sawks

Wow after hours of pulling my hair out i finally fixed it. It seemed to try and mount the drives and then mount them again giving multiple mount points. I put "sleep 10" in /etc/init.d/fstab file after "START=20" and this waits 10 seconds before mounting giving it time to settle in. This has worked, so i can carry on setting up :) :)

I tried reflash and still problems. Its driving me insain. If i reboot the pineapple and plug in the usb 3g dongle with sdcard, no trouble with the 2nd fstab config (from darrens howto) Filesystem 1K-blocks Used Available Use% Mounted on rootfs 896 228 668 25% / /dev/root 5376 5376 0 100% /rom tmpfs 14764 112 14652 1% /tmp tmpfs 512 0 512 0% /dev /dev/mtdblock3 896 228 668 25% /overlay overlayfs:/overlay 896 228 668 25% / /dev/sda1 6896176 232068 6318160 4% /usb root@Pineapple:~# free total used free shared buffers Mem: 29524 21420 8104 0 2588 -/+ buffers: 18832 10692 Swap: 835444 0 835444 If I leave the 3g card in and reboot then i get : root@Pineapple:~# df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 896 228 668 25% / /dev/root 5376 5376 0 100% /rom tmpfs 14764 108 14656 1% /tmp tmpfs 512 0 512 0% /dev /dev/mtdblock3 896 228 668 25% /overlay overlayfs:/overlay 896 228 668 25% / /dev/sda1 6896176 232068 6318160 4% /usb /dev/sdb1 6896176 232068 6318160 4% /mnt/sdb1 and /usb is unaccesable. root@Pineapple:~# touch /usb/test touch: /usb/test: Input/output error root@Pineapple:~# touch /mnt/sdb1/test root@Pineapple:~# mount -a does nothing Any ideas? I dont want to have to take out the 3g dongle everytime i want to reboot. Any help would be ace thank you. *******FSTAB******* config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 1 config mount option target /usb option device /dev/sda1 option fstype ext4 option options rw,sync option enabled 1 option enabled_fsck 0 config swap option device /dev/sda2 option enabled 1

Its a Huawei E367 I just flashed it to the newest yesterday, but ill try flashing it again after work. Thanks peterfm

