Whistle Master Posted January 13, 2015 Author Share Posted January 13, 2015 I'm using airodump to produce a .cap file and then use wash to read it #wash --help -f, --file [FILE1 FILE2 FILE3 ...] Read packets from capture files the infusion looks like it does thibgs different. It doesn't run a wash scan, but rather scans via iw, saves an output and parses the output with wash -C -f.With that in mind, I believe if you keep the wlan1 ( or whichever wlan iface you use to scan ) up, it would bring the results. Ill test annd post back Quote Link to comment Share on other sites More sharing options...
DataHead Posted January 13, 2015 Share Posted January 13, 2015 I'm using airodump to produce a .cap file and then use wash to read it #wash --help -f, --file [FILE1 FILE2 FILE3 ...] Read packets from capture files don't know where I got iw from lol Quote Link to comment Share on other sites More sharing options...
lunokhod Posted January 18, 2015 Share Posted January 18, 2015 (edited) I've been playing around with the WPS infusion these last few days... it seems to be working mostly OK. I have an external radio (wlan2) a client interface (disabled), wlan0 is also disabled (no Pineapple AP operating), I'm connected to the WiFi Pineapple via eth0. Reaver and Bully are installed and working (as confirmed with a SSH session). enable wlan1, enable mon0 on wlan1, scan for WPS vulnerable access points, pick a "target", bring down wlan1, select program, monitor interface, ensure BSSID, SSID and channel are correct, Press Start! Reaver works as expected. Bully works but does not seem to update the xxxxxxxxxx.run file in /root/.bully/ properly. The .run file gets created, but there are times when the xxxxxxxxxxxx.run file appears to get corrupted (or not closed off properly) and Bully will not start when you try and "crack" that AP mac address again. Has anyone else seen this? I seem only to be able to run Bully (via WPS infusion) only once per WiFi Pineapple boot... after stopping it (within the infusion), it does not start again... although I can start a CLI Bully session and it will continue. I've seen the posts in this thread about creating symlinks for reaver and bully... does the WPS infusion work "better" when installed in internal memory than the SD card? Lunokhod. Edited January 18, 2015 by lunokhod Quote Link to comment Share on other sites More sharing options...
Retr0 Posted January 24, 2015 Share Posted January 24, 2015 Hello, i am a newbie so i don't know a lot of what i am doing but i know my way around kali linux and used reaver before but i was just wondering how i can use reaver with wifi Pineapple I got an user infusion of WPS that has reaver on it but I don't know why whenever i try to use it it dose not work hear is what i am getting ( if you can't see image open it in a new tab) and i don't know how to make it work. Will someone help me ? Quote Link to comment Share on other sites More sharing options...
cheeto Posted January 24, 2015 Share Posted January 24, 2015 i made a step by step tutorial on how to use reaver on the mkv. All credit goes to "raz0r" for teaching me how to use it. https://forums.hak5.org/index.php?/topic/32748-howto-mark-v-reaver/ If reaver isn't giving you the desired results, it's probably because: The AP isn't WPS. The AP signal quality is rather low. Cheers Quote Link to comment Share on other sites More sharing options...
Retr0 Posted January 24, 2015 Share Posted January 24, 2015 Hello, i used reaver in the past but i was wondering how i can make it work with the Infusion "WPA" i start up reaver and when i do this it fails to associate with the network, i thought it was just the network so i booted into Kali Linux and found the password fine with reaver so i know the network vulnerable. Hear is the Error i get (If you can't see it right click on image and open in new tab) Quote Link to comment Share on other sites More sharing options...
cheeto Posted January 24, 2015 Share Posted January 24, 2015 Far as i know, reaver only work with WPS. Quote Link to comment Share on other sites More sharing options...
Retr0 Posted January 24, 2015 Share Posted January 24, 2015 (edited) yeah it works on routers with the Wi-Fi protected setup exploit i already crack the wifi network with Kali that i am trying to crack with the wifipineapple so i know it has the exploit but i am trying to see if the wifi pineapple can do it. (hint why i am cracking the same network as i did with Kali) So dose anyone else know what i am doing wrong or how to do it a different way Edited January 24, 2015 by Prooakley Quote Link to comment Share on other sites More sharing options...
