wookie_666 Posted August 20, 2017 Share Posted August 20, 2017 Just now, oakman said: -> Thanks ill check Quote Link to comment Share on other sites More sharing options...
wookie_666 Posted August 20, 2017 Share Posted August 20, 2017 Actually. after testing, 13 channels on hacked app uninstalled hacked app installed stock app from appstore. Turned everything back on And 13 channels on stock app too. So not sure about that. any other ideas. Quote Link to comment Share on other sites More sharing options...
Sirenity Posted August 20, 2017 Share Posted August 20, 2017 3 hours ago, wookie_666 said: Actually. after testing, 13 channels on hacked app uninstalled hacked app installed stock app from appstore. Turned everything back on And 13 channels on stock app too. So not sure about that. any other ideas. Well in modded mode you can go into signal settings and be able to change the ghz frequency 2.4/5.8. In stock version not. (ios 4.1.5 ac500 rc30) Quote Link to comment Share on other sites More sharing options...
skrow Posted August 20, 2017 Share Posted August 20, 2017 That's very wierd. I had it working for a while using .dji.configs file. I was sure it was working fine for the long run... Today I went... and the FCC enable doesnt work anymore. I didn't upgrade RC nor AC. Didn't update the app. I did get a message about wifi location and because I was stressed I clicked ok... not sure if it's related or not. Now I turn on my spark and I get 13 channels again :( Quote Link to comment Share on other sites More sharing options...
Sirenity Posted August 20, 2017 Share Posted August 20, 2017 Just now, skrow said: That's very wierd. I had it working for a while using .dji.configs file. I was sure it was working fine for the long run... Today I went... and the FCC enable doesnt work anymore. I didn't upgrade RC nor AC. Didn't update the app. I did get a message about wifi location and because I was stressed I clicked ok... not sure if it's related or not. Now I turn on my spark and I get 13 channels again :( It was asking if you want to change back to own region or country and you'd said yes. can you show me how that works with the .dji.configs file i have it but it didnt do anything for me tho. i have it set up w the modded apk first and fly with ios Quote Link to comment Share on other sites More sharing options...
oakman Posted August 20, 2017 Share Posted August 20, 2017 (edited) 5 minutes ago, skrow said: That's very wierd. I had it working for a while using .dji.configs file. I was sure it was working fine for the long run... Today I went... and the FCC enable doesnt work anymore. I didn't upgrade RC nor AC. Didn't update the app. I did get a message about wifi location and because I was stressed I clicked ok... not sure if it's related or not. Now I turn on my spark and I get 13 channels again :( Of course it's related, always click on cancel to stay in FCC mode. It seems the only sure way to get back to FCC is with the hacked 4.1.13 Android. Edited August 20, 2017 by oakman Quote Link to comment Share on other sites More sharing options...
skrow Posted August 20, 2017 Share Posted August 20, 2017 But can't I simply re-install the app? Quote Link to comment Share on other sites More sharing options...
skrow Posted August 20, 2017 Share Posted August 20, 2017 2 minutes ago, Sirenity said: It was asking if you want to change back to own region or country and you'd said yes. can you show me how that works with the .dji.configs file i have it but it didnt do anything for me tho. i have it set up w the modded apk first and fly with ios I followed this: http://dji.retroroms.info/howto/fccios Quote Link to comment Share on other sites More sharing options...
oakman Posted August 20, 2017 Share Posted August 20, 2017 I don't think anyone here's gotten that to work reliably, sometimes it works and sometimes it doesn't, see the previous messages about it. Quote Link to comment Share on other sites More sharing options...
Sirenity Posted August 20, 2017 Share Posted August 20, 2017 8 minutes ago, skrow said: I followed this: http://dji.retroroms.info/howto/fccios Yeah i did 2, but what did it change for you..? Quote Link to comment Share on other sites More sharing options...
skrow Posted August 20, 2017 Share Posted August 20, 2017 Just now, Sirenity said: Yeah i did 2, but what did it change for you..? The range... I didn't realize any other difference than the range. I flew 1200m witout ANY lag. Now I'm back to laggy 400m range :( Quote Link to comment Share on other sites More sharing options...
Sirenity Posted August 20, 2017 Share Posted August 20, 2017 1 minute ago, skrow said: The range... I didn't realize any other difference than the range. I flew 1200m witout ANY lag. Now I'm back to laggy 400m range :( Did you do this with or without otg..? Cus for me i connect otg after app asking me if i want to switch region or country and canceled that. have you started installing 4.1.3 apk to get back..? Quote Link to comment Share on other sites More sharing options...
skrow Posted August 20, 2017 Share Posted August 20, 2017 I don't remember. got lucky I guess. I'm on iOS and I don't have another version of the dji Go app :( Quote Link to comment Share on other sites More sharing options...
Sirenity Posted August 20, 2017 Share Posted August 20, 2017 3 minutes ago, skrow said: I don't remember. got lucky I guess. I'm on iOS and I don't have another version of the dji Go app :( Take ufile.io/6zhbv its a option but u have to find someone with android to install the apk run it and do this: We 1 Quote Link to comment Share on other sites More sharing options...
skrow Posted August 20, 2017 Share Posted August 20, 2017 15 minutes ago, Sirenity said: Take ufile.io/6zhbv its a option but u have to find someone with android to install the apk run it and do this: We YOU ARE AMAZING It works again. I have an Android Tablet with modded apk. I started it again, switched to US and boom. Went back on my iOS device,,, got the message again...CLICK cancel!!!! and now I have only 11 Channels so I'm assuming it will work like a charm. Lesson of the day. Even when you're surrounded by people watching you... take your time, and read all messages :) Thx for the help. Quote Link to comment Share on other sites More sharing options...
