i8igmac

glad to see you up and runnung... what kind of wifi card? Are you using a powered usb hub? I would constantly watch /var/log/kern.log to try and identify any problems... do you have any usb disconnects? with full.sh running I have seen 24 hrs with know problem but noupstream.sh acts funny after a while I see dhcp fails to hand out ip (seems like to many clients will trigger this event)

http://docs.kali.org/armel-armhf/install-kali-linux-arm-raspberry-pi Support out of the box

Apt-get install kali-linux-wireless this is a large install. it may cover some of the basic modules you may be missing. on my first boot up this was my first install then git clone worked with no errors during /mana/kali-install.sh There is also apt-get install mana-toolkit but you will be missing the bash scripts you can also search for the specific module through apt

did you try Git clone link:to-mana-toolkit then try the install.sh

I had no idea vbox was apart of the equation... try another emulator. vmware. qemu.

Edit... tail -f /var/log/kern.log helped me solve my problems... plug in and see what happens I went into bestbuy and started to compare prices vs amp output... 15$ Usb hub 5v 2amp output is what I end up with... I can recommend a temp fix, but with out fully understanding your situation, my device would disconnect during heavy transfer after associated Iwconfig wlan0 rate 5.5M fixed This would fix my problem with other wifi cards,

apt-cache search firmware... its there Tail -f /var/log/kernel Now plug the card in and post what u see... also what does iwconfig show... do you see wlan0?

Well, maybe during heavy load it seems to draw more then 1.2amp... the b+ cant supply enough power for this alfa card. (Testing the karma like attacks)

http://i.imgur.com/xQuF9Fq.jpg http://i.imgur.com/RAtlIVl.jpg awus036nha v5 anker 15000 mah raspberry pi b+ 2 amp usb hub im at about 135$ so far (money i have made with tips during work hours) i had the pi plugged into 1amp and usb-hub+alfa-card plugged into 2 amp power supply and seems to run just fine... (fails other way around, alfa card needs 2 amps or disconnect/reconnect happens) the video above, i add this to my /etc/rc.local --> ./mana/run-mana/start-noupstream.sh with eth0 as the out interface, i have seen this thing go for 12 hours with out any dmesg errors... (./start-nat-simple.sh) i plan to get a nother alfa card for a good out interface... its ugly, at the moment, i plan to clean it up...

This has been a plan of mine [not the infusion part] i like to do things in ruby... It will be so easy and fun... my plan is for use with a mobile raspberry pi kali install... I have 4 desktops at home and pyrit already has a simple cluster configuration this stuff is only a hobby to me so my time invested is minimal. 1 machine benchmark is around 14000psk...

I don't own a pineapple, can you git clone or wget the package then run it?

Ok, so all my testing and long nights trying to save a buck, last night i spent a few bucks on a usb hub... hostapd has been running strong for maybe 5 hrs now... another day or 2 and ill have a anker v5 15000mah rechargeable battery delivered to my house... any experience with mana-toolkit?

I have read about needing vm drivers. I would start here Apt-cache search vmware | firmware or drivers and something

