:blink:I have just got the custom firmware with jasager up and going. The only issue that i seam to be facing is that every time I start karma is dies. I hit the refresh on my jasager web interface and it shows karma as off. Also when I have karma on it is not actually working (on my test machine everything looks normal as far as the SSIDs showing available. Also I show a open wrt SSID in the list. I had some issues flashing the fon using the ap51-flash-fonera-gui-1.0-38 it looked like it was trying to flash my wifi interface base on the MAC address shown. I ended up having to flash open wrt using redboot interface via telnet to 192.168.1.254 port 9000. I followed this guide for setup (except for the redboot firmware flashing part for that I used http://wiki.openwrt.org/toh/fon/fonera#ins...rt.with.redboot
substituting the openwrt-atheros-2.6-vmlinux.lzma and the openwrt-atheros-2.6-root.squashfs where it called for. Below is my session starting after the openwrt firmware. Any help would be greatly appreciated and thanks in advance.
=== IMPORTANT ============================
Use 'passwd' to set your login password
this will disable telnet and enable SSH
-----------------------------------------
BusyBox v1.4.2 (2007-09-29 07:21:40 CEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (7.09) -----------------------------------
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
---------------------------------------------------
root@OpenWrt:/# passwd
Changing password for root
New password:
Bad password: too weak
Retype password:
Password for root changed by root
root@OpenWrt:/# passwd
Changing password for root
New password:
Retype password:
Password for root changed by root
root@OpenWrt:/# uci set wireless.wifi0.disabled=0
root@OpenWrt:/# uci commit wireless && wifi
root@OpenWrt:/# cd /tmp/
root@OpenWrt:~# ipkg install haserl_0.8.0-2_mips.ipk
Installing haserl (0.8.0-2) to root...
Configuring haserl
Done.
root@OpenWrt:~# ipkg install webif_0.3-10_mips.ipk
Installing webif (0.3-10) to root...
Configuring webif
Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown
Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown
system type : Atheros AR2315
Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown
Downloading http://downloads.openwrt.org/kamikaze/7.09...6/packages/Pack
ages
wget: bad address 'downloads.openwrt.org'
Downloading http://downloads.openwrt.org/kamikaze/packages/mips/Packages
wget: bad address 'downloads.openwrt.org'
Downloading http://downloads.x-wrt.org/xwrt/kamikaze/7...-2.6/packages/P
ackages
wget: bad address 'downloads.x-wrt.org'
An error ocurred, return value: 3.
Collected errors:
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp
-q -P /tmp/ipkg-vywPZM http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/p
ackages/Packages'
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp
-q -P /tmp/ipkg-vywPZM http://downloads.openwrt.org/kamikaze/packages/mips/Pack
ages'
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp
-q -P /tmp/ipkg-vywPZM http://downloads.x-wrt.org/xwrt/kamikaze/7.09/atheros-2.
6/packages/Packages'
Committing new firmware id ...
Device: La Fonera (ACCTON MR3201A)
Committing new device id ...
SUCCESS! Webif^2 installation appears OK. Welcome to X-Wrt!
You may need to do a hard REFRESH to clear old CSS style from your browser.
Reinitializing httpd ...
Done.
root@OpenWrt:~# ipkg install libruby_1.8.6-p36-1_mips.ipk
Installing libruby (1.8.6-p36-1) to root...
Configuring libruby
Done.
root@OpenWrt:~# ipkg install ruby_1.8.6-p36-1_mips.ipk
Installing ruby (1.8.6-p36-1) to root...
Configuring ruby
Done.
root@OpenWrt:~# ipkg install ruby-core_1.8.6-p36-1_mips.ipk
Installing ruby-core (1.8.6-p36-1) to root...
Configuring ruby-core
Done.
root@OpenWrt:~# ipkg install ruby-rexml_1.8.6-p36-1_mips.ipk
Installing ruby-rexml (1.8.6-p36-1) to root...
Configuring ruby-rexml
Done.
root@OpenWrt:~# ipkg install jasager-madwifi_1.ipk
Installing kmod-madwifi (2.6.21.5+r2568-20070710-atheros-2) to root...
Configuring kmod-madwifi
Done.
root@OpenWrt:~# ipkg install kmod-gpio_2.6.21.5-atheros-1_mips.ipk
Installing kmod-gpio (2.6.21.5-atheros-1) to root...
Configuring kmod-gpio
Done.
root@OpenWrt:~# ipkg install jasager_2.1.ipk
Installing jasager (2) to root...
Configuring jasager
Install finished, testing that it worked ok
SUCCESS! Jasager installation appears OK. Welcome to Jasager!
To view the web interface please visit http://<fon>:1471/
Stopping any currently running Jasager sessions
killall: tail: no process killed
killall: logwatch: no process killed
Starting Jasager