reaper_666
Active Members-
Posts
22 -
Joined
-
Last visited
Everything posted by reaper_666
-
I restarted the Pineapple again and then it worked!
-
But i cant reach the Pineapple via browser on 172.16.42.1:1471 I set my IP from my LAN adapter to : 172.16.42.42 Subnet: 255.255.255.0 And DNS 8.8.8.8 It worked before
-
Thats right my green LED is on permanently, red, blue and yellow are blinking like the light from kit in knight rider
-
Go and buy any powrbank above 8000mAh andyour Pineapple will run up to 24 hours.... But the configuration is critical. I have a Xlayer 10000mAh powerbank with a digit indicator. It takes about 10 hours to charge it. But i think that the Xlayer products only availabe in germany
-
Hello, i tried a OTA update from Pineapple menu. After 2 hours i tried to login the pineapple but the browser says "no response" Then I tried to power off the Pineapple an start it again. Now there is a softbrick. I tried to unbrick the Pineapple with this tutorial https://www.wifipineapple.com/?flashing. After flashing the factory image i tried to restart the Pineapple but it don't work. It seems that the SD card is corrupted too. I formated the SD card with fat32 but it isn't the right format for the Pineapple. What can id do?
-
Helo is there a way to start sslstrip automatic with the DIP switches?
-
Oh nice! Thank you for explaining. Is it possible to update Aircrack?
-
Thank you overwraith but how to install aircrack on the pineapple? Or is it pre-installed? Using it with ssl? The way to use aircrack i know ;)
-
Helo, i searched the user infusion for the pineapple on my pineapple but i didn't found aircrack. How can i use aircrack on the pineapple?
-
Helo, i activated karma and SSL strip but ssl strip does not show me any data. It shows only sslstrip output_1414865630.log [November 01 2014 15:13:57]. Must i enable PineAP, too? When i try to login with my mobile phone to amazon, facebook or so on, there is nothing show in the sslstrip output. Can anyone explain me why?
-
I formatted the sd card in the pineapple and then i made a factory reset. Now all is fine! Thak you for helping
-
I don't know its corruptet or not. i bought the pineapple 2.nd hand. Best thing i reset my pineapple..... is that possible? Will the pineapple accept the new card? I formatted the new card once with the pineapple. When i also reset the pineapple can the pineapple use the new card?
-
With Linux copy/past from one to the other cord it doesn't work. When i put the card in my cardreader or usb adapter i get following error. Error mounting /dev/mmcblk0p2 at /media/reaper/F81D-34DA: Command-line `mount -t "vfat" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush" "/dev/mmcblk0p2" "/media/reaper/F81D-34DA"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/mmcblk0p2, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so later i will try the solution from fringes
-
Tank you for your answers!
-
OK thx. No problem i have a linux PC. But there is no option to format the disk with the Pineapple. How can i do this? With ssh? And what command?
-
Hi duudes, I want to use a bigger sd card to my MKV. I found this thread but the links are down https://forums.hak5.org/index.php?/topic/30511-missing-manual-or-firmware-card-from-saturday-launch-event/ Is it possible easy to copy the content from the 2GB sd card with the firmware for MKV to an 8GB sd card?
-
Got PineAP(not pineapple) questions? Let me answer them!
reaper_666 replied to Sebkinne's topic in WiFi Pineapple Mark V
Helo, i read PineAP in my Wifi Pineapple but i can't explain me what this application does. Is the activation needed for Karma or SSLstrip? Where can i get more informations? -
How to configure Huawei E173 mobile USB modem?
reaper_666 replied to reaper_666's topic in WiFi Pineapple Mark V
Thank you very much Mr.miYagi that was the problem the PIN was active! Now all works fine and without any problems -
Helo, i followed the little booklet delivered with the Pineapple. The connection setup won't work for me. I have 2 LAN card in my PC. The one LAN card for getting internet and the second to share internet. I use Windows 7 for the settings. I can access the Pineapple with LAN card 2 but the pineapple do not have a connection to the internet. I checked the box "Allow other network users to control or disable the share internet connection" in the proberties of the LAN1 card.
-
How to configure Huawei E173 mobile USB modem?
reaper_666 replied to reaper_666's topic in WiFi Pineapple Mark V
I selected Protocol: 3g Service: umts Apn: pinternet.interkom.de User: fonic Pass: fonic this should be the right preferences for the o2 germany fonic internet. But it does not work. -
How to configure Huawei E173 mobile USB modem?
reaper_666 replied to reaper_666's topic in WiFi Pineapple Mark V
sorry correct picture url is http://www.pic-upload.de/view-25004325/Bildschirmfoto-vom-2014-10-21-16-40-39.png.html -
Helo girls and guys, i want to configure my Huawei E173 USB modem to access the internet with Pineapple. How can i do that? If i ty the root@pineapple:~# lsusb the pineapple answeres BUS 001 Device 005: ID 12d1:1446 Huawei Technologies Co., Ltd. E1552/E1800/E173 (HSPA Modem) What can i do to access internet via this huawei stick? Is the USB path correct? Here a picture