juanb007 Posted September 13, 2018 Posted September 13, 2018 Hi guys !! Im setting up first time my Nano inside kali which I installed (kali) on vmware. so i downloaded the wp6.sh script and did step by step as shown in this youtube video so set it up https://www.youtube.com/watch?v=CRwO8rpHXBM i am able to get to the web interface but is can show the bulletins nor can show me all the modules which i can download so it seems my nano cant get to the internet. i attched a screenshot of my netwrok config. please help I tried many things but nothing is working. (btw on the kali machine i do have internet.) thanks a lot !! juan
kleo Posted September 13, 2018 Posted September 13, 2018 Have you tried running wp6.sh? Rerun [G]uided setup over again.
juanb007 Posted September 13, 2018 Author Posted September 13, 2018 yes i did . i even restarted the whole computer to try to see if it will work. it didnt. thanks a lot!
Rkiver Posted September 13, 2018 Posted September 13, 2018 https://forums.hak5.org/topic/28600-do-not-post-wifi-pineapple-related-questions-here/
juanb007 Posted September 13, 2018 Author Posted September 13, 2018 hi foxtrot to where you moved it? still no one is helping... thanks juan
wanda45 Posted September 14, 2018 Posted September 14, 2018 My problem is I can't get my wifi pineapple to show up in Kali. I just ordered a kali friendly wifi adapter, I don't know if that will solve my problem because I cant seem to find drivers for the internal Atheros adapter. The wp6.sh script will not run also. just dots....... Anyone any ideas pls Some relevant info Windows 7 Professional Processor Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s) System Type x64-based PC Running VirtualBox guest Version 5.2.18 r124319 (Qt5.6.2) Debian 64bit 4.17.17-1kali1 (2018-08-21) System card: Qualcomm Atheros AR5BWB222 (Bridget set in VB) I been searching for a solution for weeks and can't figure it out. Tried researching the maze and downloading the new backports but I don't even know if that's the answer and doubt I did it correctly anyhow. root@kali:~# lspci -nnk | grep -i net -A2 00:03.0 Ethernet controller [0200]: Advanced Micro Devices, Inc. [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: Advanced Micro Devices, Inc. [AMD] PCnet - Fast 79C971 [1022:2000] Kernel driver in use: pcnet32 Kernel modules: pcnet32 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] root@kali:~# lsmod Module Size Used by ath9k 118784 0 ath9k_common 20480 1 ath9k ath9k_hw 487424 2 ath9k_common,ath9k ath 32768 3 ath9k_common,ath9k,ath9k_hw mac80211 827392 1 ath9k cfg80211 774144 4 ath9k_common,ath9k,ath,mac80211 rfkill 28672 2 cfg80211 fuse 118784 3 vboxvideo 45056 3 ttm 131072 1 vboxvideo drm_kms_helper 192512 1 vboxvideo drm 462848 6 drm_kms_helper,vboxvideo,ttm joydev 24576 0 snd_intel8x0 45056 4 snd_ac97_codec 143360 1 snd_intel8x0 evdev 28672 17 crct10dif_pclmul 16384 0 crc32_pclmul 16384 0 serio_raw 16384 0 ghash_clmulni_intel 16384 0 ac97_bus 16384 1 snd_ac97_codec pcspkr 16384 0 snd_pcm 118784 2 snd_intel8x0,snd_ac97_codec sg 36864 0 snd_timer 36864 1 snd_pcm snd 94208 12 snd_intel8x0,snd_timer,snd_ac97_codec,snd_pcm soundcore 16384 1 snd intel_rapl_perf 16384 0 vboxguest 45056 4 button 16384 0 video 45056 0 battery 24576 0 ac 16384 0 binfmt_misc 20480 1 ip_tables 28672 0 x_tables 45056 1 ip_tables autofs4 49152 2 ext4 741376 1 crc16 16384 1 ext4 mbcache 16384 1 ext4 jbd2 118784 1 ext4 crc32c_generic 16384 0 fscrypto 32768 1 ext4 ecb 16384 0 hid_generic 16384 0 usbhid 57344 0 hid 135168 2 usbhid,hid_generic sr_mod 28672 0 cdrom 69632 1 sr_mod sd_mod 53248 3 ata_generic 16384 0 crc32c_intel 24576 2 aesni_intel 200704 0 aes_x86_64 