Sebkinne Posted February 8, 2013 Posted February 8, 2013 Hey everyone, There seems to be an issue with usb-modeswitch on the 2.7.5 firmware. To debug it further though, we need a bit of help from you guys. Anyone that has a 3G modem and is on 2.7.5, could you try to make a connection and report back if it works or not? Anyone that has a 3G modem and is willing to help and is not on 2.7.5, could you upgrade and see if it works? Best Regards, Sebkinne
kevambert Posted February 8, 2013 Posted February 8, 2013 No its not working for me Huawei modem, (the micro SD inside mounts to usb ok) root@Pineapple:/pineapple/3g# ./3g.shSearching for attached 3G Modems12d1:140c 1d6b:0002Huawei Modem (3-IRL) detected. Attempting mode switchusb_modeswitch: can't load library 'libusb-0.1.so.4'./3g.sh: line 61: /etc/init.d/firewall: not found./3g.sh: line 61: /etc/init.d/firewall: not foundroot@Pineapple:/pineapple/3g#
Sebkinne Posted February 8, 2013 Author Posted February 8, 2013 Ah, that is great! Well, it isn't but now we know the library we are missing.. Please keep the reports coming!
knotworx Posted February 8, 2013 Posted February 8, 2013 Just dusted my Pineapple off today to try it out with a USB 3g dongle - first thing I did was update the firmware to 2.7.5. After about an hour of futzing around with the config I went into the shell and ran the usb_modeswitch directly. This is what I got: usb_modeswitch: can't load library 'libusb-0.1.so.4'. Hope that helps! knotworx
webdirector Posted February 9, 2013 Posted February 9, 2013 Hi my Huawei E173 does not work anymore. here the log: 00:54:31 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:30 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:30 Pineapple kern.notice kernel: [ 3270.540000] sd 51:0:0:0: [sda] Attached SCSI removable disk00:54:30 Pineapple kern.notice kernel: [ 3270.520000] sd 51:0:0:0: Attached scsi generic sg1 type 000:54:30Pineapple kern.notice kernel: [ 3270.520000] scsi 51:0:0:0:Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 200:54:30Pineapple kern.notice kernel: [ 3270.500000] scsi 50:0:0:0: CD-ROMHUAWEI Mass Storage 2.31 PQ: 0 ANSI: 200:54:30 Pineapple kern.notice kernel: [ 3270.500000] scsi 50:0:0:0: Attached scsi generic sg0 type 500:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:1446 for mode switching00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?00:54:29 Pineapple kern.info kernel: [ 3269.520000] scsi51 : usb-storage 1-1:1.100:54:29 Pineapple kern.info kernel: [ 3269.500000] scsi50 : usb-storage 1-1:1.000:54:29 Pineapple kern.info kernel: [ 3269.350000] usb 1-1: new high-speed USB device number 27 using ehci-platform00:54:25 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=? Product=? Serial=?00:54:25 Pineapple kern.info kernel: [ 3265.200000] usb 1-1: USB disconnect, device number 2600:54:24 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:23 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:22 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:21 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:20 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:19 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed00:54:19 Pineapple kern.notice kernel: [ 3259.310000] sd 49:0:0:0: [sda] Attached SCSI removable disk00:54:19 Pineapple kern.notice kernel: [ 3259.300000] sd 49:0:0:0: Attached scsi generic sg1 type 000:54:19Pineapple kern.notice kernel: [ 3259.290000] scsi 49:0:0:0:Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
Sebkinne Posted February 10, 2013 Author Posted February 10, 2013 Thanks for the reports! The issue was fixed in 2.7.6.
Recommended Posts