DataHead Posted January 24, 2015 Share Posted January 24, 2015 Be sure you bring down your mon corresponding interface, wlan1, wlan2 etc Quote Link to comment Share on other sites More sharing options...
ARDETROYA Posted January 31, 2015 Share Posted January 31, 2015 (edited) @All: could you try the following steps and report the output ? - Restart your pineapple - Connect through SSH: # ifconfig wlan1 down # airmon-ng start wlan1 # wash -i mon0 -C Can you see APs ? I don't want to be mean but... because you can't run the infusion does not mean there is a problem with the infusion itself. The problem could be from the binaries used (such as wash or reaver). All the testing I'm doing on my side report correctly all WPS enabled APs. That's said, I really want to make it work for you guys, just help me trying to shape the problem you're facing ! Hi wishtle Master... Thanx once more for your effort!!! Sorry that i have been a little bussy last months... I couldn´t see any AP but I used the commands that DataHead said and I could it make it work... Hope that helps. I´m using firmware 2.2.0 and infusion version: 1.9. If you have installed reaver to the sd, it seems to not set itself up properly in the way it symlinks from the sd. If installed to internal its all up and fine. My proper sd install chain is such. ssh into the pineapple and Copy paste the following mkdir /etc/reaver opkg update opkg -d sd install reaver ln -s /sd/etc/reaver/reaver.db /etc/reaver/ ln -s /sd/usr/bin/reaver /usr/bin/ ln -s /sd/usr/bin/wash /usr/bin/ ln -s /sd/usr/lib/opkg/info/reaver.control /usr/lib/opkg/info/ ln -s /sd/usr/lib/opkg/info/reaver.list /usr/lib/opkg/info/ #BULLY opkg update opkg -d sd install bully ln -s /sd/usr/bin/bully /usr/bin/ ln -s /sd/usr/lib/opkg/info/bully.control /usr/lib/opkg/info/ ln -s /sd/usr/lib/opkg/info/bully.list /usr/lib/opkg/info/ Thanx DataHead for the informatión... It seems that it´s working but I have to do more test... Thanx for shareing ;)! Using WLAN1 and MON0 of WLAN1 ;) Edited January 31, 2015 by ARDETROYA Quote Link to comment Share on other sites More sharing options...
kalimer Posted February 3, 2015 Share Posted February 3, 2015 i'm using bully on a network, reaver is not working on it but bully is. i use the command line: bully mon0 -b xxxxxxxxxxxxxxxxx -W --pin1delay 60,1 -c 3 bully is working, but i've a problem: it starts good, then after some keys, it starts with a lot of auth/assn timeout errors, and stops to try new keys. wps is never locking with this delay, but i get A LOT "Received disassociation/deauthentication from the AP" and "Sent packet not acknowledged after 2 attempts" errors. my network is here right in front of me so no distance problem. if i stop CTRL.C bully and then i start again after few seconds (like 10 seconds), the process begin again with no troubles, but then he will stop getting a lot of timeout errors. [+] Loading randomized pins from '/root/.bully/pins'[!] Restoring session from '/root/.bully/00223f3cf5c8.run'[+] Index of starting pin number is '0291000'[+] Last State = 'NoAssoc' Next pin '70808261'[+] Rx( M5 ) = 'Pin1Bad' Next pin '57948263'[+] Rx( M5 ) = 'Pin1Bad' Next pin '80368267'[+] Rx( M5 ) = 'Pin1Bad' Next pin '46648266'[+] Rx( M5 ) = 'Pin1Bad' Next pin '91118264'[+] Rx( Assn ) = 'Timeout' Next pin '91118264'[+] Rx( M5 ) = 'Pin1Bad' Next pin '17198264'[+] Rx( Assn ) = 'Timeout' Next pin '17198264'[+] Rx( Auth ) = 'Timeout' Next pin '17198264'[+] Rx( M5 ) = 'Pin1Bad' Next pin '62788267'[+] Rx( Assn ) = 