jus7incase Posted January 31, 2013 Share Posted January 31, 2013 (edited) Install does not work MK4 under 2.7.0, usb with 2G swap Displays MITM installing.... forever. When going back to he back later it still shows the install link. What's wrong? TIA JC Edited January 31, 2013 by jus7incase Quote Link to comment Share on other sites More sharing options...
chownsauce Posted January 31, 2013 Share Posted January 31, 2013 Install does not work MK4 under 2.7.0, usb with 2G swap Displays MITM installing.... forever. When going back to he back later it still shows the install link. What's wrong? TIA JC Did you watch the Pineapple to see if it had rebooted itself during the install? It may require a larger swap partition if so. You can also check the uptime of it on the "Resources" page in a separate tab to see if it rebooted during the installation which it's not supposed to do. Quote Link to comment Share on other sites More sharing options...
jus7incase Posted January 31, 2013 Share Posted January 31, 2013 Did you watch the Pineapple to see if it had rebooted itself during the install? It may require a larger swap partition if so. You can also check the uptime of it on the "Resources" page in a separate tab to see if it rebooted during the installation which it's not supposed to do. Thanks, that was not the problem. 2G swap is enough. I apparently did just not wait long enough for the build to complete. I did a comeplte reinstall of everything and now it installed ok. Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted January 31, 2013 Author Share Posted January 31, 2013 Yeah, takes quite a long time to install I know :P Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 6, 2013 Share Posted February 6, 2013 Hi, I have succesfully installed the MITM module to USB on my Pinapple, but cannot get it to run. When I select a script and push the start button, I get "Proxy is not running...". What am I doing wrong here? Thanks for your help!! Quote Link to comment Share on other sites More sharing options...
chownsauce Posted February 6, 2013 Share Posted February 6, 2013 Does it show it as being installed on the MITM page? Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 6, 2013 Share Posted February 6, 2013 Yes, the Proxy is installed. When I click 'start' the status changes to 'enabled' and stays that way. In the status window below, when I click refresh it says the Proxy is not running (in white text) after 1 second. When I refresh the page, the Proxy status at the top is back to disabled. Quote Link to comment Share on other sites More sharing options...
khaotic57 Posted February 6, 2013 Share Posted February 6, 2013 What verison are you running? I found that it best works on 2.7.0 Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 6, 2013 Share Posted February 6, 2013 What verison are you running? I found that it best works on 2.7.0 I have upgraded everything to 2.7.0 before installing the MitM module.... Is there any form of logging that I can check other than the generic system log? There is nothing in there that indicates a problem. (I am relatively new to Pineapple) Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted February 6, 2013 Share Posted February 6, 2013 Seems like the script to start the proxy isn't starting. Make sure the script has execute permissions (chmod +x). something higher. Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 6, 2013 Share Posted February 6, 2013 (edited) Seems like the script to start the proxy isn't starting. Make sure the script has execute permissions (chmod +x). I would suggest you re-install the module to check if that fixes is. I have reinstalled 3x already, no change. I also added +x to all .py scripts. mitm-actions.php seems to call mitmdump, but I cannot find it anywhere (?) More info: - WAN port connected to my (NATed) network - LAN port not connected - Wifi is active, Karma disabled - Pineapple can find the public IP of the network - I can ping to a public server from the pineapple - I can connect my laptop to the Pineapple wifi AP - I cannot browse anything from my laptop (laptop -> wifi -> pineapple -> wan -> microsoft.com) So it seems I do not have basic passthrough connectivity from LAN to WAN... what could be wrong? UPDATE: Random roll seems to work OK Edited February 6, 2013 by DarkRaver Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted February 6, 2013 Share Posted February 6, 2013 I am guessing it is a .sh script that needs +x-ing. Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 6, 2013 Share Posted February 6, 2013 I am guessing it is a .sh script that needs +x-ing. I cant seem to find it anyhwere.. starting to wonder if it has been installed Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted February 6, 2013 Author Share Posted February 6, 2013 Can you try: which mitmdump If it returns nothing, then the proxy itself is not installed. To start the install process again, run: rm -rf /usb/modules/mitm/installed and reload the module page. Be sure to have a working internet access to download all the necessary packages. Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted February 8, 2013 Author Share Posted February 8, 2013 v1.3 is out with minor fix. Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 8, 2013 Share Posted February 8, 2013 Thanks. Will try that tonight, hope it solves my problem.... The Proxy IS installed but does not run. Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 9, 2013 Share Posted February 9, 2013 Unfortunally, mitm still wont run. I am getting very frustrated and disappointed with the pineapple. Both a friend and myself cannot get our pineapples to do any form of mitm apart from randomroll and dnsspoof. If this device wont do mitm out of the box like the ads implies, this has been a waste of money and time... [/frustrated rambling off ;-)] Has anyone gotten this to work? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted February 9, 2013 Share Posted February 9, 2013 Unfortunally, mitm still wont run. I am getting very frustrated and disappointed with the pineapple. Both a friend and myself cannot get our pineapples to do any form of mitm apart from randomroll and dnsspoof. If this device wont do mitm out of the box like the ads implies, this has been a waste of money and time... [/frustrated rambling off ;-)] Has anyone gotten this to work? Well, the pineapple does MITM. This module is just an addon... Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 9, 2013 Share Posted February 9, 2013 Well, the pineapple does MITM. This module is just an addon... Yeah sorry did not want to offend anyone or anything. Just very frustrated at the pineapple and/or my own incompetence after 2 weeks of failing to do MitM.... I managed to set up a connection: VICTIM-PC --> WIFI --> Pineapple --> LAN --> WIN7-ATTACK-PC --> WIFI --> INTERNET But I am getting more and more confused. The documentation is not very elaborate on how to do MitM with the pineapple... 1. Which steps should I take to capture traffic using the pineapple? (or even inject scripts, java, etc). 2. Should I run backtrack on the laptop, or something else? 3. Do I need the ATTACK-PC for this, or could I run the pineapple as a standalone device (big advantage when pentesting) Any help to get the next step working by any of the Pineapple-Gurus would be greatly appreciated!! Thanky in advance guys. Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted February 9, 2013 Share Posted February 9, 2013 No worries ;) 1. TCPdump is one great example. 2. Nope, but a linux environment is preferable. 3. No, the pineapple can run in stand alone mode. To supply internet to clients though, it needs either 3G, wifi or ethernet. Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 9, 2013 Share Posted February 9, 2013 No worries ;) 1. TCPdump is one great example. 2. Nope, but a linux environment is preferable. 3. No, the pineapple can run in stand alone mode. To supply internet to clients though, it needs either 3G, wifi or ethernet. Thank you!! Finally got the picture. I can definitely get TCPdump to capture the packages going through the Pineapple. The dump files are already sitting on my USB drive. Ideally, I would like to use the pinapple standalone with an Alpha USB Wifi device or the WAN port. I found the IPtables commands for WAN on the wiki. 1. What is the recommended setup to do live sniffing (capturing tokens, cookies, credentials, images) from a remote workstation? 2. What is the best way to inject exploits in a web session on the Pineapple? Is there a proxy that supports this for Pineapple? Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 10, 2013 Share Posted February 10, 2013 By the way, it seems the problem is not with the MitM module failing: TCPdump works, but it looks like multiple modules fail to start: MitM proxy is not running... sslstrip is not running... Occupineapple is not running... Any thoughts? Quote Link to comment Share on other sites More sharing options...
khaotic57 Posted February 10, 2013 Share Posted February 10, 2013 I have run into the same issue before. I found that it had to to with my swap partition or usb was not set up correctly. I reflashed my pineapple, deleted everything on my usb drive from win scp then set usb up correctly and it solved those issues. Quote Link to comment Share on other sites More sharing options...
DarkRaver Posted February 10, 2013 Share Posted February 10, 2013 Ok I have reflashed the pineapple again and wiped & reinstalled the usb key. Everything seems ok now! Thank you soooo much!!!! I am one happy bunny now! :-) My only question remaining is how to do live sniffing and injection from a remote pentest workstation. Any ideas? Quote Link to comment Share on other sites More sharing options...
khaotic57 Posted February 10, 2013 Share Posted February 10, 2013 Glad to help. I have been able to do sniffing with wireshark through my computer that the pineapple is hooked up to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.