b0N3z

This Module will help you get where you want but you'll have to manually install it.

The pineapple will not work if your using your home routers ap as with PineAp. Your home router has a password and the pineapple takes advantage of you having saved open APs on your devices and it says " hey im that openap, connect to me" . So long story short, I won't replicate a password protected AP without a password.

Looking for clues.

Error 500 on the website

Yea I just copied over the payload I already used on switch 2 so now that it's up I'm going to play around a bit. I way over thought that one lol

am i maybe doing it on the wrong root directory? I ssh to the bunny and cd / mkdir /payload/arming nano payload.txt does this directory need to be on the storage part of the partition EDIT: I over complicated this setup and have now figured it out. thanks lol

wget http://packetsquirrel.com/ps.sh

For some reason I make this directory /payloads/arming/payload.txt to change arming mode from serial storage to ecm_ethernet and storage and use a standard payload of LED B SLOW ATTACKMODE ECM_ETHERNET STORAGE the bash bunny doesn't recognize it and keeps the default serial storage payload after a reboot. Am I doing something wrong or is there a step I'm missing?

if your computer is not supplying enough power to the pineapple it will do funny things. the nano needs 5v2a so depending on your usb ports you might need to use 2 or 1 and a battery. I usually always connect mine with a battery that is 5v2a just to make sure its not going to do anything funky on me.

how are you powering the nano?

it will work on any firmware. Just make sure you have that .bin file and the inject.bin file.

check this out https://ducktoolkit.com/vidpid/ . find the device you want and download the .bin and place it next to your inject.bin. boom you have a different keyboard.

This thread will help

have you tried to use a live usb and run kali that way? It is way better than messing with a vm if you are unfamiliar with vm software.

its amazing, been using it ever since lol

most of the modules are basic programs that are used on kali, so if you can watch a video or read an article or the man page for say mdk3, that would be the deauth module. so anything that mdk3 can do on kali, deauth can do on the pineapple. thats just an example.

PID 0273 . VID 05ac . this is a 2015 mbp

I had created a list to get around using the above list. My list is for most used devices not all. https://goo.gl/IrHN8o

you might need to use both usb from the y cable

its an openwrt router so anything you can do on Openwrt

you dont have enough power going to the nano. it needs 5v2a which isn't always what usb on a pc is. which can cause problems while using the pineapple nano.

if all your doing is setting up the bunny for future attacks then why does it matter. change your payload when your done.

just set a payload on switch 1 or 2 with RNIDS_ETHER and STORAGE

I think the point was to keep it as small as possible with big power. and thats what they did. Why add wifi and other things that will eat power and cause more heat?

Just got around to messing with this and you are correct, this is awesome, definitely going all my RPi.