levisiccard Posted September 13, 2013 Share Posted September 13, 2013 Hey guys, I just bought a D-SUN USB to TTL adapter with 5 pins. 1:3V3 2:TXD 3:RXD 4:GND 5:5V Will I be able to reflash my pineapple IV with this adapter? Quote Link to comment Share on other sites More sharing options...
Foxtrot Posted September 13, 2013 Share Posted September 13, 2013 YOU DON'T USE THE VOLTAGE PINS. Just to make sure you read it :D. Using the pins are bad news, any USB to UART with TX, RX and GND works. Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted September 13, 2013 Share Posted September 13, 2013 Hey guys, I just bought a D-SUN USB to TTL adapter with 5 pins. 1:3V3 2:TXD 3:RXD 4:GND 5:5V Will I be able to reflash my pineapple IV with this adapter? Yes, but please read the clean flash wiki carefully. (Link in my signature) Quote Link to comment Share on other sites More sharing options...
levisiccard Posted September 15, 2013 Author Share Posted September 15, 2013 Think you guys. I already knew not to use the voltage pin and i'm not planning to Brick my precious but in case that would happen i want to be prepared with the right tools. Gracias Quote Link to comment Share on other sites More sharing options...
anthrounit Posted September 26, 2013 Share Posted September 26, 2013 I just debricked my Mark 4 Pineapple and it was because it just kept rebooting repeatedly but that started after I tried the reset button under it. Anyway I did the debricking with the serial usb thing from the hak shop and as long as its got the serial to usb devices hooked up and connected to my computer the pineapple is fine the second i disconnect it its back to rebooting. I messed with the pins and found it only does it when I disconnect the ground pin. Any idea's as to why this is or how to get it to stop without grounding itself to probably the negative line. Quote Link to comment Share on other sites More sharing options...
eduado Posted March 15, 2014 Share Posted March 15, 2014 I connected the 5V VDD pin (and my pineapple is dead ... :/ do you have any solution? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted March 15, 2014 Share Posted March 15, 2014 I connected the 5V VDD pin (and my pineapple is dead ... :/ do you have any solution? Nope, it's dead. This is why we state to never connect the voltage pins. If you do, 3.3V is the one you need. But there is no need to connect any voltage pins. Best regards, Sebkinne Quote Link to comment Share on other sites More sharing options...
eduado Posted March 15, 2014 Share Posted March 15, 2014 ohh wow!! ... is just what you not wanted to hear ... thanks for the reply anyway. Quote Link to comment Share on other sites More sharing options...
eduado Posted March 15, 2014 Share Posted March 15, 2014 one last question, only for entertainment, is there a way to get the electric scheme? B) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.