barry99705 Posted July 13, 2009 Share Posted July 13, 2009 Sure. The actual filenames are these after each link, exactly as you can read them. These files are also exactly ~40mb each. Yea, have you tried opening one in a text editor? Oh wait. You're using the wrong program with these tables. They are for cowpatty. Quote Link to comment Share on other sites More sharing options...
Seether Posted July 13, 2009 Share Posted July 13, 2009 They are for cowpatty. Hell... no chances of conversion? Quote Link to comment Share on other sites More sharing options...
barry99705 Posted July 13, 2009 Share Posted July 13, 2009 Hell... no chances of conversion? Most likely not. I'm not sure how those probrams use the tables. These tables are salted with the ssid and a pretty cool dictionary file specifically for wpa. Quote Link to comment Share on other sites More sharing options...
Mark Posted July 18, 2009 Share Posted July 18, 2009 The link to the torrent seems to be down, are these still avaliable as the mass 40gb? Quote Link to comment Share on other sites More sharing options...
miT Posted July 19, 2009 Share Posted July 19, 2009 The link to the torrent seems to be down, are these still avaliable as the mass 40gb? I have been working with Renderman to setup a backup tracker to the Schmoo group on the OMGIRC servers. I will update this posting once its up. At the moment we are looking for users that have successfully downloaded the hashes to start seeding on the backup torrent tracker. Private msg me if you can help! Quote Link to comment Share on other sites More sharing options...
TAPE Posted July 24, 2009 Share Posted July 24, 2009 Any further news on this by any chance ? I have been downloading a couple (http://www.offensive-security.com/wpa-tables/), some seem fine, some not able to start.. and a couple stopped at 60 / 80 % :( I have been working with Renderman to setup a backup tracker to the Schmoo group on the OMGIRC servers. I will update this posting once its up. At the moment we are looking for users that have successfully downloaded the hashes to start seeding on the backup torrent tracker. Private msg me if you can help! Quote Link to comment Share on other sites More sharing options...
xANTIx Posted July 31, 2009 Share Posted July 31, 2009 Just so you know I found it on isohunt with the torrent name mention earlier. It's kinda downloading slow. But better than doing everys single one of those links. Quote Link to comment Share on other sites More sharing options...
lamlam Posted August 11, 2009 Share Posted August 11, 2009 Hi there, Would a new one like me be welcome here? Thanks so much in deed. demande simulation pret personnel en ligne - Pret personnel en ligne et de comparer les meilleurs taux afin de... La demande de prêt personnelen lignedemande simulation pret personnel en ligne Quote Link to comment Share on other sites More sharing options...
smapstar Posted September 10, 2009 Share Posted September 10, 2009 I have researched for the past 3 hours trying to figure things out on my own (because I would have it no other way) however I've hit a huge wall. I found many dictionaries prior to downloading the 33gig pack, and tried them. I've used airodump aireplay etc to successfully grab a WPA handshake. But to generate a table based on a specific SSID, i'm stuck. SSID: EAWHITE . I have the 33gig package but don't know where to start. You obviously don't use aircrack-ng (which is all i know how to do.) I have backtrack4 on if that helps or could use a windows PC as I've saved the .csv .cap files etc. Is there an extensive tutorial out there somewhere using this package? Because when I opened the SSID.txt file EAWHITE was not listen nor is SMAPSTAR. So I know those are only the most common and not all. Thanks guys sorry to be the noob in the room! Quote Link to comment Share on other sites More sharing options...
miT Posted September 11, 2009 Share Posted September 11, 2009 Thanks guys sorry to be the noob in the room! HAK5 = n00b welcomed Make sure the card you're using supports going into prism mode. I know this may seem obvious but its the main thing ppl overlook when starting with wireless pen testing. Driver patches for the cards may be needed and are available with the tar, svn and directly in the wiki for aircrack-ng. I will be posting tutorials on my blog about this in the near future, starting with cracking WEP (easy peasy). Quote Link to comment Share on other sites More sharing options...
smapstar Posted September 11, 2009 Share Posted September 11, 2009 HAK5 = n00b welcomed Make sure the card you're using supports going into prism mode. I know this may seem obvious but its the main thing ppl overlook when starting with wireless pen testing. Driver patches for the cards may be needed and are available with the tar, svn and directly in the wiki for aircrack-ng. I will be posting tutorials on my blog about this in the near future, starting with cracking WEP (easy peasy). There are actually 2 youtube tutorials walking you through every step of using backtrack and aircrack-ng etc to crack WEP and WPA-PSK. Your time however would be incredibly more well spent explaining what to do with the 33gig pack from the get go. I can't find a tutorial explaining it at all. :/ Quote Link to comment Share on other sites More sharing options...