2 cards for testing wusb54g (does not suport master mode) AWUS036NHA (just got this card yesterday) kali 1.0.9 raspberry pi b+ i have 2 cards for testing... ill start with airbase-ng as it will support both cards... upstream=eth0 phy=wlan0 service network-manager stop rfkill unblock wlan ifconfig $phy down iwconfig $phy mode monitor ifconfig $phy up iwconfig $phy rate 5.5M fixed airbase-ng $phy -c 6 -P -C 60& sleep 5 ifconfig at0 10.0.0.1 netmask 255.255.255.0 up route add -net 10.0.0.0 netmask 255.255.255.0 gw 10.0.0.1 dhcpd -cf /etc/mana-toolkit/dhcpd.conf at0 echo '1' > /proc/sys/net/ipv4/ip_forward iptables --policy INPUT ACCEPT iptables --policy FORWARD ACCEPT iptables --policy OUTPUT ACCEPT iptables -F iptables -t nat -F iptables -t nat -A POSTROUTING -o $upstream -j MASQUERADE iptables -A FORWARD -i at0 -o $upstream -j ACCEPT so, you notice i have set rate to 5.5M fixed, from what i understand this will lighten the load (smaller chunks of data) with out this the usb device will dissconnect and reconnect do to (over-current) with out a lower fixed rate, a client will connect and when data is sent over that is to large you will then see over-current happen the script above works well with the old ugly wusb54g... so, i got my new alfa card and figured all should run with out a problem... after the alfa card is placed into monitor mode, this error shows when you attempt to set a fixed rate iwconfig wlan0 rate 5.5M fixed Sep 26 23:36:23 kali kernel: [ 5920.439195] ------------[ cut here ]------------ Sep 26 23:36:23 kali kernel: [ 5920.461808] WARNING: CPU: 0 PID: 4729 at net/mac80211/driver-ops.h:12 ieee80211_set_bitrate_mask+0x138/0x144 [mac80211]() Sep 26 23:36:23 kali kernel: [ 5920.491352] wlan0: Failed check-sdata-in-driver check, flags: 0x3 Sep 26 23:36:23 kali kernel: [ 5920.511385] Modules linked in: rt73usb rt2x00usb rt2x00lib ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables tun ipv6 evdev joydev dm_mod arc4 snd_soc_pcm512x snd_soc_wm8804 ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 rfkill snd_soc_bcm2708_i2s regmap_mmio snd_soc_core snd_compress regmap_i2c snd_pcm_dmaengine regmap_spi snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer leds_gpio led_class snd spi_bcm2708 i2c_bcm2708 Sep 26 23:36:23 kali kernel: [ 5920.586702] CPU: 0 PID: 4729 Comm: iwconfig Tainted: G W 3.12.26 #1 Sep 26 23:36:23 kali kernel: [ 5920.601828] [<c001450c>] (unwind_backtrace+0x0/0xec) from [<c00117f0>] (show_stack+0x10/0x14) Sep 26 23:36:23 kali kernel: [ 5920.619939] [<c00117f0>] (show_stack+0x10/0x14) from [<c001f98c>] (warn_slowpath_common+0x68/0x88) Sep 26 23:36:23 kali kernel: [ 5920.636405] [<c001f98c>] (warn_slowpath_common+0x68/0x88) from [<c001f9dc>] (warn_slowpath_fmt+0x30/0x40) Sep 26 23:36:23 kali kernel: [ 5920.655742] [<c001f9dc>] (warn_slowpath_fmt+0x30/0x40) from [<bf12cc48>] (ieee80211_set_bitrate_mask+0x138/0x144 [mac80211]) Sep 26 23:36:23 kali kernel: [ 5920.677358] [<bf12cc48>] (ieee80211_set_bitrate_mask+0x138/0x144 [mac80211]) from [<bf0f3f9c>] (cfg80211_wext_siwrate+0x128/0x17c [cfg80211]) Sep 26 23:36:23 kali kernel: [ 5920.699440] [<bf0f3f9c>] (cfg80211_wext_siwrate+0x128/0x17c [cfg80211]) from [<c0436f8c>] (ioctl_standard_call+0x60/0x474) Sep 26 23:36:23 kali kernel: [ 5920.718229] [<c0436f8c>] (ioctl_standard_call+0x60/0x474) from [<c0437538>] (wext_handle_ioctl+0x198/0x234) Sep 26 23:36:23 kali kernel: [ 5920.736694] [<c0437538>] (wext_handle_ioctl+0x198/0x234) from [<c03947c4>] (dev_ioctl+0x518/0x834) Sep 26 23:36:23 kali kernel: [ 5920.754231] [<c03947c4>] (dev_ioctl+0x518/0x834) from [<c00f6b88>] (do_vfs_ioctl+0x408/0x5f4) Sep 26 23:36:23 kali kernel: [ 5920.771443] [<c00f6b88>] (do_vfs_ioctl+0x408/0x5f4) from [<c00f6dac>] (SyS_ioctl+0x38/0x60) Sep 26 23:36:23 kali kernel: [ 5920.788322] [<c00f6dac>] (SyS_ioctl+0x38/0x60) from [<c000df80>] (ret_fast_syscall+0x0/0x30) Sep 26 23:36:23 kali kernel: [ 5920.806173] ---[ end trace dc57b6bd58a09bbf ]--- [B]#dissconnect[/B] Sep 26 23:37:34 kali kernel: [ 5991.874808] hub 1-1:1.0: over-current change on port 2 Sep 26 23:37:34 kali kernel: [ 5992.134019] usb 1-1.4: USB disconnect, device number 36 Sep 26 23:37:35 kali kernel: [ 5992.981972] usb 1-1.4: ath9k_htc: USB layer deinitialized Sep 26 23:37:36 kali kernel: [ 5993.251477] usb 1-1.4: new high-speed USB device number 38 using dwc_otg Sep 26 23:37:36 kali kernel: [ 5993.382818] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=9271 Sep 26 23:37:36 kali kernel: [ 5993.395969] usb 1-1.4: New USB device strings: Mfr=16, Product=32, SerialNumber=48 Sep 26 23:37:36 kali kernel: [ 5993.410376] usb 1-1.4: Product: UB91C Sep 26 23:37:36 kali kernel: [ 5993.420526] usb 1-1.4: Manufacturer: ATHEROS