Search the Community

Just got my nano finally and got a nice SD card which formatted from the nano interface.When I try to install any of the modules I get no "install to SD" option.Tried to factory reset and done the same thing several times but I never seem to get the option. Any help would be appreciated ok this is crazy.As soon as I stopped typing this I tried once again to install a module and I got the SD option

Hello, Sebkinne! I am a technical beginner from China (my English is not good, so use the translation software, if some statements are not smooth, please forgive me!), My friends help me from abroad to bring back a team your research and development equipment. I would like to ask you about SD cark! I would like to SD cark mounted on the equipment, the system uses SD cark capacity! Hopefully you can tell me how to configure "config 'global'" and "config 'mount'" and "config 'swap'". SD cark has been partitioned into ext4 and swap format. Currently I use the nano1.13 Thanks again Sebkinne to provide us with such a good device!

I've searched the forum and not found a spec for building the yagi antenna mount with tripod etc as displayed in the Hak5 store images. I live in UK so am planning to buy a tripod from Amazon along with the antenna (from somewhere local). My question is, please - can I just buy any camera tripod mount and adapt it for the dual yagi use with pineapple all mounted snugly on there? Or are there some easy tips to follow to make setup easier? Thanks!

UPDATE: /sd contains nothing, it isnt mounted! Any suggestions? Thanks guys! Current firmware 1.04 I had a update in pineapple bar and configuration was missing so i restarted a few times (there was a new update that fixed this issue :), but upon restart /sd contains nothing. I had all my infusions/scripts/captures etc on there. Its my understanding that the pineapple needs the SD to operate? its strange its not mounted to /sd but i can still for the most part use the pineapple. Maybe a mounting issue? what should i do? edit: Restored firmware though web interface.... still no SD! Corruption? (fdisk -l) Fstab Configuration: root@Pineapple:/dev/sdcard# ls sd So i got another SD card formatted it to fat32 and loaded both update.bin (md5 hash checked) and md5. it does its magic and boots, i ssh to the device and /sd isnt mounted and issues with webclient (http://172.16.42.1:1471/ doesnt work http://172.16.42.1/ changes to http://172.16.42.1/redirect.php then goes back to whatever page i previously was on. Im considering loading stager.bin, i dont think it will work but im out of ideas. UPDATE: so ive reloaded the stager.bin > booted with sd card, create new password etc. The new SD card is showing up now but.... i put the old SD card in hoping it would be fixed /sd still doesnt mount. Im assuming these files are lost and SD is prob no good? SYSLOG: DMESG:

Hi- So I had my pineapple set up before with Sandisk Cruzer micro - properly partitioned and such with 12Gb Ext4 as main and ~4Gb Ext4 as swap... It was working in the pineapple, but now that I've upgraded the firmware to 2.8.0, I can't get infusions to install to it anymore. The really interesting thing is that from Putty, I can install to the USB using opkg command line... Why isn't the web interface reading the USB? Here is my fstab config: lusb output: lsusb Output Bus 001 Device 002: ID 0781:5571 SanDisk Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and this is what mount says: Any help would be extremely appreciated! I haven't reformatted and started over with the drive just yet... I'm hoping to avoid that. Thanks in advance!

I tried making more room on the Wifi Pineapple IV. I have port 80 open but get error message "No such file or directory" I am unable to ssh to pineapple. I tried flashing but unable to. I can push the reset button and telnet in but I am unable to change the password because the filesystem is read-only. I am unable to remount the filesystem because I don't know the mount point. Can someone please help?