ZaraByte

Features I figured out in 2.0.0 you're welcome to add your list here as well. SSID Management: This section found under the PineAP What that section is for is for you to setup networks you want to clone? Basically You can use the Reconnaissance to add networks you want to clone simply click on the Infusions link it will drop down the Reconnaissance Reconnaissance you can scan for networks around you their will be a green link if you click on it it should ask you if you wanna add it to the SSID Management list. You can also add your own SSID's if you want. You may need to have Dogma enabled feel free to correct me if im wrong but i believe Dogma makes the SSID names from SSID Management open for broadcasting? So lets say you added hak5 to the SSID Management that SSID will show up as a network around you that the Pineapple redirects to it so if anyone connected to that hak5 SSID name they'd be connecting to the pineapple. Rest of the features im still trying to figure out welcome to share the features you learned or think you understand and correct me of stuff i might be wrong on.

Well i have no ideal whats up with this I re-flashed using http://wiki.openwrt.org/toh/alfa.network/hornet-ub all went well but now i can not login to the MK4 inside /etc/config/network claims the default lan ip is 192.168.1.1 when i try accessing that doesn't work shows its down. I can ping 192.168.1.1 gets replies but unable to login to the router Any idea whats up with that? And my ip4 doesn't have a static ip set i removed that after i flashed.

As You said they are illegal so when you get caught with it enjoy your fine or jail time. Recently some guy was fined if im not mistaken for causing problems with cell phone service as he drove to work.

Uhhhh! Well i bought myself a case that came with a detachable bluetooth keyboard which makes typing better and also keeps me from having to smear up my screen. I personally own a Nokia n900 and dislike it for 2 reasons. The Nokia n900 i bought was not a US model so i had to replace the keyboard on it. I don't like the Nokia n900 cause the keyboard layout is to small for my fat fingers i can press at least 3 buttons with 1 finger :B As i've said i personally like my Nexus 7 2013 model tablet runs KaliPwn and i honestly feel KaliPwn is way better then the Pwnie Community Edition. I've used all 3 out of all of them i prefer the nexus 7 2013 with KaliPwn. I have the Nexus 7 2013 32GB tablet thats what i prefer out of all of them.

This replaces my laptop It's a Nexus 7 2013 running KaliPwn Has all the tools Kali Linux has and also allows me to use Android apps as well. I've added a few the WiFi Adapter since the internal doesn't support raw frame injection as Darren likes to call it. got me a $20 case with a bluetooth De-attachable keyboard. Lets just say with the travel bag that you can get with the MK5 allows the nexus 7 to fit in and be carried ready easy. Alot better then carrying a full sized laptop around!

Should be interesting to see what becomes for getting newer devices to auto connect to a MK5 Wanted to attend defcon this year but didn't really think about saving up for it trying to attend defcon in 2015 thou.

Darren i got a question for you what happens to the firmware on the micro sd after the pineapple is flashed does that firmware remain on the micro sd card or is that firmware deleted off the sd card once the pineapple is flashed. Cause i heard you need to format the sd card to be able to have infusions saved on it otherwise the infusions are installed to the internal storage :B

You're facebook wasn't using the https protocol on the machine that was logging into facebook it was being sent over what appeared to be just www. SSLStrip no longer works against facebook if im not mistaken you can't even go into facebook and remove facebook from using https. The only way people stand a chance at getting logins over facebook these days is if they access facebook by not allowing https to be forced when visiting facebook. I'm sure you're very much aware of that but people are going to be confused when they try and sniff facebook logins why sslstrip never works thus your going to have people asking you why is it not working for them. The reason you were able to get the login is for i assume is..... Because you never accessed facebook on the virtual machine before so when you started sslstrip facebook loads as www. so before https can be forced to be used its blocked. Anyone who has accessed facebook and has facebook saved in their history facebook will always start up as https every session. sslstrip can't strip https if the https is already started you must first stop https from starting because it can block https from loading.

