My Nano Problems ..

[MRWOP3]

No broadcast's (I push pineapdaemon and other settings ) ,blank led status(No color) and i dont see clients for ap-clients scanning.It's a firmware problem or device problem ?

Sometimes i dont click modules and another tabs .

I do reset the device,but sadly doesnt solve this problem.

[Mr-Protocol]

Can you verify what firmware version that is installed?

You can check under the "Advanced" option of the Dashboard.

[MRWOP3]

1.0.5 installed .

[Mr-Protocol]

Is this connected to your computer or with a phone/tablet? Can you give me a step by step to recreating your issue and I will test it with my device?

Thanks.

[MRWOP3]

Thank you for answering to my problem. I use pineapple on my win7. Version 1.04 and older version,i dont have this problem but now i have some problem with using this device.

1 st problem i dont seen clients with scanning.Only seen ssid's ..

2nd i dont click modules or another tabs.It seems freezing..

3rd i start pineap daemon and other settings,my device wont shared fake ap's ..

I reset my pineap twice but this problems continued ..

(Sorry for my English )

Thanks Root Admin ..

[Foxtrot]

Someone else also had this problem in the IRC. Although resetting his device worked for him.

Can you post the contents of /etc/config/wireless? Be sure to get rid of any passwords you set if they are in that file.

Thanks

[reed00112]

I've had similar issues with mine, although mine wont scan AP's, just clients! I have also reset and switched firmware from 1.0.5 to 1.0.3 and neither helped.

[MRWOP3]

/etc/config/wireless :

config wifi-device 'radio0'

option type 'mac80211'

option channel '11'

option hwmode '11g'

option path 'platform/ar933x_wmac'

option htmode 'HT20'

config wifi-iface

option device 'radio0'

option network 'lan'

option mode 'ap'

option ssid 'Pineapple_7098'

option encryption 'none'

option hidden '1'

option macaddr '00:b0:4a:87:8e:56'

config wifi-iface

option device 'radio0'

option network 'lan'

option mode 'ap'

option encryption 'psk2+ccmp'

option ssid 'DangerZone'

option key '.............................'

option disabled '0'

config wifi-device 'radio1'

option type 'mac80211'

option channel '11'

option hwmode '11g'

option path 'platform/ehci-platform/usb1/1-1/1-1.1/1-1.1:1.0'

option htmode 'HT20'

config wifi-iface

option device 'radio1'

option ifname 'wlan1'

option network 'lan'

option mode 'sta'

option ssid 'Pineapple_78B9'

option encryption 'none'

[MRWOP3]

Someone else also had this problem in the IRC. Although resetting his device worked for him.

Can you post the contents of /etc/config/wireless? Be sure to get rid of any passwords you set if they are in that file.

Thanks

[Foxtrot]

There is a client in that screenshot. Under the "AIRTIES_RT-206" access point there is the MAC Address "94:65:9C:17:B4:11". That MAC is a client to the AP above it.

Edited January 31, 2016 by Foxtrot

[b0N3z]

ive had the same problems, but i just reset the pineapple completely and it seemed to work. it still happens from time to time but if i shutdown the pineapple and start it agian or use a different device to access the gui it seems to work just fine. Sometimes firefox gives me problems so ive just been using chrome lately