Sirenity Posted August 20, 2017 Share Posted August 20, 2017 18 minutes ago, skrow said: YOU ARE AMAZING It works again. I have an Android Tablet with modded apk. I started it again, switched to US and boom. Went back on my iOS device,,, got the message again...CLICK cancel!!!! and now I have only 11 Channels so I'm assuming it will work like a charm. Lesson of the day. Even when you're surrounded by people watching you... take your time, and read all messages :) Thx for the help. Nice, im about to testfly myself.. let me know how it goes 5.8ghz + otg.. your welcome Quote Link to comment Share on other sites More sharing options...
jeff1234 Posted August 21, 2017 Share Posted August 21, 2017 hi everyone anyone know the new firmware .600 disable Forced fcc? Quote Link to comment Share on other sites More sharing options...
wookie_666 Posted August 21, 2017 Share Posted August 21, 2017 5 hours ago, jeff1234 said: hi everyone anyone know the new firmware .600 disable Forced fcc? So seeing as though this up date is now going to be mandatory, otherwise the drone wont fly, can someone please give us an update on the following 1. does the update .600 work with the foced FCC mode? 2. Does the update 300 on remote also work with forced FCC mode? 3. Is there a DJI GO 4 .1.5 modified version on the cards? (i am currently running 4.1.3) 4. Is there a sure fire way to check if you're on CE or FCC (the channel listing showing 11 or 13 doesn't work for me, as mine shows 13 with both the modified app and standard app, it might be because it stayed in FCC from one app to another, even though i turned the spark off and on again between apps) Thanks for all the hard work to all those involved. It really is apreciated. Quote Link to comment Share on other sites More sharing options...
Invernomuto Posted August 21, 2017 Share Posted August 21, 2017 1 hour ago, wookie_666 said: So seeing as though this up date is now going to be mandatory, otherwise the drone wont fly, can someone please give us an update on the following 1. does the update .600 work with the foced FCC mode? 2. Does the update 300 on remote also work with forced FCC mode? 3. Is there a DJI GO 4 .1.5 modified version on the cards? (i am currently running 4.1.3) 4. Is there a sure fire way to check if you're on CE or FCC (the channel listing showing 11 or 13 doesn't work for me, as mine shows 13 with both the modified app and standard app, it might be because it stayed in FCC from one app to another, even though i turned the spark off and on again between apps) Thanks for all the hard work to all those involved. It really is apreciated. 1-yes otg 2-yes otg 3-use android app 4.1.3 for Force FCC and then Use IOS 4.1.5 Iphone Ipad work i see 11 channel in 2.4ghz. Attention Update for RC don't Delete FCC Status :) Quote Link to comment Share on other sites More sharing options...
wookie_666 Posted August 21, 2017 Share Posted August 21, 2017 4 minutes ago, Invernomuto said: 1-yes otg 2-yes otg 3-use android app 4.1.3 for Force FCC and then Use IOS 4.1.5 Iphone Ipad work i see 11 channel in 2.4ghz. Attention Update for RC don't Delete FCC Status :) Thanks for the update. but why does it need to be OTG. Ive been running wifi from the RC to phone for the last week with no issues. I do get a very slightly better signal and less lag with OTG, but I dont want to be limited to OTG only. Can you explain why OTG is the only option for update .600? Also, I dont run an iphone or ipad, so i cant load the app to see, But you're saying that 13 channels in 2.4 is certainly FCC? And you can confirm that we can update the RC with no issues in the FCC forced mode? Quote Link to comment Share on other sites More sharing options...
Invernomuto Posted August 21, 2017 Share Posted August 21, 2017 17 minutes ago, wookie_666 said: Thanks for the update. but why does it need to be OTG. Ive been running wifi from the RC to phone for the last week with no issues. I do get a very slightly better signal and less lag with OTG, but I dont want to be limited to OTG only. Can you explain why OTG is the only option for update .600? Also, I dont run an iphone or ipad, so i cant load the app to see, But you're saying that 13 channels in 2.4 is certainly FCC? And you can confirm that we can update the RC with no issues in the FCC forced mode? fcc mode don't work in wifi mode...or work bad... Quote Link to comment Share on other sites More sharing options...
wookie_666 Posted August 21, 2017 Share Posted August 21, 2017 2 minutes ago, Invernomuto said: fcc mode don't work in wifi mode...or work bad... That's incorrect. I've been using wifi for the last week with forced fcc mode and have gotten over 2km range. I want to know if the latest update 600 breaks anything with forced fcc mode. Quote Link to comment Share on other sites More sharing options...
skrow Posted August 22, 2017 Share Posted August 22, 2017 5 hours ago, wookie_666 said: That's incorrect. I've been using wifi for the last week with forced fcc mode and have gotten over 2km range. I want to know if the latest update 600 breaks anything with forced fcc mode. I'd like to know that as well, but I guess nobody wants to try without knowing. From what I understand invernomuto confirmed that it works already no? Quote Link to comment Share on other sites More sharing options...
wookie_666 Posted August 22, 2017 Share Posted August 22, 2017 I can confirm, latest update .600, and .100 on RC remote, using 4.1.3 on android, works fine. I got longer range using otg at about 2.2kms before complete cutoff, no cutoff before. Quote Link to comment Share on other sites More sharing options...
skrow Posted August 22, 2017 Share Posted August 22, 2017 8 minutes ago, wookie_666 said: I can confirm, latest update .600, and .100 on RC remote, using 4.1.3 on android, works fine. I got longer range using otg at about 2.2kms before complete cutoff, no cutoff before. I'm on iOS. But I also have a modded Android 4.1.3. I guess it should be working as for you. Anyway apparently they will ground the birds that are not updated so we might not have another choice than testing it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.