Jump to content

Geoff0ne

Active Members
 View Profile  See their activity

  • Posts

    85

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Geoff0ne

  1. Geoff0ne
    Hi, Anyone else experiencing this? I check data on the SD via SCP and its sure enough still there.
  2. Geoff0ne
    Excellent thanks that actaully worked. I rebooted. Did a changemac -c then changemac -r SSID is now broadcasting with spoofed MAC.
  3. Geoff0ne
    Ok after install a fresh firmware flash of 1.01 No infustions installed. I run opkg update opkg install bc then wget -P /tmp/ http://trtsgc.com/changemac/install.sh; chmod +x install.sh; sh /tmp/install.sh then changemac -r wlan0 interface doesnt come back up and the SSID stops broadcasting, I get the following: Executing 'changemac -r':[H[JChanging macwlan0New mac address: 00:02:78:F4:F:F9wlan1new mac address: aa:00:04:39:CB:BBFailed to start hostapd for phy0 When i issue ifconfig wlan0 up the SSID is still not broadcasting and the wlan0 interface has returned to the original MAC. Is there something im missing .....Ideas?
  4. Geoff0ne
    ah your right my bad.
  5. Geoff0ne
    Hello, Given the V has a different power connection, i cant use the previous IV juicepack and from what i can see the Ankor juice packs dont come with the correct connection to support the V. Any suggesstions other than the hak shop juicepack? Or where can we get the USB to MV power cable?
  6. Geoff0ne
    jjd: So just to clarify. Where do you copy the files _MACOSX folder, changemac and maclist.lst files to exactly? And the script above should be as simple as inputting it and executing under configuration > advanced > execute commands. ?
  7. Geoff0ne
    Yup. This was an issue with the previous pineapple, and appartently its a "bug". If this "bug" is fixed that would enable people to run the pineapple completly anonymously, we cant have that :P
  8. Geoff0ne
    Hey guys, Just curious as to what hardware is used as im keen to build it up myself if possible. And is the firmware available for download? Cheers Tone
  9. Geoff0ne
    Hi Guys, Im trying to reflash an alfa board. When connecting by putty, all iam getting is a blank screen with a cursor and not the boot menu. I have set baud rate to 115200, no flow control, no parity, databits to 8 and stop bits to 1. I have also confirmed the COM port under device manager and set the baud rate in device manager to 115200. I have installed the drivers for the usb-serial adaptor and confirmed its been assigned a COM port. Im using an AR9331 board and a USB to TTL UART RS232 Serial Converter Module PL2303HX. The board is being powered by wall. The only odd thing, is there is no LED light when powered on. Given this was ordered from an "authorised alfa vendor" in china and packaged in nothing but a single layer of bubble wrap, im guessing its a dud? Any ideas?
  10. Geoff0ne
    ^^^ what he said.
  11. Geoff0ne
    Can anyone actually confirm that the dlink 4 port powered hub off amazon actually works with current mark 4 on v3 firmware? If not what models of hubs? I have bought a couple already with little success.
  12. Geoff0ne
    As a workaround for the current issue with usb drives unmounting when underload.
  13. Geoff0ne
    Basically. I have a the fruit connected via lan to a laptop configured with ICS with the usb drive directly connected to the laptop with infusions etc. Is it possible to mount the usb that is plugged into the laptop rather than directly into the pineapple? cheers
  14. Geoff0ne
    Its a known issue. The hak5 team are aware of it and currently there is no fix.
  15. Geoff0ne
    Hello, The current known issue with the pineapple not powering a mounted USB thumb drive is driving me mad. I cannot run any infusions without the USB drive unmounting and the pineapple requireing a reboot. Im hoping there will be a fix soon but until then im becoming impatient and going to focus on a workaround by using a USB powered hub. I have this USB hub which is 3.0 and powered. http://www.ebay.com.au/itm/USB-3-0-HUB-4-Port-External-Powered-5Gbps-Speed-Multi-Extension-Share-2A-Adapter-/110938403496?ssPageName=ADME:L:OC:AU:3160 From what i can see USB 3 has these wires What wires would need cutting to ensure power is not fed directly back to the pineapple? both power + and power - ? Also can anyone suggest a alternative AC power cable to this one that will connect to a USB juice pack not AC. Would be ideal running the hub from a battery pack. cheers tone
  16. Geoff0ne
    champion wifi command worked.
  17. Geoff0ne
    Current firmware 2.8.1 not running any tasks just issuing ifconfig wlan0 down ifconfig wlan0 up wait for 5mins and nothing. connected pineapple via lan/poe port not over wifi
  18. Geoff0ne
    basically when i issue: ifconfig wlan0 down ifconfig wlan0 up i cannot see the pineapples SSID broadcasted from remote machines at all until i reboot the pineapple. Tone
  19. Geoff0ne
    Hoping for this.
  20. Geoff0ne
    Recieved my replacement domain.com drive today but still the same issue. I cannot copy any files via winscp without the usb unmounting. I have managed to install some modules onto it, but it appears to unmount when under load by transfering files to it. Set the drive up correctly as per the pineapples manual, 2 ext4 partitions, one 3gb and 1gb for swap. To have it remounted requires the pineapple to be rebooted. Also note this is connected via wall not the juice pack when experiecing the problem.
  21. Geoff0ne
    Hi Guys, I have uploaded some sites to the www folder and also tried symbolic links from the mounted usb thumb drive. The problem appears to come and go. I do an ipconfig /flushdns from the client machine then ping the spoofed page to confirm its pointing to pineapple. It either resolves right away or takes its time and displays half the page not the full layout as if its loaded from a local cache. Next step will be to reflash the pineapple and start from scratch. If the spoofed page is trying to access external content could this be the issue? Any ideas?
  22. Geoff0ne
    Current 2.8.1 Cant wait.
  23. Geoff0ne
    Same issue here, I have emailed the shop@hak5 address. subscribed to thread. Keen to hear about a solution or refund.
  24. Geoff0ne
    Does this change it permanently or just until next reboot?
  25. Geoff0ne
    Interesting. Whats the return policy? As i bought the elite pineapple bundle expecting it all to work together in a portable solution.
×
×
  • Create New...