toddmurray Posted November 12, 2012 Share Posted November 12, 2012 I'm running 2.7.0 on a Mark IV Decided to try the Wifi Relay. I installed the networkmanager module Powered up the pineapple, attached the Alpha AWUA036H via USB. Next I ran ifconfig wlan1 up, to enable the Alpha, as it was down. Then I went to the networkmanager module and there was my WLAN1 interface ready for the client configuration. The WLAN1 was configured to join my home network, and it did authenticate but never got an ip. I tried manually giving it an ip and default gateway and could then ping google, but that lasted all of 20 seconds and ip disappeared from my wlan1 interface. Does any one have any working step by step instructions to get this working? Thanks for reading. Todd Quote Link to comment Share on other sites More sharing options...
technocrat Posted November 12, 2012 Share Posted November 12, 2012 This post may help you: Also, I have changed my pineapple's default configuration for wlan1 to startup in client (station, sta) mode. http://wiki.openwrt.org/doc/uci/wireless Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted November 13, 2012 Share Posted November 13, 2012 Not a bug - at least not one that belongs here. Moved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.