Hackrylix Posted September 26, 2012 Author Share Posted September 26, 2012 ok so I've just tried to install the reaver module to usb, it says it installed but it doesn't show up in the list of Installed Infusions, also DNS Spoof no longer works, I click start but it still shows as disabled. it seems there isn't any space left on the pineapple for it to run root@Pineapple:/pineapple/dnsspoof# ./dnsspoof.sh ./dnsspoof.sh: line 2: can't create /pineapple/logs/dnsspoof.log: No space left on device root@Pineapple:/pineapple/dnsspoof# Hi, Are you talking about the v0.2 ? Can you run this command to see space related stuff : df -h[/CODE]Can you try to cleanup a bit if not enough space ? Look at the /root /pineapple/logs, ... via ssh. (I'm working on a tiny file browser/editor because the previous module doesn't seems updated).Then remove the infusion and reinstall it in internal storage.Keep me up to date.Cheers ! Quote Link to comment Share on other sites More sharing options...
kevambert Posted September 26, 2012 Share Posted September 26, 2012 Yeah Hackrylix it was v0.2 I tried to clean up some logs via ssh but for some reason they wouldnt clean, in resources in the gui it was showing rootfs 98% overlay 98%. I reflashed (2.6.4) as it was the quickest option to get it up and running ( I dont get much free time these days with studying and work and 3 kids ) Quote Link to comment Share on other sites More sharing options...
Hackrylix Posted September 26, 2012 Author Share Posted September 26, 2012 Yeah Hackrylix it was v0.2 I tried to clean up some logs via ssh but for some reason they wouldnt clean, in resources in the gui it was showing rootfs 98% overlay 98%. I reflashed (2.6.4) as it was the quickest option to get it up and running ( I dont get much free time these days with studying and work and 3 kids ) Okay, so the module works for you ? If yes : have fun and maybe give me some feedback. If no, please let me know so I can fix it in v0.3 ;-) Good luck with your studies, work and kids ^^ Cheers Quote Link to comment Share on other sites More sharing options...
kevambert Posted September 26, 2012 Share Posted September 26, 2012 Thanks hackrylix I haven't tried to reinstall the module, i will try again later and report back. Quote Link to comment Share on other sites More sharing options...
barry99705 Posted September 26, 2012 Share Posted September 26, 2012 1024x768 ? Really ? What kind of monitor is it (monochrome 12" from 1994 ?) . Just loling : D Working on this ... ASAp Well, it's not the built in display on the laptop... Quote Link to comment Share on other sites More sharing options...
Hackrylix Posted September 26, 2012 Author Share Posted September 26, 2012 (edited) Hell yeah ! Great screen install ^^ I see it's really ugly, know what you meant ;-) I'll try to do something for you (tomorrow or the day after) and keep you up to date. Cheers EDIT : Just to say that I noticed some differences between the ui on firefox and chromium. Which is your hacker browser ? Edited September 26, 2012 by Hackrylix Quote Link to comment Share on other sites More sharing options...
lostngone Posted September 27, 2012 Share Posted September 27, 2012 Check on the github wiki for a wild and unofficial way to try it (waiting for official release by admins) I'm working on promised features. Auto-refresh works and 2 switches are available. Please let me know what do you think about it ;-) Cheers ! Can you post a link the github wiki you mentioned? Quote Link to comment Share on other sites More sharing options...
Hackrylix Posted September 27, 2012 Author Share Posted September 27, 2012 Can you post a link the github wiki you mentioned? Hi, Here is the temporary wiki : https://github.com/Hackrylix/reaver/wiki I suggest you to install it from official repo (pineapple bar) since the last version is released. If you need more information, just let me know :-) Cheers Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted September 27, 2012 Share Posted September 27, 2012 First of all, redesigning the pineappleUI is pointless at this stage. Lots of cool stuff to come, the current UI won't be around that much longer. Though no ETA. Second of all, while cool that you provide a way to install your module without the pineapple bar, there is a reason why we have the pineapple bar. Now, I would say that I trust all our module developers to not put malicious code on the pineapple. However, one never knows. This is why we check the code of every submitted module for a few things. Of course, if users do not download from the bar, we cannot guarantee these modules to work / not be damaging. Please know though, that I am not saying Hackrylix or any other module developer is doing/would do this, it is just the standard warning I need to issue out ;) On a whole different note, great module! Best Regards, Sebkinne Quote Link to comment Share on other sites More sharing options...
