Slippy Posted August 27, 2017 Share Posted August 27, 2017 On 2017-08-24 at 4:57 AM, Tanos said: Is there any chance modifying the bitrate of the Mavic? I looked and looked and looked some more through the apk and while there are most certainly many references to bitrate, not a single one of them indicated that the bitrate details are part of the apk itself, which suggests to me that it is in the firmware. Quote Link to comment Share on other sites More sharing options...
Bin4ry Posted August 27, 2017 Author Share Posted August 27, 2017 6 hours ago, oakman said: 2.5km is a lot though probably not very useful on a daily basis since you probably have barely enough to get back!I top out at 1.5k which is fine. Don't get the region warning oddly enough, maybe the FCC patch that I never removed works now! Yeah the range is not very useul that's right ? but it's interesting to test though. I get to 2km and back very good on one battery But if there would be strong winds you will get a problem getting home, so I did not have enough courage to fly further away. 21 minutes ago, Slippy said: I looked and looked and looked some more through the apk and while there are most certainly many references to bitrate, not a single one of them indicated that the bitrate details are part of the apk itself, which suggests to me that it is in the firmware. Did not look into this yet. Maybe ask in the slack channel. I think there were some posts regarding this. Best Regards Quote Link to comment Share on other sites More sharing options...
Aladin Posted August 29, 2017 Share Posted August 29, 2017 Hello everybody I'm a French Mavic owner and I would like to share some information with you. Before buying my Mavic, I sent many emails to DJI in order to know whether the CE limitation was soft, hard or both. It was very difficult to get an answer but they finally said answered "both" (I have an email from them). Thus, I decided to buy my Mavic in the US not to have the "hard" limitation when I travel outside Europe. On the back of my remote controller, it is written FCC whereas it is written CE for a drone bought in France. As said I leave in France under CE limitation, and my flying range is about 2.5km at home in a medium dense wifi area and without any modification or hack (DJI GO 4 4.1.5.3 and Mavic firmware .900). One month before, I have been able to fly as far as 3.5km in a US desert area (in sport mode, you can reach this distance, spend 5mn to take pictures or film and come back even with a little wind and land with 15% battery left) Last weak, I discovered this forum and I tried the modified 4.1.3 DJI GO 4 version after having verified I was in "US" mode. I did not see any real range improvement at home. What do you think about it ? Could the range effectively be a combination of soft and hard limitation ? Quote Link to comment Share on other sites More sharing options...
JeeHaa Posted August 29, 2017 Share Posted August 29, 2017 (edited) Just to report that Spark with the latest .600 FW (RC=.400), the FCC patch still works. I use the modded 4.1.3 GO app to set FCC on one Android device and then use my other daily phone with the official 4.1.5 to fly. Without OTG and on 5.8GHz I got to at least 900m without any connection issues. In CE mode the "weak image" warnings start at about 150m. Edited August 29, 2017 by JeeHaa Quote Link to comment Share on other sites More sharing options...
justin1230 Posted August 31, 2017 Share Posted August 31, 2017 Did they fix it in .1000 firmware on Mavic? Quote Link to comment Share on other sites More sharing options...
skrow Posted August 31, 2017 Share Posted August 31, 2017 What about the new 4.1.9 iOS app?FCC still works? Quote Link to comment Share on other sites More sharing options...
Invernomuto Posted September 2, 2017 Share Posted September 2, 2017 2.3km my record 2.4ghz OTG and 2083mt with 5.8ghz without OTG. I use iPhone 6s FCC Mode and DJI GO 4 4.1.7 (last monday) Quote Link to comment Share on other sites More sharing options...
Grievous Posted September 3, 2017 Share Posted September 3, 2017 Hi guys ! Thanks to the information collected on this forum, I'm able to use FCC mode (still working after the last DJI updates) on my SPARK. I use it with pretty good results. One question: did someone here already test the ''FCC boost'' Mode on a SPARK ? Quote Link to comment Share on other sites More sharing options...
Neelix Posted September 4, 2017 Share Posted September 4, 2017 Hi everyone! I'm am a new member here, thank you for the good work so far. I have some questions about the patchapk.exe I run it as administrator. First: When i click file --> apk version--> 4.1.8 ist dosent stay there. if i try it again to check ist still stays on 4.1.3. i cant choose 4.1.8 During Patch i have an issue. It says: Error: Assertion failed: hunk, file ../patch-2.5.9-src/patch.c, line 354 This application has requested the Runtime to terminate it in an unusual way. Please contact the applications support team for more information. I use dji version 4.1.8 from apk mirror and changed the name to orig.apk. at the windows command line it works well, but i cant choose the version ( like 4.1.3 or 4.1.8 ) ca anyone please help me? Quote Link to comment Share on other sites More sharing options...
Bin4ry Posted September 4, 2017 Author Share Posted September 4, 2017 That was my fault. In the bat and sh script the APK version gets selected automatically for the windows app: resynchronize now I fixed the error! Best Regards Quote Link to comment Share on other sites More sharing options...
Neelix Posted September 4, 2017 Share Posted September 4, 2017 Ok, thank you ! The bat Version works fine, i use this for patching. the apk version select works now in the windows version, thanks ! But i still get that error when i try to patch: ...... <-------------- Decompile Complete -----------> <-------------- Begin Patch --------------> Applying Patch: forceFCC Result: patching file smali_classes3/dji/apppublic/reflect/AppPublicReflect.smali Error: Assertion failed: hunk, file ../patch-2.5.9-src/patch.c, line 354 This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. <-------------- Patch Complete -----------> I have no clue why. Quote Link to comment Share on other sites More sharing options...
