inquisitive Posted May 13, 2010 Share Posted May 13, 2010 hi, i have just bought a Fon and the firmware version is 0.7.0 r2 do i need to downgrade this in order to put jasager on really hope you can help thanks Quote Link to comment Share on other sites More sharing options...
digininja Posted May 13, 2010 Share Posted May 13, 2010 See if you can flash it with either redboot or one of the windows apps first and if you can't then you'll need to start messing. Quote Link to comment Share on other sites More sharing options...
inquisitive Posted May 13, 2010 Author Share Posted May 13, 2010 See if you can flash it with either redboot or one of the windows apps first and if you can't then you'll need to start messing. thanks for the reply, this would be my first time flashing a router do you have any guides i could follow to do this? i have read on the ddwrt wiki page that i have to mount a serial adapter to the fonera is this true? would really appriciate any advice you could give me thanks Quote Link to comment Share on other sites More sharing options...
digininja Posted May 14, 2010 Share Posted May 14, 2010 There are loads of howtos in the forums and wiki. Assuming you are using windows just fire up freifunk and fill in the fields. Quote Link to comment Share on other sites More sharing options...
inquisitive Posted May 14, 2010 Author Share Posted May 14, 2010 (edited) There are loads of howtos in the forums and wiki. Assuming you are using windows just fire up freifunk and fill in the fields. hi, i did what you said and i get the results from Freifunk: stderr:Non arp received make sure, the device is connected directly perr MAC: 00:18:84:11:7f:d8 peer IP: 0.0.0.0 stderr:Telnet for redboot not enabled i am pluged in with ethernet cable my NIC is set to dhcp and the defualt ip address of my fon is 192.168.10.1 not sure what im doing wrong Edited May 14, 2010 by inquisitive Quote Link to comment Share on other sites More sharing options...
proxy Posted May 14, 2010 Share Posted May 14, 2010 Hey did you have any luck with your fon I to just got mine and it is loaded with 0.7.0 r2 looking for any insight/help. Did you have to use the serial connector or were you able to get it done a different way. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
inquisitive Posted May 14, 2010 Author Share Posted May 14, 2010 Hey did you have any luck with your fon I to just got mine and it is loaded with 0.7.0 r2 looking for any insight/help. Did you have to use the serial connector or were you able to get it done a different way. Thanks in advance. hi, i haven't done much more on it. i have done some reading and instead of using a serial connection you can ssh into the fon and do it that way. i am going to try it later ill let you know how it goes Quote Link to comment Share on other sites More sharing options...
fearanphoist Posted May 11, 2011 Share Posted May 11, 2011 did you manage to fix this , i am having that issue at the minute ..........stderr:Non arp received make sure, the device is connected directly i had been able to flash it a few times already so i had the right setup now it wont do it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.