'Timeout' Next pin '62788267'[+] Sent packet not acknowledged after 2 attempts[+] Tx(DeAuth) = 'Timeout' Next pin '62788267'[+] Sent packet not acknowledged after 2 attempts[+] Tx(DeAuth) = 'Timeout' Next pin '62788267'[+] Sent packet not acknowledged after 2 attempts[+] Tx(DeAuth) = 'Timeout' Next pin '62788267'[!] Received disassociation/deauthentication from the AP[+] Tx(DeAuth) = 'NoAssoc' Next pin '62788267'[+] Rx( Auth ) = 'Timeout' Next pin '62788267'[+] Rx( Assn ) = 'Timeout' Next pin '62788267'[+] Sent packet not acknowledged after 2 attempts[+] Tx( Strt ) = 'Timeout' Next pin '62788267'[+] Rx( ID ) = 'Timeout' Next pin '62788267'[+] Rx( Assn ) = 'Timeout' Next pin '62788267'[+] Rx( Auth ) = 'Timeout' Next pin '62788267'[+] Rx( Auth ) = 'Timeout' Next pin '62788267'[+] Rx( Auth ) = 'Timeout' Next pin '62788267'[+] Rx(M2D/M3) = 'Timeout' Next pin '62788267'[+] Rx( Assn ) = 'Timeout' Next pin '62788267'[+] Rx( Auth ) = 'Timeout' Next pin '62788267'[+] Rx( Assn ) = 'Timeout' Next pin '62788267'[+] Rx( Auth ) = 'Timeout' Next pin '62788267'[!] Received disassociation/deauthentication from the AP[+] Rx( Auth ) = 'NoAssoc' Next pin '62788267'[+] Rx( Assn ) = 'Timeout' Next pin '62788267'[+] Rx( M5 ) = 'Pin1Bad' Next pin '41578261'[+] Rx( Assn ) = 'Timeout' Next pin '41578261'[+] Rx( M5 ) = 'Pin1Bad' Next pin '34408261'[+] Sent packet not acknowledged after 2 attempts[+] Tx( ID ) = 'Timeout' Next pin '34408261'[+] Rx( Auth ) = 'Timeout' Next pin '34408261'[+] Sent packet not acknowledged after 2 attempts[+] Tx( Auth ) = 'Timeout' Next pin '34408261'[+] Rx( Auth ) = 'Timeout' Next pin '34408261'[+] Sent packet not acknowledged after 2 attempts[+] Tx(DeAuth) = 'Timeout' Next pin '34408261'[+] Rx( Assn ) = 'Timeout' Next pin '34408261'[+] Rx( Assn ) = 'Timeout' Next pin '34408261'[+] Rx( Assn ) = 'Timeout' Next pin '34408261'[+] Sent packet not acknowledged after 2 attempts[+] Tx(DeAuth) = 'Timeout' Next pin '34408261'[+] Rx( Auth ) = 'Timeout' Next pin '34408261'[+] Rx( Auth ) = 'Timeout' Next pin '34408261'[!] Received disassociation/deauthentication from the AP[+] Rx( Auth ) = 'NoAssoc' Next pin '34408261'[+] Sent packet not acknowledged after 2 attempts[+] Tx( Auth ) = 'Timeout' Next pin '34408261'[+] Sent packet not acknowledged after 2 attempts[+] Tx(DeAuth) = 'Timeout' Next pin '34408261'[+] Rx( Auth ) = 'Timeout' Next pin '34408261'[+] Rx( ID ) = 'Timeout' Next pin '34408261'[+] Rx( Assn ) = 'Timeout' Next pin '34408261'[+] Sent packet not acknowledged after 2 attempts[+] Tx( Strt ) = 'Timeout' Next pin '34408261'[+] Rx( Auth ) = 'Timeout' Next pin '34408261'[+] Rx( Assn ) = 'Timeout' Next pin '34408261'[+] Rx( Auth ) = 'Timeout' Next pin '34408261'[+] Rx( Assn ) = 'Timeout' Next pin '34408261'[+] Rx( M5 ) = 'Pin1Bad' Next pin '37978266'[+] Sent packet not acknowledged after 2 attempts[+] Tx( Strt ) = 'Timeout' Next pin '37978266'[!] Received disassociation/deauthentication from the AP[+] Rx( Assn ) = 'NoAssoc' Next pin '37978266'[+] Rx( Assn ) = 'Timeout' Next pin '37978266'[+] Rx( Assn ) = 'Timeout' Next pin '37978266'[+] Rx( M5 ) = 'Pin1Bad' Next pin '57778266'[+] Rx( Assn ) = 'Timeout' Next pin '57778266'[+] Rx( M5 ) = 'Pin1Bad' Next pin '29028269'[+] Sent packet not acknowledged after 2 attempts[+] Tx( Strt ) = 'Timeout' Next pin '29028269'[+] Rx( Auth ) = 'Timeout' Next pin '29028269'[!] Received disassociation/deauthentication from the AP[+] Rx( Assn ) = 'NoAssoc' Next pin '29028269'[+] Rx( Auth ) = 'Timeout' Next pin '29028269'[+] Rx( M5 ) = 