20480 1 aesni_intel crypto_simd 16384 1 aesni_intel cryptd 28672 3 crypto_simd,ghash_clmulni_intel,aesni_intel glue_helper 16384 1 aesni_intel ata_piix 36864 0 ahci 40960 2 libahci 40960 1 ahci psmouse 167936 0 ohci_pci 16384 0 ehci_pci 16384 0 ohci_hcd 61440 1 ohci_pci i2c_piix4 24576 0 ehci_hcd 94208 1 ehci_pci libata 278528 4 ata_piix,libahci,ahci,ata_generic pcnet32 49152 0 mii 16384 1 pcnet32 scsi_mod 253952 4 sd_mod,libata,sg,sr_mod usbcore 290816 5 ohci_hcd,ehci_pci,usbhid,ehci_hcd,ohci_pci usb_common 16384 1 usbcore root@kali:~# iwconfig eth0 no wireless extensions. lo no wireless extensions. root@kali:~# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.0.59 netmask 255.255.255.0 broadcast 10.0.0.255 inet6 fe80::7e61:8293:1afb:3084 prefixlen 64 scopeid 0x20<link> inet6 2601:2c1:8700:4c7a::566e prefixlen 128 scopeid 0x0<global> inet6 2601:2c1:8700:4c7a:2f8e:d15d:26d9:d5c2 prefixlen 64 scopeid 0x0<global> ether 08:00:27:d5:04:3b txqueuelen 1000 (Ethernet) RX packets 24 bytes 3911 (3.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 69 bytes 8055 (7.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 base 0xd020 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 16 bytes 960 (960.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16 bytes 960 (960.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 screenshot pineapple settings https://screenshots.firefox.com/aQEc59WpYtSCm3vQ/172.16.42.1
wanda45 Posted September 14, 2018 Posted September 14, 2018 2 minutes ago, wanda45 said: My problem is I can't get my wifi pineapple to show up in Kali. I just ordered a kali friendly wifi adapter, I don't know if that will solve my problem because I cant seem to find drivers for the internal Atheros adapter. The wp6.sh script will not run also. just dots....... Anyone any ideas pls Some relevant info Windows 7 Professional Processor Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s) System Type x64-based PC Running VirtualBox guest Version 5.2.18 r124319 (Qt5.6.2) Debian 64bit 4.17.17-1kali1 (2018-08-21) System card: Qualcomm Atheros AR5BWB222 (Bridget set in VB) I been searching for a solution for weeks and can't figure it out. Tried researching the maze and downloading the new backports but I don't even know if that's the answer and doubt I did it correctly anyhow. root@kali:~# lspci -nnk | grep -i net -A2 00:03.0 Ethernet controller [0200]: Advanced Micro Devices, Inc. [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: Advanced Micro Devices, Inc. [AMD] PCnet - Fast 79C971 [1022:2000] Kernel driver in use: pcnet32 Kernel modules: pcnet32 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] root@kali:~# lsmod Module Size Used by ath9k 118784 0 ath9k_common 20480 1 ath9k ath9k_hw 487424 2 ath9k_common,ath9k ath 32768 3 ath9k_common,ath9k,ath9k_hw mac80211 827392 1 ath9k cfg80211 774144 4 ath9k_common,ath9k,ath,mac80211 rfkill 28672 2 cfg80211 fuse 118784 3 vboxvideo 45056 3 ttm 131072 1 vboxvideo drm_kms_helper 192512 1 vboxvideo drm 462848 6 drm_kms_helper,vboxvideo,ttm joydev 24576 0 snd_intel8x0 45056 4 snd_ac97_codec 143360 1 snd_intel8x0 evdev 28672 17 crct10dif_pclmul 16384 0 crc32_pclmul 16384 0 serio_raw 16384 0 ghash_clmulni_intel 16384 0 ac97_bus 16384 1 snd_ac97_codec pcspkr 16384 0 snd_pcm 118784 2 snd_intel8x0,snd_ac97_codec sg 36864 0 snd_timer 36864 1 snd_pcm snd 94208 12 snd_intel8x0,snd_timer,snd_ac97_codec,snd_pcm soundcore 16384 1 snd intel_rapl_perf 16384 0 vboxguest 45056 4 button 16384 0 video 45056 0 battery 24576 0 ac 16384 0 binfmt_misc 20480 1 ip_tables 28672 0 x_tables 45056 1 ip_tables autofs4 49152 2 ext4 741376 1 crc16 16384 1 ext4 mbcache 16384 1 ext4 jbd2 118784 