Hackrylix Posted September 27, 2012 Author Share Posted September 27, 2012 First of all, redesigning the pineappleUI is pointless at this stage. Lots of cool stuff to come, the current UI won't be around that much longer. Though no ETA. Second of all, while cool that you provide a way to install your module without the pineapple bar, there is a reason why we have the pineapple bar. Now, I would say that I trust all our module developers to not put malicious code on the pineapple. However, one never knows. This is why we check the code of every submitted module for a few things. Of course, if users do not download from the bar, we cannot guarantee these modules to work / not be damaging. Please know though, that I am not saying Hackrylix or any other module developer is doing/would do this, it is just the standard warning I need to issue out ;) On a whole different note, great module! Best Regards, Sebkinne Hi Seb, About the ui : I totally agree with you. Maybe in a near future but not so urgent . About the module install : Of course you're right, I recommend to everybody to download the module from the pineapple bar. Just for little hackers who want to check unstable versions, they can have it by my github (NO WARRANTY). I think the most useful would be a Pineapple Framework (working on it) and a module creator with more features (framework related) Can I add a page on the official wiki about this module ? (I didn't find the way to create a page on your wiki) And thanks for support ! Cheers Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted September 27, 2012 Share Posted September 27, 2012 In regards to the Pineapple framework, well, that is coming soon with the next bartender release. Again, that has a lot more features but is not of the highest priority just yet. I would be happy to include any work you have / want to do in it though, as I don't have time to complete it in the near future. About the Wiki, you should just need to register on it, get approved and then you can create entries. Best Regards, Sebkinne Quote Link to comment Share on other sites More sharing options...
barry99705 Posted September 28, 2012 Share Posted September 28, 2012 Hell yeah ! Great screen install ^^ I see it's really ugly, know what you meant ;-) I'll try to do something for you (tomorrow or the day after) and keep you up to date. Cheers EDIT : Just to say that I noticed some differences between the ui on firefox and chromium. Which is your hacker browser ? Firefox. I'm currently running it with backtrack and haven't bothered hacking chrome to run as root. Quote Link to comment Share on other sites More sharing options...
bobbyb1980 Posted September 28, 2012 Share Posted September 28, 2012 Barry, check out this article on hardening your webcam. http://netsecurity.about.com/b/2011/03/25/how-to-secure-your-webcam-in-less-than-2-seconds.htm Quote Link to comment Share on other sites More sharing options...
barry99705 Posted September 28, 2012 Share Posted September 28, 2012 Barry, check out this article on hardening your webcam. http://netsecurity.a...n-2-seconds.htm It's actually not hooked to anything. The upper monitor is probably 8 years old, that cam is 320X240 res! Quote Link to comment Share on other sites More sharing options...
PineDominator Posted October 8, 2012 Share Posted October 8, 2012 (edited) I can't get this module to work, It looks sick and does function until I search for networks? I have tried so many things like disableing karma and hostapd, using an alfa NHA to no avail? even went into the wireless config and changed radio1 "NHA" from ap to sta and no luck? Also I am createing monitor interfaces. Edited October 8, 2012 by petertfm Quote Link to comment Share on other sites More sharing options...
kevambert Posted October 8, 2012 Share Posted October 8, 2012 (edited) you need to bring down wlan0 and bring it back up again, ifconfig wlan0 down, ifconfig wlan0 up it will then find all ap's in range Edited October 8, 2012 by kevambert Quote Link to comment Share on other sites More sharing options...
Hackrylix Posted October 8, 2012 Author Share Posted October 8, 2012 Hi, sorry for the late response. So petertfm, I'm sorry but I don't understand what you mean. To get a list of ap : use the network-manager module and change from 'access point' to ad-hoc or client. Then, go back in the reaver module and try a scan (select the right interface in the list : it is used to scan) To start an attack : Start your mon interface (via the button) or select the right one (in the monitored interface list) In the ap list, click on a row and then, click on the 'start attack' button. Use auto-refresh and wait for reaver to crack the key (can be long). If you still have issue, please let me know... Cheers Quote Link to comment Share on other sites More sharing options...
PineDominator Posted October 8, 2012 Share Posted October 8, 2012 Hi, sorry for the late response. So petertfm, I'm sorry but I don't understand what you mean. To get a list of ap : use the network-manager module and change from 'access point' to ad-hoc or client. Then, go back in the reaver module and try a scan (select the right interface in the list : it is used to scan) To start an attack : Start your mon interface (via the button) or select the right one (in the monitored interface list) In the ap list, click on a row and then, click on the 'start attack' button. Use auto-refresh and wait for reaver to crack the key (can be long). If you still have issue, please let me know... Cheers I am not sure if it's working the right way for me but It says reaver is installed but it is not. I can see my external alfa card "NHA" but it is red "down" why cant the module bring it up? I have to ssh in and "ifconfig wlan1 up" then it will scan for networks problem #2 I hit start and nothing happens? I auto refresh the log and nothing? I go to the resource tab in the ui and I don't see reaver running? Quote Link to comment Share on other sites More sharing options...