Sep 26 23:37:36 kali kernel: [ 5993.431422] usb 1-1.4: SerialNumber: 12345 Sep 26 23:37:36 kali kernel: [ 5993.453788] usb 1-1.4: ath9k_htc: Firmware htc_9271.fw requested Sep 26 23:37:36 kali kernel: [ 5993.478407] usb 1-1.2: USB disconnect, device number 33 Sep 26 23:37:36 kali kernel: [ 5993.763553] usb 1-1.4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 Sep 26 23:37:36 kali kernel: [ 5993.901552] usb 1-1.2: new full-speed USB device number 39 using dwc_otg Sep 26 23:37:36 kali kernel: [ 5994.008737] ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits Sep 26 23:37:36 kali kernel: [ 5994.028620] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b Sep 26 23:37:36 kali kernel: [ 5994.043904] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 26 23:37:36 kali kernel: [ 5994.058656] usb 1-1.2: Product: USB Receiver Sep 26 23:37:36 kali kernel: [ 5994.070618] usb 1-1.2: Manufacturer: Logitech Sep 26 23:37:36 kali kernel: [ 5994.110763] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input20 Sep 26 23:37:36 kali kernel: [ 5994.139661] hid-generic 0003:046D:C52B.001F: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input0 Sep 26 23:37:37 kali kernel: [ 5994.213364] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input21 Sep 26 23:37:37 kali kernel: [ 5994.249399] hid-generic 0003:046D:C52B.0020: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input1 Sep 26 23:37:37 kali kernel: [ 5994.301784] hid-generic 0003:046D:C52B.0021: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input2 Sep 26 23:37:37 kali kernel: [ 5994.571029] ath9k_htc 1-1.4:1.0: ath9k_htc: FW Version: 1.3 Sep 26 23:37:37 kali kernel: [ 5994.591476] ath: EEPROM regdomain: 0x833a Sep 26 23:37:37 kali kernel: [ 5994.591541] ath: EEPROM indicates we should expect a country code Sep 26 23:37:37 kali kernel: [ 5994.591570] ath: doing EEPROM country->regdmn map search Sep 26 23:37:37 kali kernel: [ 5994.591583] ath: country maps to regdmn code: 0x37 Sep 26 23:37:37 kali kernel: [ 5994.591627] ath: Country alpha2 being used: GB Sep 26 23:37:37 kali kernel: [ 5994.591641] ath: Regpair used: 0x37 Sep 26 23:37:37 kali kernel: [ 5994.608663] ieee80211 phy24: Atheros AR9271 Rev:1 with out lowering the rate. a client connects and when large data passes threw almost instatly the device is disconnected. So now since my new card suports master mode i get to test hostapd ,-) but almost the same symptoms exist /root/projects/mana/run-mana/start-nat-simple.sh ./start-nat-simple.sh So, the thing is up and running, the symptom is almost the same as i explain with airbase... my phone connects to this new access point, if i quickly refresh a webpage data begins to pass threw, i must click quickly or else dissconnect and reconnect happens with this slightly new error ath: phy24: Failed to wakeup in 500us Sep 26 23:50:10 kali kernel: [ 6747.690006] usb 1-1.4: USB disconnect, device number 38 Sep 26 23:50:11 kali kernel: [ 6748.954770] ath: phy24: Failed to wakeup in 500us Sep 26 23:50:11 kali kernel: [ 6748.975230] ath: phy24: Failed to wakeup in 500us Sep 26 23:50:11 kali kernel: [ 6749.112046] usb 1-1.4: ath9k_htc: USB layer deinitialized Sep 26 23:50:12 kali kernel: [ 6749.391495] usb 1-1.4: new high-speed USB device number 40 using dwc_otg Sep 26 23:50:12 kali kernel: [ 6749.522866] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=9271 Sep 26 23:50:12 kali kernel: [ 6749.535101] usb 1-1.4: New USB device strings: Mfr=16, Product=32, SerialNumber=48 Sep 26 23:50:12 kali kernel: [ 6749.548526] usb 1-1.4: Product: UB91C Sep 26 23:50:12 kali kernel: [ 6749.557935] usb 1-1.4: Manufacturer: ATHEROS Sep 26 23:50:12 kali kernel: [ 6749.567854] usb 1-1.4: SerialNumber: 12345 Sep 26 23:50:12 kali kernel: [ 6749.592176] usb 1-1.4: ath9k_htc: Firmware htc_9271.fw requested Sep 26 23:50:12 kali kernel: [ 6749.899058] usb 1-1.4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 Sep 26 23:50:12 kali kernel: [ 6750.144463] ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits Sep 26 23:50:13 kali kernel: [ 6750.583687] ath9k_htc 1-1.4:1.0: ath9k_htc: FW Version: 1.3 Sep 26 23:50:13 kali kernel: [ 6750.594294] ath: EEPROM regdomain: 0x833a Sep 26 23:50:13 kali kernel: [ 6750.594374] ath: EEPROM indicates we should expect a country code Sep 26 23:50:13 kali kernel: [ 6750.594405] ath: doing EEPROM country->regdmn map search Sep 26 23:50:13 kali kernel: [ 6750.594418] ath: country maps to regdmn code: 0x37 Sep 26 23:50:13 kali kernel: [ 6750.594463] ath: Country alpha2 being used: GB Sep 26 23:50:13 kali kernel: [ 6750.594478] ath: Regpair used: 0x37 Sep 26 23:50:13 kali kernel: [ 6750.616382] ieee80211 phy25: Atheros AR9271 Rev:1 can this wakeup script be disabled?