1 ext4 crc32c_generic 16384 0 fscrypto 32768 1 ext4 ecb 16384 0 hid_generic 16384 0 usbhid 57344 0 hid 135168 2 usbhid,hid_generic sr_mod 28672 0 cdrom 69632 1 sr_mod sd_mod 53248 3 ata_generic 16384 0 crc32c_intel 24576 2 aesni_intel 200704 0 aes_x86_64 20480 1 aesni_intel crypto_simd 16384 1 aesni_intel cryptd 28672 3 crypto_simd,ghash_clmulni_intel,aesni_intel glue_helper 16384 1 aesni_intel ata_piix 36864 0 ahci 40960 2 libahci 40960 1 ahci psmouse 167936 0 ohci_pci 16384 0 ehci_pci 16384 0 ohci_hcd 61440 1 ohci_pci i2c_piix4 24576 0 ehci_hcd 94208 1 ehci_pci libata 278528 4 ata_piix,libahci,ahci,ata_generic pcnet32 49152 0 mii 16384 1 pcnet32 scsi_mod 253952 4 sd_mod,libata,sg,sr_mod usbcore 290816 5 ohci_hcd,ehci_pci,usbhid,ehci_hcd,ohci_pci usb_common 16384 1 usbcore root@kali:~# iwconfig eth0 no wireless extensions. lo no wireless extensions. root@kali:~# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.0.59 netmask 255.255.255.0 broadcast 10.0.0.255 inet6 fe80::7e61:8293:1afb:3084 prefixlen 64 scopeid 0x20<link> inet6 2601:2c1:8700:4c7a::566e prefixlen 128 scopeid 0x0<global> inet6 2601:2c1:8700:4c7a:2f8e:d15d:26d9:d5c2 prefixlen 64 scopeid 0x0<global> ether 08:00:27:d5:04:3b txqueuelen 1000 (Ethernet) RX packets 24 bytes 3911 (3.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 69 bytes 8055 (7.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 base 0xd020 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 16 bytes 960 (960.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16 bytes 960 (960.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 screenshot pineapple settings https://screenshots.firefox.com/aQEc59WpYtSCm3vQ/172.16.42.1 https://screenshots.firefox.com/LSYmAgu9U6P6Babo/172.16.42.1
Just_a_User Posted September 14, 2018 Posted September 14, 2018 If i get time later I will DL kali and take some screenshots on how to do manually.
juanb007 Posted September 18, 2018 Author Posted September 18, 2018 On 9/12/2018 at 7:11 PM, juanb007 said: Hi guys !! Im setting up first time my Nano inside kali which I installed (kali) on vmware. so i downloaded the wp6.sh script and did step by step as shown in this youtube video so set it up https://www.youtube.com/watch?v=CRwO8rpHXBM i am able to get to the web interface but is can show the bulletins nor can show me all the modules which i can download so it seems my nano cant get to the internet. i attched a screenshot of my netwrok config. please help I tried many things but nothing is working. (btw on the kali machine i do have internet.) thanks a lot !! juan Hi I was able to narrow down the problem . u noticed that before i run the script i have internet and then after running the script i dont have internet. its seems the script is messing up my internet connection... in ruining kali from within vmware.
Bigbiz Posted September 22, 2018 Posted September 22, 2018 On 9/12/2018 at 5:11 PM, juanb007 said: Hi guys !! Im setting up first time my Nano inside kali which I installed (kali) on vmware. so i downloaded the wp6.sh script and did step by step as shown in this youtube video so set it up https://www.youtube.com/watch?v=CRwO8rpHXBM i am able to get to the web interface but is can show the bulletins nor can show me all the modules which i can download so it seems my nano cant get to the internet. i attched a screenshot of my netwrok config. please help I tried many things but nothing is working. (btw on the kali machine i do have internet.) thanks a lot !! juan Your problem may be your virtual box set up. Make sure you set it up correctly. Or install the kali linux vbox from the kali site!!!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.