Hackrylix Posted October 8, 2012 Author Share Posted October 8, 2012 (edited) I am not sure if it's working the right way for me but It says reaver is installed but it is not. I can see my external alfa card "NHA" but it is red "down" why cant the module bring it up? I have to ssh in and "ifconfig wlan1 up" then it will scan for networks problem #2 I hit start and nothing happens? I auto refresh the log and nothing? I go to the resource tab in the ui and I don't see reaver running? Ok, First, the interfaces managing is coming (in v0.3 ifconfig up/down) [EDIT] better to see if the pineapple framework can do this (a common way on all modules). Else I'll implement it in the module :( Then, for #2, I have a little idea but I'm going to investigate and try to find out what's wrong. Stay tuned, I'll try to release the fix into the v0.3 asap (with other minor bug-fix) Cheers Edited October 8, 2012 by Hackrylix Quote Link to comment Share on other sites More sharing options...
kevambert Posted October 8, 2012 Share Posted October 8, 2012 same here I dont think reaver is actually running it creates a log file but doesnt fill it with anything Quote Link to comment Share on other sites More sharing options...
kevambert Posted October 10, 2012 Share Posted October 10, 2012 (edited) It would be great to see this module working by it self but the module doesn't start reaver, I had to click attack target then run the same command via ssh (putty), reaver -i mon0 -b 00:1f:xx:xx:xx:xx -S -a -vv >> /usb/reaver-00:1f:xx:xx:xx:xx.log -D 7 I also changed the log path to usb as it gets very large Edited October 10, 2012 by kevambert Quote Link to comment Share on other sites More sharing options...
loozr Posted October 11, 2012 Share Posted October 11, 2012 (edited) I am not sure if it's working the right way for me but It says reaver is installed but it is not. I can see my external alfa card "NHA" but it is red "down" why cant the module bring it up? I have to ssh in and "ifconfig wlan1 up" then it will scan for networks problem #2 I hit start and nothing happens? I auto refresh the log and nothing? I go to the resource tab in the ui and I don't see reaver running? I have the same problem, but I have the AWUS036H and in my case neither networkmanager nor reaver is able to bring the device up. same here I dont think reaver is actually running it creates a log file but doesnt fill it with anything It would be great to see this module working by it self but the module doesn't start reaver, I had to click attack target then run the same command via ssh (putty), reaver -i mon0 -b 00:1f:xx:xx:xx:xx -S -a -vv >> /usb/reaver-00:1f:xx:xx:xx:xx.log -D 7 I also changed the log path to usb as it gets very large I also had problems getting reaver to actually run with this module, it would create a logfile, but the logfile would be empty, and reaver would not be running. However I managed get it working, I'm not sure if this could be related to the reinstall of reaver that I did after the module was installed, but it's running fine with my setup now. EDIT, I guess the logfile may should be placed on the USB, and rather symlink'd to the pineapple folder if needed. Edited October 11, 2012 by loozr Quote Link to comment Share on other sites More sharing options...
kevambert Posted October 15, 2012 Share Posted October 15, 2012 I upgraded to 2.7 and removed reaver/wash from USB and installed it to the pineapple itself, it runs fine now however I still have to bring wlan0 down and up again, it's a great module Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted October 15, 2012 Share Posted October 15, 2012 I upgraded to 2.7 and removed reaver/wash from USB and installed it to the pineapple itself, it runs fine now however I still have to bring wlan0 down and up again, it's a great module Good to hear! About bringing wlan0 down and up again, maybe Hackrylix can add that in the next release. Best Regards, Sebkinne Quote Link to comment Share on other sites More sharing options...
Hackrylix Posted October 15, 2012 Author Share Posted October 15, 2012 Hi everybody, I'm sorry for not answering faster, I was so busy... I just upgraded to 2.7.0 The v0.3 is almost ready (just need a little layout modification for our friend "the multi-lowres-screen guy" aka barry ;-) ) It fixes the bug about the launching of the reaver command (found the source) and add the ability to down/up a wlan card (as recently requested ;-)) It will be submitted tomorrow if I find a bit of time to do it. Sorry again for the lack of follow up, I'm in a very busy period. Cheers ! PS : The v0.4 will add the possibility to change the log path to usb (as loozr suggests) and clear/delete logs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.