spyfly Posted January 19, 2018 Share Posted January 19, 2018 (edited) Hey. I'm having some trouble kicking clients off a certain access point. Everything seems to be working fine, until i launch the aireplay-ng deauth attack, I have double checked the MAC addresses, of both the AP and client. I tried changing the channel manually when I set up airmon-ng wlan0 'channel' to match the AP but it doesn't seem to help. Commands i use: Sudo ifconfig wlan0 down sudo airmon-ng start wlan0 sudo airodump-ng mon0 sudo aireplay -0 0 -a 'MAC of access point' -c 'MAC of client' mon0 It replies: "Waiting for beacon frame (BSSID: "...") on channel 9 "No such BSSID available" I have tried putting in the ESSID insted with -e "ESSID of access point", but it returns the same. There's a link for screenshots here: https://imgur.com/a/Q7c8t Any suggestions ? Edited January 19, 2018 by spyfly Quote Link to comment Share on other sites More sharing options...
i8igmac Posted January 19, 2018 Share Posted January 19, 2018 try mdk3. It should do the trick. By the way. Change this part. -0 0 -0 10 Send ten packets instead of zero. Quote Link to comment Share on other sites More sharing options...
spyfly Posted January 19, 2018 Author Share Posted January 19, 2018 Thanks I'll try mdk3, I just don't understand why this one isn't working. I heard that the '0' was endless packages, thats why I put that. I tried with 1 with the same result, but I'll test it with 10. Quote Link to comment Share on other sites More sharing options...
PoSHMagiC0de Posted January 19, 2018 Share Posted January 19, 2018 You are trying to deauth while channel hopping. No workie. Your command for airodump-ng is not locking onto a particular AP nor is it locking onto a channel. If you want to deauth without airodump-ng running you will need to manually change your channel. sudo iwconfig mon0 channel <channel of ap> After that it should find it. If you are using airodump-ng then put in the bssid of the AP so it can lock onto it or even add the "-c" option and the channel number to lock it to a channel the AP is on and then it will find it. aireplay-ng does not have the ability to change its channel. It uses whatever channel the interface is currently on. Quote Link to comment Share on other sites More sharing options...
spyfly Posted January 19, 2018 Author Share Posted January 19, 2018 Thank you! I had tried to change the channel, as I had an idea it had something to do with this, but apparently i changed it the wrong way. Much appriciated. Quote Link to comment Share on other sites More sharing options...
MikhailSimon Posted December 20, 2021 Share Posted December 20, 2021 On 1/20/2018 at 2:00 AM, PoSHMagiC0de said: You are trying to deauth while channel hopping. No workie. Your command for airodump-ng is not locking onto a particular AP nor is it locking onto a channel. If you want to deauth without airodump-ng running you will need to manually change your channel. sudo iwconfig mon0 channel <channel of ap> After that it should find it. If you are using airodump-ng then put in the bssid of the AP so it can lock onto it or even add the "-c" option and the channel number to lock it to a channel the AP is on and then it will find it. aireplay-ng does not have the ability to change its channel. It uses whatever channel the interface is currently on. Now i can't use aireplay since now the channel and AP number is conflict now...i spent 3 hours how to fix it..but I don't find any solution Quote Link to comment Share on other sites More sharing options...
MikhailSimon Posted December 20, 2021 Share Posted December 20, 2021 On 1/20/2018 at 2:00 AM, PoSHMagiC0de said: You are trying to deauth while channel hopping. No workie. Your command for airodump-ng is not locking onto a particular AP nor is it locking onto a channel. If you want to deauth without airodump-ng running you will need to manually change your channel. sudo iwconfig mon0 channel <channel of ap> After that it should find it. If you are using airodump-ng then put in the bssid of the AP so it can lock onto it or even add the "-c" option and the channel number to lock it to a channel the AP is on and then it will find it. aireplay-ng does not have the ability to change its channel. It uses whatever channel the interface is currently on. On 1/20/2018 at 2:00 AM, PoSHMagiC0de said: You are trying to deauth while channel hopping. No workie. Your command for airodump-ng is not locking onto a particular AP nor is it locking onto a channel. If you want to deauth without airodump-ng running you will need to manually change your channel. sudo iwconfig mon0 channel <channel of ap> After that it should find it. If you are using airodump-ng then put in the bssid of the AP so it can lock onto it or even add the "-c" option and the channel number to lock it to a channel the AP is on and then it will find it. aireplay-ng does not have the ability to change its channel. It uses whatever channel the interface is currently on. Now i can't use aireplay since now the channel and AP number is conflict now...i spent 3 hours how to fix it..but I don't find any solution Quote Link to comment Share on other sites More sharing options...
Bigbiz Posted December 22, 2021 Share Posted December 22, 2021 Set the you wifi module to the channel you wany ifconfig wlan0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.