Iptables on the pineapple to kali

I did not watch the episode. But I will try to provide a quick set of instructions. once you have Wireshark up and running and you see data flowing, you can filter out specific traffic... http example try clicking on a specific packet, the bottom window you will see IP address and other specific information that you can filter through,in this window it's like a drop down menu continue to drop down until you find a specific string that you would like to filter. right click on the IP address and apply as filter, you can also right click the port number and click OR AND NOT SELECT using this right click method you can learn the filtering language. you could copy this string and paste into the command line with other applications

I did not watch the episode. But I will try to provide a quick set of instructions. once you have Wireshark up and running and you see data flowing, you can filter out specific traffic... http example try clicking on a specific packet, the bottom window you will see IP address and other specific information that you can filter through,in this window it's like a drop down menu continue to drop down until you find a specific string that you would like to filter. right click on the IP address and apply as filter, you can also right click the port number and click OR AND NOT SELECT using this right click method you can learn the filtering language. you could copy this string and paste into the command line with other applications

I do remember doing exactly what u said... but I feel that all the problems you will find, there is a cleaner way to handle this...Its all about success rate... lets say ettercap fails 30% of the time to provide clean content modification, a small proxy will get you closer to 95% successful and clean content (my testing years ago)

From my experience, I remember swapping data with ettercap, if the string size was larger then the original then the clients browser wwould not always provide the correct amount of data, for example the page source may be missing at the end </HTML> replace(12345, 1234567) Page may be missing L> </HTM

http://l33ttutorials.wordpress.com/2014/02/20/tutorial-man-in-the-middle-attack-using-sslstrip-and-arpspoofing-with-kali-linux/ Read this, vm installs or hd installs of kali may cause issues i guess Edit; Its just ettercaps ugly ways lol one day it works another day your like wtf... this frustration is why I wrote a proxy to do the data swap. . . Im sure its a small step you are missing... Arpspoof Dnsspoof And a proxy kungfoo replaces ettercap... Ettercap -T -q -f filter -M ARP // // Its been a few years since I used ettercap Edit;

When ettercap starts up. Does it say set the uid? And did you enable iptables in etter.conf ? Also test ur browser at a site that does not use https Msn Yaho Etc

Your ettercap config may need iptables enabled... idk maybe u have already done this Also u need to see plain text, accept-encoding rrplace wi. Azzept-encoding Idk maybe u leedt that part out of your post

100% reliable proxy written in your choice for the basic framework that suports https aswell, then each exploit could be a plugin If the GET request includes('*.exe') then launch the basic-plugin.rb for the swapping function that meets these if statements... mod the content length andd swap the data Plugins could be the language of your choice, simply handle the specific request and provide a response design for that exploit

http://pastebin.com/n7AHi5Ny it is a subject that needs more work, you need a payload to cover all situations... I have spent some long hours working on this subject and could provide help

can you test this inside the local network... don't involve the router and port forwarding just yet... when I run into these kinds of problems ill start my test with netcat to duplicate the task with hi world examples... You have one machine(192.168.0.101) listening on a port that provides console access nc -l -p 22 And machine two(192.168.0.102) connecting to the first machine with intentions of using the console service Nc 192.168.0.102 22 And then test that the connection works by typing 'hi world from machine2' At this point you know that anything can now be accomplished threw this tcp stream... so you want a connect back? your machine 1 connects to machine 2 on port 3333 and slides in the data existing on port 22? I can help you recreate this, at the moment I'm away from my puters So if you interested, look online for ssh pipe with netcat. I have found better luck with pipes abd nc