usb hub but I supose I can just plug it and with the 12 volt it will be enough to power the alfa + 16 gig flash drive 12volt 8 battery pack ----> Pineapple -----> Usb hub -----> Alfa + flash drive

Would be really appreciated!

Well a little bit more about all that. Here is what I am doing step by step: I am going on each pineapple one at a time. On the first one: uci set network.lan.ipaddr=172.16.42.2 uci commit network reboot Than on the second pineapple that will be the gateway I type: uci set network.lan.gateway=172.16.42.1 uci commit network reboot Than pineapple 1 = 172.16.42.1 Pineapple 2 = 172.16.42.2 But I have big difficulty sharing internet. My setting = pineapple 1 + alfa + pineapple 2 So I am setting pineapple 1 wlan0 and alfa wlan1 to connect to my home wifi by client mode. That's the only way I get a DHCP request, wlan0 alone can't get a DHCP request. Then I go to ICS and I share wlan1 to br-lan and pineapple 2 AP get internet but no internet in the UI Pineapple one: POE / LAN Port: 172.16.42.1 USB 3G Modem: WAN / LAN Port: Public Internet: **1.**8.*4.**4 Pineapple two: POE / LAN Port: 172.16.42.2 USB 3G Modem: WAN / LAN Port: 192.168.2.27 Public Internet: Error Connecting What am I doing wrong? I