I hope someone can help, im following this guide: http://forums.hak5.org/index.php?showtopic=25882 To mount the sdcard on my 3g dongle (3g part is working) When I used the default : config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 0 config mount option target /usb option device /dev/sda1 option fstype ext4 option options rw,sync option enabled 0 option enabled_fsck 0 config swap option device /dev/sda2 option enabled 0 I get : Filesystem 1K-blocks Used Available Use% Mounted on rootfs 896 236 660 26% / /dev/root 5376 5376 0 100% /rom tmpfs 14764 136 14628 1% /tmp tmpfs 512 0 512 0% /dev /dev/mtdblock3 896 236 660 26% /overlay overlayfs:/overlay 896 236 660 26% / /dev/sda1 6896176 232068 6318160 4% /mnt/sda1 /dev/sda2 833284 28208 763304 4% /mnt/sda2 when i use the config in the guide: config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 1 config mount option target /usb option device /dev/sda1 option fstype ext4 option options rw,sync option enabled 1 option enabled_fsck 0 config swap option device /dev/sda2 option enabled 1 I get: root@Pineapple:~# df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 896 236 660 26% / /dev/root 5376 5376 0 100% /rom tmpfs 14764 104 14660 1% /tmp tmpfs 512 0 512 0% /dev /dev/mtdblock3 896 236 660 26% /overlay overlayfs:/overlay 896 236 660 26% / /dev/sda1 6896176 232068 6318160 4% /usb /dev/sdb1 6896176 232068 6318160 4% /mnt/sdb1 /dev/sdb2 833284 28208 763304 4% /mnt/sdb2 what the heck? why did it swap the mount i wanted for swap to sdb2? Any ideas? root@Pineapple:~# mkswap /dev/sda2 /dev/sda2: No such file or directory root@Pineapple:~# mkswap /dev/sdb2 /dev/sdb2: Device or resource busy 35.150000] RPC: Registered named UNIX socket transport module. [ 35.150000] RPC: Registered udp transport module. [ 35.160000] RPC: Registered tcp transport module. [ 35.160000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 35.430000] PPP generic driver version 2.4.2 [ 35.610000] ip_tables: © 2000-2006 Netfilter Core Team [ 35.830000] NET: Registered protocol family 24 [ 35.960000] nf_conntrack version 0.5.0 (461 buckets, 1844 max) [ 36.650000] usbcore: registered new interface driver ath9k_htc [ 36.900000] usbcore: registered new interface driver usbserial [ 36.900000] USB Serial support registered for generic [ 36.910000] usbcore: registered new interface driver usbserial_generic [ 36.920000] usbserial: USB Serial Driver core [ 36.960000] usbcore: registered new interface driver cdc_ether [ 37.070000] Error: Driver 'gpio-keys-polled' is already registered, aborting... [ 37.180000] usbcore: registered new interface driver rndis_host [ 37.310000] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 37.310000] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 38.730000] Unable to find swap-space signature [ 38.900000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 39.050000] Unable to find swap-space signature [ 40.580000] usb 1-1: USB disconnect, device number 2 [ 40.590000] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 40.590000] sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 [ 43.120000] device wlan0 entered promiscuous mode [ 44.490000] usb 1-1: new high-speed USB device number 3 using ath79-ehci [ 44.800000] scsi2 : usb-storage 1-1:1.5 [ 44.800000] scsi3 : usb-storage 1-1:1.6 [ 44.970000] device wlan0 left promiscuous mode [ 44.980000] br-lan: port 1(wlan0) entering disabled state [ 45.130000] device wlan0 entered promiscuous mode [ 45.820000] scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 45.820000] scsi 2:0:0:0: Attached scsi generic sg0 type 5 [ 45.830000] scsi 3:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [ 45.840000] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 45.860000] sd 3:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB) [ 45.900000] sd 3:0:0:0: [sdb] Write Protect is off [ 45.900000] sd 3:0:0:0: [sdb] Mode Sense: 0f 0e 00 00 [ 45.900000] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.060000] sdb: sdb1 sdb2 [ 46.210000] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 47.380000] Unable to find swap-space signature [ 47.890000] Unable to find swap-space signature [ 49.210000] Unable to find swap-space signature [ 49.620000] Unable to find swap-space signature [ 50.120000] Unable to find swap-space signature [ 50.940000] device wlan0 left promiscuous mode [ 50.940000] br-lan: port 1(wlan0) entering disabled state [ 51.180000] Unable to find swap-space signature [ 51.800000] device wlan0 entered promiscuous mode [ 52.050000] ath: Failed to stop TX DMA, queues=0x001! [ 54.210000] device wlan0 left promiscuous mode [ 54.210000] br-lan: port 1(wlan0) entering disabled state [ 54.460000] device eth0 entered promiscuous mode [ 54.650000] device wlan0 entered promiscuous mode [ 58.050000] br-lan: port 2(wlan0) entering forwarding state [ 58.050000] br-lan: port 2(wlan0) entering forwarding state [ 60.820000] Unable to find swap-space signature [ 61.120000] EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities [ 61.130000] EXT4-fs (sdb1): couldn't mount as ext2 due to feature incompatibilities [ 61.170000] EXT4-fs (sdb1): recovery complete [ 61.170000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 61.430000] Unable to find swap-space signature [ 61.730000] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities [ 61.740000] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibilities [ 61.770000] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 73.080000] br-lan: port 2(wlan0) entering forwarding state [ 367.190000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #2: comm ash: reading directory lbl

I'm pretty new to the pineapple (24h) but until someone can give you a certain answer i can try and help. The WPS button is usually for wifi protected setup ( a quick way of connecting devices) but on the pineapple its configurable from the GUI to do what ever you like. The "Karma is disabled when handling probe request" is explained in the FAQ, when you turn Karma on that stays as its part of the log, and new log entries will be shown above it. Its supposed to be there. Sawks

Ive seen people doing page redirects for password harvesting, but has anyone seen/done harvesting of mobile app username/password like iphone facebook app. Ive seen mobile site redirection , but wondered if it was possible to MITM app traffic. Cheers Steve (New HAK5 watcher) (Old sysadmin)