Marzster Posted March 8, 2018 Share Posted March 8, 2018 Hey Got my new NaNo. download .wp6.sh and ran it. all settings seem fine, but won't connect, just get a screen of full stops. Running on kali-linux-2018.1-vbox-amd64 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 08:00:27:59:1b:51 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.42.42 netmask 255.255.255.0 broadcast 172.16.42.255 inet6 fe80::a00:27ff:feb8:d99f prefixlen 64 scopeid 0x20<link> ether 08:00:27:b8:d9:9f txqueuelen 1000 (Ethernet) RX packets 4 bytes 930 (930.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 22 bytes 1855 (1.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 20 bytes 1116 (1.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 20 bytes 1116 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 then when try to connect, its full stops Step 3 of 3: Select WiFi Pineapple Interface Please connect the WiFi Pineapple to this computer. ................................................... ................................................... ................................................... ..................... Cannot connect through web interface either Unable to connect Firefox can’t establish a connection to the server at 172.16.42.1:1471. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer’s network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Any one else encounter this, or any advice. Link to comment Share on other sites More sharing options...
[N] Posted April 12, 2018 Share Posted April 12, 2018 If you reboot kali and restart the Nano, can you connect without running the wp6.sh script? Link to comment Share on other sites More sharing options...
Marzster Posted April 17, 2018 Author Share Posted April 17, 2018 that doesn't work, I can't even ping the nano. But when connected the light goes solid blue. I cannot ping from Kali or even the MAC terminal. Contacted help desk, they just said install USB on Kali, which I already have, I told them it is installed, issue seems to be hardware as I can't even Ping the box. I guess they get many people with issues and think NOOBS. But my friend has a nano and worked for him out of box and he had a looked and said all setup correctly should work. Link to comment Share on other sites More sharing options...
Just_a_User Posted April 17, 2018 Share Posted April 17, 2018 16 minutes ago, Marzster said: that doesn't work, I can't even ping the nano. But when connected the light goes solid blue. I cannot ping from Kali or even the MAC terminal. Are you running this in a VM? have you tried from the hostOS directly? just to rule out VM/USB sharing issues. Link to comment Share on other sites More sharing options...
Marzster Posted April 25, 2018 Author Share Posted April 25, 2018 Yes ran from MAC terminal, cannot ping Link to comment Share on other sites More sharing options...
Eliprof2014 Posted May 8, 2018 Share Posted May 8, 2018 If the wp6.sh program asks you to connect your Wifi Pineapple to your computer, disconnect your Wifi Pineapple with the USB menu in your VM and then after 2 seconds connect it back. Link to comment Share on other sites More sharing options...
Zech15 Posted May 25, 2018 Share Posted May 25, 2018 I am having the same problem have you found a fix?? Link to comment Share on other sites More sharing options...
Domain0@engineer.com Posted June 20, 2018 Share Posted June 20, 2018 Same problems here, tried all the so called, fixes, workarounds, ip table fixes debian 9 sharing blog fixes, kali linux fixes; attempted this on Parrot Security, Debian 9, fresh install of kali linux, wont waste any more time attempting on a windows box. I have a device I cant even use as a paperweight. Reset the device to factory tried again and no dice. Its apparently just dumb luck if you buy one and it actually works. I'll go back to using usb adapters and wifi pumpkin. this has been a complete waste of time and effort on a device which is quite short of the mark.. will no longer connect through android either. simply seems if its configured on one platform it won't operate with the other. this is not a plug and play or configurable device, its just a 50% shot in the dark. worst thing I've ever encountered Link to comment Share on other sites More sharing options...
Just_a_User Posted June 20, 2018 Share Posted June 20, 2018 1 hour ago, Domain0@engineer.com said: this is not a plug and play or configurable device, its just a 50% shot in the dark Not true, what have you tried? how can i help you? On 5/25/2018 at 9:03 PM, Zech15 said: I am having the same problem have you found a fix?? What issues are you having? what have you tried? How can i help? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.