Bin4ry Posted September 5, 2017 Author Share Posted September 5, 2017 Me neither, the Windows App is not from me, i removed it for now and assigned the issue to the creator. BR Quote Link to comment Share on other sites More sharing options...
oakman Posted September 11, 2017 Share Posted September 11, 2017 Can 4.1.4/5/8 be modded too? There's a bug in the patched 4.1.3 that prevents panorama assembly and that's a tad annoying, thanks! Quote Link to comment Share on other sites More sharing options...
Bin4ry Posted September 15, 2017 Author Share Posted September 15, 2017 On the github repo there are patches for 4.1.8! BR Quote Link to comment Share on other sites More sharing options...
Invernomuto Posted September 18, 2017 Share Posted September 18, 2017 New update 4.1.10 for iOS... i hope dji don't Remove a button “cancel” ;) in restart message for change region Quote Link to comment Share on other sites More sharing options...
skrow Posted September 18, 2017 Share Posted September 18, 2017 Yep... If anyone knows...let us know ^^ Quote Link to comment Share on other sites More sharing options...
skrow Posted September 19, 2017 Share Posted September 19, 2017 Just to confirm, I updated my iOS app to 4.1.10 and my Spark still gives me 11Chan + the message to switch wifi region...I canceled the popup and still got 11Chan. Didn't fly yet but it's 99% sure I'm still in FCC Quote Link to comment Share on other sites More sharing options...
Slippy Posted September 20, 2017 Share Posted September 20, 2017 More good news! Another patch is available for Bin4ry's amazing patcher, this one restores flight path viewing to the app. Special thanks to some Russian dudes! Quote Link to comment Share on other sites More sharing options...
endless0925 Posted September 22, 2017 Share Posted September 22, 2017 Hi guys, After using patch (4.1.9-1025608) for mod_apk , i find i can't download the off-line map in app. Does anyone have related issue ? thanks! Quote Link to comment Share on other sites More sharing options...
endless0925 Posted September 22, 2017 Share Posted September 22, 2017 52 minutes ago, endless0925 said: Hi guys, After using patch (4.1.9-1025608) for mod_apk , i find i can't download the off-line map in app. Does anyone have related issue ? thanks! Very sorry ; Please ignore my question. After re-install mod_apk , i can download off-line map normally. 1 Quote Link to comment Share on other sites More sharing options...
Koncio Posted September 24, 2017 Share Posted September 24, 2017 I just try on W10 and W7 with few DJI versions and recived this error all the time. CMD and GUI tested. Can You help ? -: Signing with testkey... Exception in thread "main" java.lang.NoClassDefFoundError: sun/misc/BASE64Encoder at s.Sign.addDigestsToManifest(Sign.java:108) at s.Sign.sign(Sign.java:454) at s.Sign.main(Sign.java:532) Caused by: java.lang.ClassNotFoundException: sun.misc.BASE64Encoder at java.base/jdk.internal.loader.BuiltinClassLoader.loadClass(Unknown Source) at java.base/jdk.internal.loader.ClassLoaders$AppClassLoader.loadClass(Unknown Source) at java.base/java.lang.ClassLoader.loadClass(Unknown Source) ... 3 more -: Cleaning up... -: Have fun and stay safe Quote Link to comment Share on other sites More sharing options...
Slippy Posted September 24, 2017 Share Posted September 24, 2017 On 2017-08-29 at 12:28 AM, Aladin said: What do you think about it ? Could the range effectively be a combination of soft and hard limitation ? Possibly. 0700 is a popular firmware if you were wanting to experiment. 32 minutes ago, Koncio said: I just try on W10 and W7 with few DJI versions and recived this error all the time. CMD and GUI tested. Can You help ? Now that is a new one! Knowing Bin4ry he'll probably have an explanation at some point, but I recently patched 418 and it didn't do that. Quote Link to comment Share on other sites More sharing options...
The Editor Posted September 24, 2017 Share Posted September 24, 2017 1 hour ago, Koncio said: I just try on W10 and W7 with few DJI versions and recived this error all the time. CMD and GUI tested. Can You help ? -: Signing with testkey... Exception in thread "main" java.lang.NoClassDefFoundError: sun/misc/BASE64Encoder at s.Sign.addDigestsToManifest(Sign.java:108) at s.Sign.sign(Sign.java:454) at s.Sign.main(Sign.java:532) Caused by: java.lang.ClassNotFoundException: sun.misc.BASE64Encoder at java.base/jdk.internal.loader.BuiltinClassLoader.loadClass(Unknown Source) at java.base/jdk.internal.loader.ClassLoaders$AppClassLoader.loadClass(Unknown Source) at java.base/java.lang.ClassLoader.loadClass(Unknown Source) ... 3 more -: Cleaning up... -: Have fun and stay safe Yup - same here. Quote Link to comment Share on other sites More sharing options...
Koncio Posted September 24, 2017 Share Posted September 24, 2017 30 minutes ago, The Editor said: Yup - same here. Unistall JDK 9 and all about Java THEN install older version http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html this time apk sing ok, and i going to install and test fly ;) 1 Quote Link to comment Share on other sites More sharing options...
The Editor Posted September 24, 2017 Share Posted September 24, 2017 Yes - thank you!!!!!!! problem solved. :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.