sawks

Followed this guide, and get this error: [#] RubberDucky Programming Script [-] Programming File: [duck_v2.1.hex] Can't load jvm.dll I have installed Java: Directory of C:\Program Files (x86)\Java\jre1.8.0_141\bin\client 20/07/2017 11:49 <DIR> . 20/07/2017 11:49 <DIR> .. 20/07/2017 11:49 12,713,984 classes.jsa 20/07/2017 11:49 3,866,176 jvm.dll 20/07/2017 11:49 1,423 Xusage.txt 3 File(s) 16,581,583 bytes Browser check: Verified Java Version Congratulations! You have the recommended Java installed (Version 8 Update 141). Any ideas?

yeah, that would be great!!!

Hi all, ive read a few of the forums and found the topic below, but it didnt work. https://forums.hak5.org/index.php?/topic/33319-using-eth0-connected-to-a-router-with-dhcp-to-supply-internet/ What i want is to be able to use the Pinapple (on latest FW) to plug into a network (wired) which will lease an IP to eth0 via DHCP. Then I want the pinapple to lease my clients (laptop ect) an internal ip via another DHCP pool served out from the pinapple. If i use the CLIENT mode on the pinapple it just relays the DHCP from the main router, through the pinapple and to my laptop. I then cant access the pinapple. Any help would be appriciated. Sawks

Hi, ive noticed a few people talk about wireless degradation since the update, and I've found the same. I was using the Mk5 without any problems, updated some of the infusions and generally surfing through the mk5 without problems. Then i spotted the upgrade, and upgraded. Then i went to set everything up and noticed really bad wireless connection from the mk5 to my access point. I tried to connect directly to the access point with no problem. As soon as i tried to download anything, or at random times i would loose ping to the internet from the pineapple and to the access point ip. You can see below, massive chunks of missing pings. So just to check i reset the pineapple and did a fresh install with the same experience. Then i put the backup of the card i got with 1.0.0 back in, and all was well again. No complaints, just thought I would share my experience. ... 64 bytes from 8.8.8.8: seq=216 ttl=44 time=18.759 ms 64 bytes from 8.8.8.8: seq=217 ttl=44 time=18.730 ms 64 bytes from 8.8.8.8: seq=251 ttl=44 time=1013.053 ms 64 bytes from 8.8.8.8: seq=252 ttl=44 time=18.584 ms 64 bytes from 8.8.8.8: seq=253 ttl=44 time=18.517 ms .... 64 bytes from 8.8.8.8: seq=16 ttl=44 time=18.943 ms 64 bytes from 8.8.8.8: seq=17 ttl=44 time=19.108 ms 64 bytes from 8.8.8.8: seq=18 ttl=44 time=20.621 ms 64 bytes from 8.8.8.8: seq=51 ttl=44 time=2016.394 ms 64 bytes from 8.8.8.8: seq=52 ttl=44 time=1016.505 ms 64 bytes from 8.8.8.8: seq=53 ttl=44 time=19.104 ms ... 64 bytes from 192.168.10.200: seq=92 ttl=64 time=1.310 ms 64 bytes from 192.168.10.200: seq=93 ttl=64 time=3.420 ms 64 bytes from 192.168.10.200: seq=168 ttl=64 time=1995.034 ms 64 bytes from 192.168.10.200: seq=169 ttl=64 time=995.277 ms 64 bytes from 192.168.10.200: seq=170 ttl=64 time=1.366 ms 64 bytes from 192.168.10.200: seq=171 ttl=64 time=10.327 ms 64 bytes from 192.168.10.200: seq=172 ttl=64 time=1.671 ms 64 bytes from 192.168.10.200: seq=173 ttl=64 time=1.700 ms ... EDIT: retried new update, had same problem. Disabled WLAN1 and enabled and all is good again. A few reboots, i can replicate the problem but shutting down WLAN1 and bringing it back up fixes it. No matter what, still love it.

Ps afx should show you everything running , look for yor try session and it should show bash and then your command ( if its still running)

Nope, this one was pure DNS, not portscans. The episode was a fair while back. Sawks

A while back there was a Hak5 episode that talked about a website that had a dns search engine. Someone had resolved a ton of IPS and put the results in a searchable format. Can anyone remember the episode, or the website? Thanks to anyone who can remember. Sawks

Thats the info i was after, the s3 looked a lot more powerful than the nexus, but the nexus was the one that looked better for dabbling. I was down to s3 vs nexus and you have tipped the boat. Thanks Sawks ps anyone know if new nexus is on the horizon? worth waiting out for...

Hi folks, im ready for an upgrade and looking at the S3, the Nexus and a few HTC models. Is it just a personal preference choice, or does one stand out. I noticed the guys at Hak5 were given s3's but seem to be back using Nexus, so is the Nexus a better choice? Any help would be great. Sawks.

Awesome , thanks everyone for the amazing help on this, and works like a treat!!!!

Amazing, ill try it tonight, exactly the info I was after. Thanks all. Sawks

So i meant with dns spoof running. What domains do i need to whitelist to stop it happening, or does it always happen if the ip of the AP offers up pages.

