Jump to content

LowValueTarget

Active Members
  • Posts

    80
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by LowValueTarget

  1. I've noticed the forums kinda died and the Github pull requests haven't been accepted/reviewed in months. What's the deal?
  2. Interesting -- good to know.
  3. It's connecting to the phone? Of course ADB will run -- but will it connect?
  4. In order to work with ADB, the BashBunny needs to be a Host -- currently , there is no way to make the BB run as a host afaik.
  5. There are numerous payloads with checks built in. My PSH Exec payload for instance, waits for a file to be created on the share for instance. https://gist.github.com/hink/cc0a0422728d1ee77c89b528d3b62c3a
  6. I remember talk a while ago about potentially adding a HOST attack mode where the bash bunny would essentially become a USB host. This would facilitate attacks on phones and other devices that normally act as USB clients. Has there been any progress made on this front?
  7. I've updated my psh_DownloadExecSMB payload to allow for exfiltration. psh_DownloadExecSMB will take any powershell payload, execute it and alert via green LED when it's completed. All file transfers happens over SMB to the Bash Bunny. In order to exfil data, have your powershell payload upload to \\172.16.64.1\s\l\ -- this will be copied to the BB as loot. Bonus: Because this payload uses SMB, any captured SMB credentials will be stored as loot. My Repo: https://github.com/hink/bashbunny-payloads/tree/payload/pshExecFixes/payloads/library/execution/psh_DownloadExecSMB Pull Request: https://github.com/hak5/bashbunny-payloads/pull/268
  8. I've updated one of my payloads recently that might be able to help out. Check out https://github.com/hak5/bashbunny-payloads/pull/268 (it hasn't been merged yet) for an updated psh_DownloadExecSMB. psh_DownloadExecSMB essentially runs a powershell payload from the BB using SMB. Because it's using SMB, it makes it trivial to exfil data. Also, since the powershell payload is abstracted from the BB payload, your possibilites are endless. The payload waits for the powershell to complete, and then changes the LED green. If you want to exfil data, put that corresponding powershell in p.txt and upload to \\172.16.64.1\s\l\ -- this will be copied to the BB as loot.
  9. Take a step back and think about what you are asking. Ask it this way -- "Am I able to accomplish this with a keyboard, a mouse, a network accessible linux computer, a serial device, a usb ethernet adapater and a thumb drive?"
  10. Short Answer: No (not that i am aware of) Long Answer: The BashBunny is not some magic hacking device. Think of it this way. If you have a linux computer, a USB flash drive, a USB keyboard, a USB ethernet adapter, and a USB serial device, would you be able to accomplish what you are trying to accomplish? That's basically what the bashbunny is, with automation capabilities. Theoretical: You might be able to use responder to get a password hash from the target, then crack it or pass it to the victim assuming they aren't using SMBV2 and have SMB file sharing enabled. Even then, you'd be limited to file location if the user is not an Administrator.
  11. Like Unixnerd777 said, use SMB, FTP, HTTP, or some other delivery device and forego the storage method.
  12. Take a look at the following payload. It sets up a FireTV (android device) to download and install an APK. https://github.com/hak5/bashbunny-payloads/tree/master/payloads/library/android/fireytv
  13. There's a payload floating around that uses adb remote to connect to an android device. Based on my ideas, there's really not much you can do until BashBunny gets USB host support. I have an idea that will try ADB (assuming the victim phone has USB Debugging enabled) first, then fallback to MTP if ADB is not enabled. This would allow relatively plug-n-play exfil of user data.
  14. Yes as of 1.3 i believe.
  15. In your payload.txt, you can remove about 10 lines and replace it with one. https://gist.github.com/hink/a8b57d16234042e5adc0182e5e1779c7 GET SWITCH_POSITION takes care of the logic of finding the switch position for you. It's a default extension.
  16. You could always clone the git repos on your local device, copy them to the /tools folder on the BB USB storage, and plug the device into power in arming mode. This will copy all the files from /tools on usb storage to /tools on the BB system partition. If you wanted to complete the install, you could ssh/screen into the bunny and run the ./setup.py from the CLI.
  17. My mistake -- the extension is .txt -- edited the original post.
  18. Bumping this to the top for visibility -- it seems that people are still needing assistance.
  19. You could always download the source and compile locally on the bunny.
  20. This is great! Two quick questions. 1. Does ATTACKMODE OFF essentially turn the BB into a USB host? 2. When using RNDIS_SPEED_XX, is RNDIS_ETHERNET a prerequisite, or are they mutally exclusive? Thanks,
  21. bb.sh never worked for me. Here's as simple script I made to make it work for me #!/bin/bash ifconfig $2 172.16.64.64 netmask 255.255.255.0 iptables -X iptables -F iptables -A FORWARD -i $1 -o $2 -s 172.16.64.0/24 -m state --state NEW -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Then I just feed it the wan iface and lan iface sh ./bbshare.sh eth0 eth1
  22. This could easily be an extension -- WAIT_FOR_IP
  23. From the changelog - User configuration file - A config.txt is now found on the root of the Bash Bunny's storage partition - This config.txt is sourced before payloads are executed, allowing global configurations - By default the DUCKY_LANG command is run to set the keyboard to 'us'. - NOTE: settings in config.txt will be overwritten if a payload decides to do so - NOTE: config.txt will currently not survive factory resets or firmware upgrades. This will change in the future
  24. Great idea -- good stuff.
×
×
  • Create New...