Search the Community
Showing results for tags 'fails'.
Found 2 results
I received my replacement bashbunny yesterday and this new one will not perform the firmware update. Here is what I have tried so far: I have the sha checksum verified 1.4 firmware update file on the root of the storage partition and have plugged it into 2 different PCs (one linux and one windows); but it just mounts the storage and boots into arming mode normally. It totally skips the firmware update. I tried the f/w update on a third PC (windows) and it failed to start as well. I even tried the unbricking reset steps provided by Seb. The unbricking reset will not even start. I get no "police" flashing at all. Whenever the bunny is plugged in all it does is mount the storage partition. No reset or firmware update procedures ever begin. I tried to flash the 1.3 firmware as well to make sure it wasn't an issue with the firmware file itself. It just boots normally into arming mode completely bypassing the expected firmware update as it does with the 1.4 version. I also tried running the bunnyupdater version 1.0 and the newer 1.1; no change :(
My bashbunny does not show a device in Win7 and the devmgr shows under "other devices" a "RNDIS" entry with the yellow exclamation symbol indicating driver failure. Trying to point it to the bunny as suggested for the similar problem for CDC Serial driver issues does not help. I followed the steps here as far as i could: http://wiki.bashbunny.com/?_escaped_fragment_=././index.md%23Sharing_an_Internet_Connection_with_the_Bash_Bunny_from_Windows#!././index.md%23Sharing_an_Internet_Connection_with_the_Bash_Bunny_from_Windows I've not had any success installing tools, connecting to internet, or anything else so far. It's been a pretty big let down for a first day. Any guidance is appreciated!