Jump to content

bakedmuffinman

Active Members
  • Posts

    21
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by bakedmuffinman

  1. is anyone else having connection issues when trying to setup an internet connection ? Please keep in mind I have been using Pineapples since markiv. first I tried wireless client mode (which has no other option then to use wlan2 ? is it meant to be this way? if so why is there a select interface drop down?). scanned for SSIDs. selected my SSID. put in password (if I put in the wrong password the connect bar has a circling animation that just appears to circle forever. and I can no longer scan for SSIDs until I reboot.). then it looks as if it connects (green checkmark). I click save config. switch to another page. and switch back and it is no longer connected. and I would be lucky if it decides that it can scan again or not. Trying ICS through windows. which is normaly my preferred way with the other Pineapples. I go through the usual steps. (which normally would include at the end changing my internal LAN IP to 172.16.42.42.) before testing the network. and I still cannot get out. I check the routing table. and it has changed to 192.168.137.1 which is the IP address windows would like to use for my internal adapter when I first initialize ICS. I do not see a GUI option to change my routes ? this was removed ?
  2. I fixed my issue with the SD card not mounting properly by following @Havenbreaker post on this thread and rewriting the fstab file.
  3. if you are getting this with "fdisk -l" then putty into your nano and go to root dir. normally you have to "cd .." once. do "mkdir sdcard". then " mount -t ext4 /dev/sda2 /sdcard". After that log back into the web interface and see if it is correctly identifying your sdcard. I am having the same issue. but my sdcard is hanging when I try to install any modules to the sdcard.
  4. wondering what im doing wrong. I had evil portals running previously with evil portal templates working. Now after a clean reload of FW 2.4.2 and evil portal module 3.1 when ever I load a captive portal none of the images load. the index.php appears to be showing the correct path src="assets/img/dtnk16mcjo.png"> the image files are there. both installed on SD card. none of the supplied portals are loading images.
  5. wondering what im doing wrong. I had evil portals running previously with evil portal templates working. Now after a clean reload of FW 2.4.2 and evil portal module 3.1 when ever I load a captive portal none of the images load. the index.php appears to be showing the correct path src="assets/img/dtnk16mcjo.png"> the image files are there. both installed on SD card. none of the supplied portals are loading images.
  6. I upgraded from 2.0.2 to 2.4.2. Since then I have tried downgrading back to 2.0.2 to 2.1.X etc etc. with no luck.
  7. @PoSHMagiC0de if this was in response to my post. im using several devices. one of them is android 5. that being said. all of my devices were literally connecting before I upgraded fw to 2.4.2
  8. @Foxtrot it appears multiple people are all having this issue with PineAP. Ive encountered people across multiple forums. all describing the same issue where clients are not associating with PineAP after 2.4.2 FW upgrade. Ive given you my debug log. are you still looking into it? or?
  9. I am having the same issue. which only just started once upgrading to 2.4.2. I was on 2.0.2 before and everything was working perfectly. but now even downgrading to any other FW does not fix it. I hope they come out with a fix soon.
  10. I would be careful about updating at the moment. Multiple people are reporting problems on the latest FW.
  11. what I mean is that previously before the 2.4.2 patch I was on 2.0.2. I would plug my Nano into power. it would boot up and start PineAP automatically with allow associations. Phones, laptops, computers would automatically start connecting under which ever SSID they were searching for. since the 2.4.2 nothing automatically connects. ive only been able to manually connect a device to the set PineAP SSID. and even then it acts buggy. like it will connect then disconnect. I have to reconnect 3x before stably connecting. @Foxtrot
  12. got debug working. I believe im having the same issue. PineAP is not associating with client. PineineAP Daemon: shows as enabled on auto start. CPU is nearly always showing 100% from the dashboard. but not from Status module downloaded from wifipineapple.com after I upgraded FW from 2.0.2 to 2.4.2 Literally right before I upgraded I had clients auto associating to the pineapple. debug(1).log
  13. I get an error when generating "SyntaxError: JSON.parse: unexpected character at line 1 column 1 of the JSON data"
  14. Pretty disappointed. my Nano was working fine before this update. now I cant get pineap working at all. no clients ever connect. I believe I was on 2.02 before I updated today. Ive tried factory reset tried reverting to FW 2.02. ics working. filters are in deny mode. not sure where else to look for support.
  15. Another with the same issue here. came here looking for a resolution.
  16. @PoSHMagiC0de Thanks for your help. I believe I got it working. I cant seem to crack the hashes yet even with the actual password from the pulled hashes when I got quickcreds to work but thats another issue. I ended up getting the payloads working. I think the green flashing light issue I was having was due to the out of date firmware. so I did the 1. factory reset from hidden partition. by pulling out BB just after boot light turns off. 2. updating firmware to newest firmware. 3. installed tools. (which was a whole other adventure in itself to get to work correctly) 4. payloads working! Im still having issues with I think the drivers installing? the BB fails payload until 2 or 3 sometimes even 4 re-inserts. but these issues probably belong on the QC post.
  17. @PoSHMagiC0de ive just recently gotten my BB and have yet to get any payload to work. it just flashes green constantly. ive changed the payload to only change the color of the LED and nothing. still just flashing green. but I suppose I should get the payloads working before tackling the RNDIS driver error. the hid, storage and serial are working fine. ive tried all the steps above posted by Draxiom. and did a facotry reset just before that. not sure what else to try from here? I feel like I must be missing some thing simple.
  18. @moumoutaru if you have to manually install the drivers how is the attack supposed to work?
  19. @Draxiom I tried everything you suggested besides running bb.sh. as im in windows. it still just flashes green on all payloads. any help?
  20. I downloaded all infusions onto my machine locally from link @Kerravon provided. Im on windows machine. downloaded links. unzipped. used winSCP to SCP into Pineapple. referenced linked forum said to move files too mv /tmp/infusions/$name /pineapple/components/infusions/ directory does not exist in pineapple. so I tried copying to "/pineapple/infusions/" where it appears other infusions are located. but they do not appear in pineapple bar? I created the directory and tried to copy too "/pineapple/components/infusions/" but they do not appear in pineapple bar? I have other Infusions installed on USB so I tried copying infusions too "/usb/infusions/" no matter where I copy they never show up in pineapple bar? tried reboots inbetween. so how do you manually install infusions?
×
×
  • Create New...