miT Posted September 11, 2009 Share Posted September 11, 2009 There are actually 2 youtube tutorials walking you through every step of using backtrack and aircrack-ng etc to crack WEP and WPA-PSK. Your time however would be incredibly more well spent explaining what to do with the 33gig pack from the get go. I can't find a tutorial explaining it at all. :/ My tutorials are based off of Ubuntu, not backtrack, so it wouldn't be a waste of my time :) You have to pre-compile your SSID into the 33gb rainbow table using cowpatty. Quote Link to comment Share on other sites More sharing options...
barry99705 Posted September 11, 2009 Share Posted September 11, 2009 There are actually 2 youtube tutorials walking you through every step of using backtrack and aircrack-ng etc to crack WEP and WPA-PSK. Your time however would be incredibly more well spent explaining what to do with the 33gig pack from the get go. I can't find a tutorial explaining it at all. :/ Inside the package is the top 1000 ssid's on wigle. Set up your home wifi router to have the ssid of linksys, give it a stupid wpa password of say, password. Run airodump against the channel you set your access point to. Connect to your access point with another computer, you'll notice airodump says it got the handshake. Now run your cap file in cowpatty with the linksys table in the cowf pack. Quote Link to comment Share on other sites More sharing options...
smapstar Posted September 11, 2009 Share Posted September 11, 2009 Inside the package is the top 1000 ssid's on wigle. Set up your home wifi router to have the ssid of linksys, give it a stupid wpa password of say, password. Run airodump against the channel you set your access point to. Connect to your access point with another computer, you'll notice airodump says it got the handshake. Now run your cap file in cowpatty with the linksys table in the cowf pack. Thanks barry for the response! Yeah I actually fully understand everything you're saying and have for some time. So that means I wasn't clear with my question. The issue is, the SSID is not, linksys, it's SMAPSTAR in caps. Thus with my given situation, how can I take advantage of the 33gig pack, with this SSID. What are the steps to import it into the list of 1,000 SSID's making it 1,001 SSID's for personal use. I hope that helps clear it up. Quote Link to comment Share on other sites More sharing options...
smapstar Posted September 12, 2009 Share Posted September 12, 2009 would love a response. I know it seems remedial but I'm stuck on it, and need the real answer. Then I think I can research and find all the other answers, researching the last post just brings me back to the same question. Quote Link to comment Share on other sites More sharing options...
barry99705 Posted September 13, 2009 Share Posted September 13, 2009 Thanks barry for the response! Yeah I actually fully understand everything you're saying and have for some time. So that means I wasn't clear with my question. The issue is, the SSID is not, linksys, it's SMAPSTAR in caps. Thus with my given situation, how can I take advantage of the 33gig pack, with this SSID. What are the steps to import it into the list of 1,000 SSID's making it 1,001 SSID's for personal use. I hope that helps clear it up. Ohhh! Well in that case, you're going to have to create your own table. There is a text file in the download with all the passwords used to create the tables. Use that file and genpmk to create your own table. Might take a while, depending on how much power your computer has. Quote Link to comment Share on other sites More sharing options...
ACiDXeNo Posted September 25, 2009 Share Posted September 25, 2009 Hello all, Can someone please link the password list, I really don't want to download a 33gb rainbow table for a 5mb text file. I can't find the text file anywhere else. Quote Link to comment Share on other sites More sharing options...
barry99705 Posted September 28, 2009 Share Posted September 28, 2009 Hello all, Can someone please link the password list, I really don't want to download a 33gb rainbow table for a 5mb text file. I can't find the text file anywhere else. http://www.churchofwifi.org/FileLib/9-passwords2.zip Quote Link to comment Share on other sites More sharing options...
ohai Posted September 29, 2009 Share Posted September 29, 2009 http://www.churchofwifi.org/FileLib/9-passwords2.zip That's the older one. The one used for the newer, 'uber' tables, with ~1,000,000 words: http://www.churchofwifi.org/FileLib/9-final-wordlist.zip Quote Link to comment Share on other sites More sharing options...
coachmurray Posted November 13, 2009 Share Posted November 13, 2009 I know this is a stupid question. But, how do I open the file? There's no file extension. Thanks. Quote Link to comment Share on other sites More sharing options...
miT Posted November 14, 2009 Share Posted November 14, 2009 I know this is a stupid question. But, how do I open the file? There's no file extension. Thanks. What file? Quote Link to comment Share on other sites More sharing options...
barry99705 Posted November 15, 2009 Share Posted November 15, 2009 What file? You know, the file. Quote Link to comment Share on other sites More sharing options...
digininja Posted November 15, 2009 Share Posted November 15, 2009 File.open("the_file", "r") Quote Link to comment Share on other sites More sharing options...
garryb Posted November 19, 2009 Share Posted November 19, 2009 ok guys i have succesfully have got a wpa handshake and downlaoded all the 33.3 gb file with cowpatty , now im a bit confused how do i get this thing to show the password? Quote Link to comment Share on other sites More sharing options...
garryb Posted November 19, 2009 Share Posted November 19, 2009 some help guys ??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.