Foxtrot
-
Posts
2,171 -
Joined
-
Days Won
155
Everything posted by Foxtrot
-
You can check the MD5 on the pineapple... md5sum upgrade.bin
-
Clients not probing/connecting to Karma in MK4 with FW 2.8.1
Foxtrot replied to steps's topic in WiFi Pineapple Mark IV
The SSID you set for your pineapple is only visable when Karma is disconected, as a means of connecting to your pineapple wirelessly, while your phone may see this before and after you activate karma, that is only because yoru phone will temporarily keep it in its search list. New phones that scan will not see it. -
In an infusion or via an SSH session?
-
No. Their is no script anymore. All network related settings should be manually handled by /etc/config/network and /etc/config/wireless. Be careful and make backups.
-
By removing infusions from the UI, or previously installed packages.
-
You can configure 3G settings, or more specifically the 3g-wan2 interface, in the Networking tile, then the 3G tab.
-
Check the PCB for any burn/heat marks
-
https://wifipineapple.com/index.php?portal&bugs&action=view&id=49 Bug report has been filed :)
-
The way karma works is very well described on the homepage of the pineapple, Other than that try using the search function on this forum and crawl :) Good luck
-
Currently, persistant SSiDs are broken. You can set an SSiD, but after a reboot, it will default back to the pineapple xx:xx address, where xx:xx are the last two octets of your pineapples wifi radio mac address. As for karma, Only devices that remember an open network will connect to it.
-
That 94%, to me I have a feeling that that is the idling cpu percentage, not the cpu percentage it is using, try checking to see if the number 'status' reports is the same as the idle one.
-
Serial Flash via UART - Connected VCC to VDD
Foxtrot replied to PierogiPowered's topic in WiFi Pineapple Mark IV
The detailed wiki page, which you should of followed, Does detail to never attatch the VCC. So yeah, you fried it. However the /?flashing page should have this detail, hopefully sebkinne will chime in. -
Make sure you are supplying enough power to the hub, Also, what Alfa are you using?
-
Hmm, it shouldnt be the uhttpd problem then... If you are running lots of services, remember that the pineapple is not a computer, its still a SOHO router. From the picture your showing, The pineapple is using only 3% of the CPU.
-
He rises from the dead once again ;)
-
I'm sure this has been done by a member of the forums before, I think it might of been telot.
-
Execute 'top' from a Terminal Session and report whether uhttpd is at the top of the list.
-
Judging from the information given, I would say it is uhttpd, However, could obviously possibly be something else.
-
A fix for that is also coming, i hear.
-
I have informed Sebkinne and a temporary bug fix has been made. https://wifipineapple.com/?portal&bugs&action=view&id=48
-
It is not.
-
Thanks, I just added bg support. It works quite well, Your design influenced me a little ;)
-
Version 1.1 Released. Original Post updated.
-
System Control. Control pretty much every aspect of your System, from LEDs, SSIDs, Karma, DNSSpoof, the lot. All from the ease of one Infusion. Full Feature List : -Easy Client Viewing -Full System Information -Memory Stats -Enable/Disable WiFi, Karma -Enable/Disable All LEDs -Clear Cache Button -Reboot Pineapple Button -List Attached USBs -Show Dmesg Log -Show Karma Log -Show Interface Status' Coming Soon : -Enabled/Disable DNSSpoof, URLSnarf -Enable/Disable CronJobs -Toggle Interfaces Available Now :) Cheers, -Foxtrot
-
Nice. I made a script called Customizer, should still be on the first page, that lets you do pretty much all of this, background image support is coming later today. Also, Seb has confirmed the adding of tab colors to the main CSS.
