Thetra

Thank you telot. I can always count on a good answer from you, :-) I will start the Build as soon as i have the parts at hand, and off course post a link if the monitoring is a success. Again thank you for the quick reply best regards Thetra

Hi guy`s Just have a question some of you Gurus might be able to answer, I trying to set up a monitoring of a eagle nest here in Norway using my Go pro 3 with WiFi pack. the problem is that the signal is way to weak, So, i was wondering. is it possible to use the Alfa R36 as a Range extender/repeater to increase the signal. If so, have any of you a good way to make this a "Plug`n Play" setup. Also i see the power consumption on the Alfa R36 will give me a possibility to use solar panel power to keep it running. am i correct here? I would really appreciate all inputs and feedback to make this the best real time monitoring as possible, hope to hear from the forum best regards Thetra

:-) Thats what the forum is for. Enjoy!

Try using APN=tmn > Username=tmn > Password=tmn or APN=internet > Username=tmn > Password=tmn i came across a post with people having a similar issue with TMN, hope this helps

Sorry for bringing up an old thread, but have anyone tried this yet? and if posible, would this be doable through a module??

Same here, Starts to enoy, Each time i see a chance at work to grab the new FW it`s offline,

Could not agree more telot, A OSX Module would definatly take the Pineapple to the next level of userfriendlyness in theese Apple times. Thetra

Hi webdirector I used the 12d1:1506 Worked as a charm, JUST be sure you are not on battery power I am currently using a bit overpower, At 12V 2A. and have done so successfully for as long as i had the Apple

Well... TigerTeam TV series, One of the best i`ve seen, Only 4 episodes dough, But It is great.

I own the Elite plug, And i absolutely love it, have only used it on two jobs, But it saves you time and also it gives you a good reason to pick up on the SE skills, I also have the PWNPHONE, Also one of my favorite gadgets,

Oh Joy, Finally managed to get this to work on the Huawei E353, even dough it showed up as E398. I used the USB Mode_Switch for 12d1:1506, It runs smooth as silk, Thank you soo much guys for helping me sorting this out, By the way, Just so nobody does the same F"#¤% i did the first 2 hours of trying, DO NOT USE BATTERY POWER before you get it up and running, Damn rookie mistake from my side . Also double and triple check the APN settings, Google is your friend

Well.. Thanks guy this looks like it helped, but any ideas on wtf is going on with this, i have tried all of my carriers setting for 3g but no luck. at least my modem is found now but i have connection issues Jan 1 00:10:43 Pineapple local2.info chat[3364]: abort on (BUSY) Jan 1 00:10:43 Pineapple local2.info chat[3364]: abort on (NO CARRIER) Jan 1 00:10:43 Pineapple local2.info chat[3364]: abort on (ERROR) Jan 1 00:10:43 Pineapple local2.info chat[3364]: report (CONNECT) Jan 1 00:10:43 Pineapple local2.info chat[3364]: timeout set to 10 seconds Jan 1 00:10:43 Pineapple local2.info chat[3364]: send (AT&F^M) Jan 1 00:10:43 Pineapple local2.info chat[3364]: expect (OK) Jan 1 00:10:43 Pineapple user.notice root: 3G: firewall stopped Jan 1 00:10:53 Pineapple local2.info chat[3364]: alarm Jan 1 00:10:53 Pineapple local2.info chat[3364]: Failed Jan 1 00:10:53 Pineapple daemon.err pppd[3359]: Connect script failed

Well if it is a Geo Trace your worried about i can see where your going, But if you buy a prepaid Sim, It dont store any credentials, You might be borderline paranoid to start worrying about that:-P but as Curt Cobain once said : “Just because you're paranoid doesn't mean they aren't after you”

Thank You So much kevambert, i will try this as soon as i am in front of my Pineapple, If there is anything i can do to help you, please let me know Gratefully Thank you Thetra

Hi Kevambert, Well basicly on every thing, Looks like it is not recognized, I used information from Niggizito above, but no luck, I concluded that i suck at mode_switching since i tried a ZTF MF 656 as well with out any luck, If you would be bothered to share how you managed to set it up i would be eternally grateful,

Hi Guy`s Just a quick question, Have anyone managed to get the USB MODE_Switch to handle the Huawei E160 3G Dongle to work with the Mk4? If So i would really appreciate some help getting mine up and running, I`ve tried and failed miserably :-( Thanks in advance Thetra

Well... I managed to solve this, A rookie mistake but yet so easy to do, If any one here experience the same problem, Isolate the Parallels under > configure >Options> Security. Set network adapter to Ethernet under networking. And voila.. Rock and Roll. Now i am a happy camper again Edit: Well it looks like i have miss calculated this a bit, Everything looks like it is working but after a test in lab environment wit 3 ea XP boxes also some linux boxes, No luck, hmmm.... weird enough, the pineapple shows but no auto connect, even dough i made a preferred network, I`ll give some more feedback's after i have tried it on a Win 7 machine. In the mean time, Does any of you wizards have a clue whats happening, I am running FW 1.0.2

Thank you both for your input, Unfortunaly the previous post was the last thing i managed to do on my mac before it died, :-( But as soon as i have managed to wake it up from the dead again i will give it a try yet again, Anyway thank you Thetra

Hi guy`s just wondered, does any of you have experience with the pineapple running BT5 under parallels on a MBP. to be honest this is my first try on parallels, and since i loved this little "Devil" so mutch i thought i needed to give it a go on my mac running BT5R2 under parallels, I cant seem to find the correct network setting to get this working, i had a similar problem on my first Pineapple running VMware but this was solved in VMware network manager adding a Virtual network card, in parallels i cant figure out how to do this. by the way, Absolutly love what Hak5 have managed to put into this beauty, Cudos to Darren, Seb and all of contributing parts. Thetra

I might be slow and yes i might have missed out on something, But Darren, The board looks strangly alike the ALFA R36? Am i totaly off here, Love what you have created here, I cant wait to get my hands on this,Cudos to you and the "Hak5 Family"

Norwegian

That`s just Pure sexyness Mr Protocol. Love the hack! will try to replicate/modify this my self

I use the Pwnplug Elite for some of my gigs, and i have to say, it almost takes the fun out of pentesting, but again it forces you to pick up on you SE skills. The guy`s in pwniexpress rocks, Great products and good support.

Hi Telot. Well i made a similar cabel for the Mk1 And i am curently using it for the mk111. Just a idea, If you use a dual corded USB cabel, The voltage messured on mine is now 8,7 V, It is Stabel and working 100% i used a short cabel since i have the AP51 attached to the back of my screen using a suction cup.

I had exactly the same problem under BT5R1 Gnome, Worked as a charme on KDE. Don`t ask me why,