'Pin1Bad' Next pin '88218267'[+] Rx( M5 ) = 'Pin1Bad' Next pin '81158263'[+] Rx( Auth ) = 'Timeout' Next pin '81158263'[+] Rx( Auth ) = 'Timeout' Next pin '81158263'[!] Received disassociation/deauthentication from the AP[+] Tx( Auth ) = 'NoAssoc' Next pin '81158263'[+] Sent packet not acknowledged after 2 attempts[+] Tx(DeAuth) = 'Timeout' Next pin '81158263'[+] Rx( M5 ) = 'Pin1Bad' Next pin '92988262'[+] Rx( Assn ) = 'Timeout' Next pin '92988262'[+] Rx( Auth ) = 'Timeout' Next pin '92988262'[+] Rx( ID ) = 'Timeout' Next pin '92988262'[+] Sent packet not acknowledged after 2 attempts[+] Tx( Strt ) = 'Timeout' Next pin '92988262'[+] Rx( ID ) = 'Timeout' Next pin '92988262'[+] Rx( Assn ) = 'Timeout' Next pin '92988262'[+] Rx( Auth ) = 'Timeout' Next pin '92988262'[+] Rx( M5 ) = 'Pin1Bad' Next pin '77548269' as you can see i got keys tested, but sometimes it starts to give a lot of timeout error and process stops. Quote Link to comment Share on other sites More sharing options...
Lord_Snake Posted March 24, 2015 Share Posted March 24, 2015 Dear Community, Unfortunatly I don't have the skills to do it, so is it posible to a dev port/create an infusion with this script? I'm sure that it would be a great addition to the mark V :D Quote Link to comment Share on other sites More sharing options...
fringes Posted March 24, 2015 Share Posted March 24, 2015 Have you looked through the WPS infusion support thread? https://forums.hak5.org/index.php?/topic/31454-support-wps/ It's huge I know, but you might find some similar discussions there. (I think that's where I saw it.) Quote Link to comment Share on other sites More sharing options...
student13 Posted March 25, 2015 Share Posted March 25, 2015 Ok, thanks I saw the video, but still have a question , when the wps infusion is put into monitor mode , and detects wps, does it, actually detect differentiate between wps 1.0 ie a vulnerable version of wps, versus a non vulnerable version ( like wash), or does it detect WPS service, irrespective version vulnerability. Quote Link to comment Share on other sites More sharing options...
fringes Posted March 25, 2015 Share Posted March 25, 2015 Sorry Lord_Snake, I actually referred you back to this topic. (It's the medication.) But look through this topic because I believe something like this script has been discussed here. Quote Link to comment Share on other sites More sharing options...
DataHead Posted March 25, 2015 Share Posted March 25, 2015 (edited) If you have installed reaver to the sd, it seems to not set itself up properly in the way it symlinks from the sd. If installed to internal its all up and fine. My proper sd install chain is such. ssh into the pineapple and Copy paste the following mkdir /etc/reaver opkg update opkg -d sd install reaver ln -s /sd/etc/reaver/reaver.db /etc/reaver/ ln -s /sd/usr/bin/reaver /usr/bin/ ln -s /sd/usr/bin/wash /usr/bin/ ln -s /sd/usr/lib/opkg/info/reaver.control /usr/lib/opkg/info/ ln -s /sd/usr/lib/opkg/info/reaver.list /usr/lib/opkg/info/ Been having issue's with reaver and bully for a while but after doing these commands all worked great, reaver/bully both run as they should. The only issue i'm having now is, there is no infusion installed for them, not a major one as i prefer cli anyways. ~Thanks DataHead for the fix's :) If you are having issues with wash, please do the above. The wps infusion uses wash to gather the needed wps info Edited March 25, 2015 by DataHead Quote Link to comment Share on other sites More sharing options...