Some im just curious how good the antenna is on them. Any idea how far away it can listen in on aircraft? Gonna be hard doing a video review on it if im need to make a custom pole to run off it. I live not to far from the international airport for my area i'd say about roughly about 15-20 miles from it. I hear planes fly over everyday i guess if worse came to worse i could wait a few months when air traffic really picks up for like Thanksgiving or Christmas if i had to.

I'm sure they are busy i'd know i've got so much stuff i need to be doing but so overwelmed to know where to get started need to finish videos on MK5 other videos i need to work on still need to redo all my old videos i don't have a studio where i can get the videos done in a quite place so i kinda have to wait till i can time a good time to do it.

Well the other way to tell but it requires you to connect to the device is nmap scanning :B You ever ran a nmap scan on the MK5 you will see what im talking about.

Eh i just noticed you guys were talking about wlan0 not being able to increase the TX power i need sleep bad lol.

Screen Shot: The only reason wlan0 is at 18 for me is because you need to turn disabled the interface before you can change the TX Power and then re-enabled the interface wlan1 was disabled thats why my TX Power shows 27 im not sure if the TX power can go beyond 27dbi i've never seen my Alfa Network AWUS036H go over 27 dbi ------ Uhhh not sure i get what some of you are talking about im able to get the TX power up to at least 27 dbi i'll see if i can get a screen shot of it i'll have to power up my pineapple real fast reason i was trying the TX power was as i said in another topic the signal i thought was kinda low for the pineapple with the antenna's it had which is kinda true if your not in-line with where the pineapple is i might be wrong thou.

Meh my way to detect a Pineapple is when im connected and im able to access :1471

I prefer my nexus 7 2013 tablet only because i doubt Micosoft app store is as good as Google's Market. Should look into getting a Nexus 7 Tablet you might be able to find a decent one used on ebay for under $150 I was talking on another forum about something of this same your speaking of right now kinda Here is my nexus 7 setup. about a month old pictures but nothings changed maybe a few more smears :D

Yeah kinda what i figured but i just thought i'd ask i heard some people are able to track UAV's flying around. I seem to have alot of Helicopters flying around once in a while. Would be nice to know which on they are. Between the... Police Helicopters News Helicopters Mosquito Control EMS Meta-VAC It's hard to tell which one it is fly around. Good to know for future references when i do a video on tracking aircraft just wanted to pull up some information.

Any chance of tracking Helicopters with SDR dongles aircraft is one thing but im not aware of helicopters having a tracker in them.

I'm confused as to what your talking about that attwifi is Open which means it doesn't need a password to connect to that access point all you need to do and click Connect to Network link and it should connect you to it.

How are you connecting to the pineapple? You can try connecting to your pineapple over ethernet and see if you can access that IP

Yeah i was aware of the python script but as i said don't really wanna have to ssh into the pineapple would be nice if we had the Infusion to do it for us. I currently already have wifite installed on the KaliPwn for my Nexus 7

Any chance one of you Infusion makers could make us a WEP Cracking Infusion? I see alot of networks around me still using WEP so would be cool to have that option aswell. I don't really like to have to SSH into the pineapple and run all the commands takes way to long when your using a virtual board on a tablet. Time is everything too when your only going to be in the area for a short time always nice to have a point click!

Tested and works after rebooting the MK5 nice.

Eh im having few problems with the WPS v1.3 My steps: Scan AP's with wlan1 Disabled wlan1 after AP list displays. Turn Monitor Mode on wlan1 Pick network Enable Auto Refresh On Click Start worked the first time now it just does nothing i'll try again later WPS v1.3 is kinda buggy or im doing something wrong :D

Uh!!! well the first picture doesn't look good if thats how it really looks for you cause its not supposed to look like that. https://www.youtube.com/watch?v=xoYm8OGllhE Make sure your following like the video shows if the attwifi doesn't need a password just click connect to network without a password.

Uhhh nm i having the same problem i set it back to what it was.