dannymcc Posted April 25, 2014 Share Posted April 25, 2014 Hi, When using Darren's ARDrone infusion to send telnet messages to Parrot ARDrones, does anyone know what commands to set on a DIP switch to make it auto run and continue running? Thanks, Danny Quote Link to comment Share on other sites More sharing options...
m40295 Posted April 26, 2014 Share Posted April 26, 2014 I would assume. pineapple infusion ardrone start Quote Link to comment Share on other sites More sharing options...
dannymcc Posted April 27, 2014 Author Share Posted April 27, 2014 Perfect, thank you. I didn't know about the pineapple infusion <> start command. Quote Link to comment Share on other sites More sharing options...
edwingeorge747 Posted February 6, 2015 Share Posted February 6, 2015 Has anyone tried the ardronepwn infusion. When i try to run the command it ask for interface used. What should i put in there? Any help is appreciated.. Quote Link to comment Share on other sites More sharing options...
sud0nick Posted February 6, 2015 Share Posted February 6, 2015 It probably wants the wireless interface you are going to use to send the kill signal. Most likely wlan1 since wlan0 is your AP. Quote Link to comment Share on other sites More sharing options...
edwingeorge747 Posted February 6, 2015 Share Posted February 6, 2015 Thank You so much sud0nick Quote Link to comment Share on other sites More sharing options...
edwingeorge747 Posted February 6, 2015 Share Posted February 6, 2015 Can you tell me how to check files inside a drone. Like is there any way to connect drone using linux and see the files used. Quote Link to comment Share on other sites More sharing options...
sud0nick Posted February 6, 2015 Share Posted February 6, 2015 Watch the videos I posted in your other thread. I don't have a Parrot ARDrone so I can't test this but it looks like he is just connecting via SSH. I think he said it's running BusyBox and it broadcasts an SSID. You can connect to the AP, SSH into it, and view the files that way. Quote Link to comment Share on other sites More sharing options...
edwingeorge747 Posted February 6, 2015 Share Posted February 6, 2015 okk.. Actually the ip of ar drone is 192.168.1.1 when i try to telnet into it says connection refused and even when i ping i am not able to receive packets.. But i am able to connect the drone through my mobile wifi and fly it Quote Link to comment Share on other sites More sharing options...
sud0nick Posted February 6, 2015 Share Posted February 6, 2015 telnet ??? The default telnet port is 23 which is most likely not open on the ARDrone. Use SSH and you might get in. That's what Darren did in the video. Have you set a static IP address within the 192.168.1.0 network? That's important, too. Quote Link to comment Share on other sites More sharing options...
edwingeorge747 Posted February 6, 2015 Share Posted February 6, 2015 Darren had used ssh to get into the wiffi pineapple and not the drone. i was thinking of doing something like getting inside the drone to know about its various files Quote Link to comment Share on other sites More sharing options...
sud0nick Posted February 6, 2015 Share Posted February 6, 2015 My bad he was using telnet. Check your network settings. Those are most likely wrong if you can't even ping it. From what he said in the video it's just a BusyBox instance so if you still can't see the files then look on their website to get an idea. Quote Link to comment Share on other sites More sharing options...
edwingeorge747 Posted February 7, 2015 Share Posted February 7, 2015 Yup got it.. Thank you so much Quote Link to comment Share on other sites More sharing options...
edwingeorge747 Posted February 11, 2015 Share Posted February 11, 2015 When i start the ardronepwn infusion it runs completely fine. But it does not kill the program.elf file in the drone which makes the drone fall down. But when i telnet into the drone and execute the command the program.elf process is getting killed and the drone stops and starts after some time. Quote Link to comment Share on other sites More sharing options...
cornz Posted April 11, 2015 Share Posted April 11, 2015 Very new to this so could be something I'm not seeing but after downloading the ardronepwn infusion, and after confirming its installed, I am unable to see the "box" for ardronepwn anywhere... is this normal or am I just being a bit thick?? Cornz... Quote Link to comment Share on other sites More sharing options...
ARDETROYA Posted April 11, 2015 Share Posted April 11, 2015 Ardronepwn it´s a command line infusion, not a system infusion. You sould log into your pineapple through ssh and search for it Quote Link to comment Share on other sites More sharing options...
cornz Posted April 11, 2015 Share Posted April 11, 2015 That's enough of a crumb for me. thank you... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.