SaAlWe Posted April 5, 2015 Share Posted April 5, 2015 Good day , I have the WIFI PINEAPPLE been around for a long time and have tried them and packed away as I NEVER did not get a single time to run WPS . Today I am a little busy with her I have my own wireless WPS ACTIVATED ! AND NOTHING HAPPENS ! I have now tried it many times but it just is not what is really a pity ! Have paid so much for the router and it just does NOT EVEN !Sorry for my English google transla ... ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- wps log_1428224057.log [April 05 2015 09:19:41] [+] Waiting for beacon from 1C:C6:3C:14:DE:F0 [+] Associated with 1C:C6:3C:14:DE:F0 (ESSID: SaAlWe) [+] 0.00% complete @ 2015-04-05 08:54:38 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:54:54 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:55:10 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:55:26 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:55:43 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:55:58 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:56:15 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:56:31 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:56:47 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:57:08 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:57:24 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:57:41 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:58:02 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:58:19 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:58:35 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:58:51 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:59:07 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:59:23 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:59:39 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 08:59:56 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:00:16 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:00:32 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:00:48 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:01:04 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:01:24 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:01:41 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:01:57 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:02:13 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:02:33 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:02:49 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:03:10 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:03:42 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:03:58 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:04:15 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:04:31 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:04:47 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:05:02 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:05:19 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:05:35 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:05:51 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:06:07 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:06:23 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:06:40 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:06:56 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:07:12 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:07:28 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:07:43 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:07:59 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:08:16 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:08:37 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:08:58 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:09:15 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:09:31 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:09:48 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:10:11 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:10:28 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:10:50 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:11:07 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:11:22 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:11:38 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:11:55 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:12:11 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:12:27 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:12:43 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:13:04 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:13:20 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:13:41 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:13:56 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:14:11 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:14:27 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:14:43 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:14:58 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:15:14 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:15:29 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:15:44 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:16:05 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:16:20 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:16:36 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:16:51 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:17:06 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:17:22 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:17:37 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:17:53 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:18:08 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:18:23 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:18:39 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:18:55 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:19:10 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:19:25 (0 seconds/pin) [+] 0.00% complete @ 2015-04-05 09:19:41 (0 seconds/pin) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote Link to comment Share on other sites More sharing options...
SaAlWe Posted April 5, 2015 Share Posted April 5, 2015 And when i use bully the same sh... ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ wps log_1428225656.log [April 05 2015 09:24:15] [!] Bully v1.0-22 - WPS vulnerability assessment utility [+] Switching interface 'mon0' to channel '3' [!] Using '00:13:37:93:54:4c' for the source MAC address [+] Datalink type set to '127', radiotap headers present [+] Scanning for beacon from '1c:c6:3c:14:de:f0' on channel '3' [+] Got beacon for 'SaAlWe' (1c:c6:3c:14:de:f0) [+] Loading randomized pins from '/root/.bully/pins' [+] Index of starting pin number is '0000000' [+] Last State = 'NoAssoc' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( M2 ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( M2 ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx(DeAuth) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'EAPFail' Next pin '01964301' [+] Rx( Assn ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( Auth ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( M4 ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( M2 ) = 'Timeout' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( Auth ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( Auth ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( M2 ) = 'Timeout' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx(DeAuth) = 'Timeout' Next pin '01964301' [+] Rx( Auth ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( Auth ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx( Auth ) = 'Timeout' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [!] Received M2D or out of sequence WPS Message [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( M2 ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx(DeAuth) = 'Timeout' Next pin '01964301' [+] Rx( Assn ) = 'Timeout' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( Strt ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'EAPFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( Auth ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'Timeout' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Sent packet not acknowledged after 3 attempts [+] Tx( M2 ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [!] Received M2D or out of sequence WPS Message [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx( ID ) = 'Timeout' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' [+] Rx(M2D/M3) = 'WPSFail' Next pin '01964301' ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Why only trying ONE DAMN PIN ? Quote Link to comment Share on other sites More sharing options...