Hi all, does anyone know how I can stop the auto webpage from loading when an iphone connects to my pineapple open wifi? I understand its for portal based wifi so they can put in a username and password. The only thing i can try and guess is if it tries to goto the real internet once connected and if it doesnt get the response its expecting it requests the default page from the ip its connected too. Anyone who can help? Sawks

Wouldnt it be best to use the 5v usb over the 9v for the pineapple as it allows more power. 2.1A over the 9v 2.0A Frm anker website: Output 2*USB 5V/2.1A DC9V/12V 2A

Sorry for the delayed response and thanks for looking at my thread. Im starting it from the Start page, and I have firmware 2.5.0 (latest)

Can anyone give me any hints on urlsnarf trouble shooting? I have karma on, and web is via PoE/LAN port. Ive checked the urlsnarf log while browsing through the pineapple and nothing is being logged. Web is working fine via the pineapple then through PoE/LAN port to a openWRT router with a 3g dongle. Any troubleshooting tips would be appriciated, the log is empty no matter when I go on the web. Sawks

Re-flashed and still not working.

Im using whistles module but have run into a problem. It works fine if my 3g dongle is connected to the pineapple, but at the moment ive got my traffic going to another openwrt box with the dongle it it. Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 172.16.42.2 0.0.0.0 UG 0 0 0 br-lan 172.16.42.0 * 255.255.255.0 U 0 0 0 br-lan So 172.16.42.2 is my openwrt box with a 3g in it, and im running karma and sslstrip on my pineapple (172.16.42.1) Internet access works fine with sslstrip on and off, but the verbose logs only log things when i goto the pineapple gui. 2012-08-09 11:51:53,964 Sending request via HTTP... 2012-08-09 11:51:53,979 Sending Request: GET /pineapple/modules/usbModules/sslstrip/sslstrip_data.php?lastlog nothing else I browse gets logged. Any tips? Sawks

Sounds like an amazing idea, and allows some of us new forum lurkers to feed back and help the stable release be...well stable. Ive been tweaking and changing my pineapple pretty much all day every day, (even at work) and cant get tired of it. Look forward to trying each release at it comes. Sawks.

How bazaar!! I SSHed into the pineapple and found in the configs the symbol " had been replaced with ... so if (strpos($ref, “example”)){ header('Location: example.html'); } was actually if (strpos($ref, ...example...)){ header('Location: example.html'); } so it didnt work. All fixed. sorry about that.

Just wondered if anyone whos got this working can give me any tips. I have pineapple mk4. dns spoofing is turned on. Dns spoof config = 172.16.42.1 example.com landing page config= <html> <head> <meta http-equiv="REFRESH" content="0;url=redirect.php"> </head> <body> </body> </html> redirect.php = <?php $ref = $_SERVER['HTTP_REFERER']; if (strpos($ref, “example”)){ header('Location: example.html'); } require('default.html'); ?> default.html just has text default, and example.html just has text hello when i goto example.com from a browser it redirect me to: http://www.example.com/redirect.php and brings up the text from default.html :( So its not redirecting to example.html Can anyone help??

So after a week of playing with open WRT and the pineapple ive learnt tons, and love this community. I cant wait to be able to start giving back once i learn some more. I do how ever have one last question ( i hope). My setup is a Pineapple mk4 with a small usb hub, a 8 gig sdcard in a reader and a hauwei E367. I had the sd card in the 3g dongle, but was having mount issues (duplicates like sda1 and sdb1) so I separated them. This works perfectly as long as I turn on 3g on boot. My problem is if I dont have the 3g dongle turn on and connect at boot, it seems to fall back to memory stick ID (no sd card in it) and I cant work out how to use usbswitchmode to change it back. This happens now and then. So my 3g.sh works perfectly, as long as lsusb shows: Bus 001 Device 005: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard but sometimes it shows Bus 001 Device 004: ID 12d1:1446 Huawei Technologies Co., Ltd. E1552/E1800/E173 (HSPA modem) im guessing this is usbstick mode. and I can see files in /etc/usb_modeswitch.d/ that have the switch string in them, but all documentation i can see is about modeswitch.conf. Can anyone give me any tips on how to use modeswitch? Thanks in advanced. Sawks

New Firmware worked like a charm. Problem fixed. Sebkinne....you are amazing, thank you so much. Sawks.

brand new flash, no changes made, just plugged in usb 3g: root@Pineapple:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard root@Pineapple:~# ls /dev/ttyUSB* ls: /dev/ttyUSB*: No such file or directory root@Pineapple:~# insmod usbserial vendor=0x12d1 product=0x1506 insmod: can't insert 'usbserial': File exists root@Pineapple:~# rmmod usbserial rmmod: can't unload 'usbserial': Resource temporarily unavailable root@Pineapple:~# rolled back, worked perfectly. 2.3.1: root@Pineapple:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard root@Pineapple:~# ls /dev/ttyUSB* ls: /dev/ttyUSB*: No such file or directory root@Pineapple:~# insmod usbserial vendor=0x12d1 product=0x1506 insmod: can't insert 'usbserial': File exists root@Pineapple:~# rmmod usbserial root@Pineapple:~# insmod usbserial vendor=0x12d1 product=0x1506 root@Pineapple:~# ls /dev/ttyUSB* /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3 root@Pineapple:~# all working, just for fun i reflashed 2.4.0 and again it didnt work. So it seems rmmod works on 2.3.1 but not on 2.4.0 L:(

Ace job but ive had to roll back to last version. Im using a Huawai E367 3g dongle and rmmod usbserial no longer works on new 2.4.0 version. I went back to old version and it worked, retried new version and it doesnt work. root@Pineapple:~# ls /dev/ttyUSB* ls: /dev/ttyUSB*: No such file or directory root@Pineapple:~# insmod usbserial vendor=0x12d1 product=0x1506 insmod: can't insert 'usbserial': File exists root@Pineapple:~# rmmod usbserial rmmod: can't unload 'usbserial': Resource temporarily unavailable root@Pineapple:~#