ZaraByte Posted April 6, 2015 Share Posted April 6, 2015 Likely a signal issue that appears to be the problem with these devices the antenna and also the network your targeting are possibly the reason for your looping only thing you really can do is check the signal of the AP you're targeting make sure its not higher then -50 and not lower then -14 a good signal is normally around -40's to low of a signal and to high of a signal can become a problem. Quote Link to comment Share on other sites More sharing options...
SaAlWe Posted April 6, 2015 Share Posted April 6, 2015 No ABSOLUTELY NO SIGNAL ERROR! Connection is more than perfect. I have a Custom Gaming Router connected DONE EXTREMELY EASY! Wifi Pineapple connected complicated complicated start and and and ... Over and over and over again errors! Normally you should something not at all agree with such a purchase price! NO MATTER WHAT SETTING NO MATTER WHAT NETWORK! IT'S NOT WORKING! The support for NETDUMA R1 is not only faster but also much better. If I buy something and pay so much for it I will proper support. Then comes the answer then there must be a signal .... I do now for so many years things with wlan and then you get there answer as if you can not even start a cell phone ... This note is not evil but simply reflects only my personal opinion wieder.Ich think the faster money flows more slowly, the support mfg saalwe ---------------------------------------------------------------------------------------------------------------------------------------------------- wps log_1388535330.log [January 01 2014 00:36:12] [+] Waiting for beacon from 1C:C6:3C:14:DE:F0 [+] Associated with 1C:C6:3C:14:DE:F0 (ESSID: SaAlWe) [+] 0.05% complete @ 2014-01-01 00:15:54 (3 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:16:09 (3 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:16:45 (7 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:17:16 (10 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:17:53 (14 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:18:24 (17 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:18:55 (20 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:19:32 (24 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:20:03 (27 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:20:39 (30 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:21:10 (33 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:21:41 (37 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:22:17 (40 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:22:52 (44 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:23:23 (47 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:23:55 (50 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:24:26 (53 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:24:57 (56 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:25:29 (59 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:26:00 (62 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:26:31 (66 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:27:08 (69 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:27:54 (74 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:28:25 (77 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:29:02 (81 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:29:33 (84 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:30:04 (87 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:30:40 (90 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:31:11 (94 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:31:42 (97 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:32:19 (100 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:32:50 (103 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:33:21 (107 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:33:52 (110 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:34:33 (114 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:35:09 (117 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:35:41 (121 seconds/pin) [+] 0.09% complete @ 2014-01-01 00:36:12 (124 seconds/pin) ---------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote Link to comment Share on other sites More sharing options...
fringes Posted April 6, 2015 Share Posted April 6, 2015 (edited) mfg saalwe, This is a community forum. If you're friendly, provide details, and put some of those logs in "spoiler tags" (under "Special BBCode"), people (other pineapple owners or the infusion author) will read your post and try to help. Have you verified that the routers you are trying to exploit are even vulnerable? Edited April 6, 2015 by fringes Quote Link to comment Share on other sites More sharing options...
raz0r Posted May 14, 2015 Share Posted May 14, 2015 Please can someone make this into an infusion http://lampiweb.com/foro/index.php/topic,13726.0.html?PHPSESSID=3f38314583e02ad92aebba11cc9f68ff https://github.com/wiire/pixiewps https://github.com/t6x/reaver-wps-fork-t6x Quote Link to comment Share on other sites More sharing options...
fringes Posted May 14, 2015 Share Posted May 14, 2015 Seems like it should be added to the WPS Infusion. Quote Link to comment Share on other sites More sharing options...
fringes Posted May 14, 2015 Share Posted May 14, 2015 Hey Whistle Master, There's been a lot of buzz about the pixie dust attack. It seems like something that would fit in the WPS infusion. Have you (or would you) consider adding it? Quote Link to comment Share on other sites More sharing options...
cheeto Posted May 14, 2015 Share Posted May 14, 2015 DATAHEAD is working on Pixiscript. He needs to iron out some details. But its coming Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.