proxy

:blink:I have just got the custom firmware with jasager up and going. The only issue that i seam to be facing is that every time I start karma is dies. I hit the refresh on my jasager web interface and it shows karma as off. Also when I have karma on it is not actually working (on my test machine everything looks normal as far as the SSIDs showing available. Also I show a open wrt SSID in the list. I had some issues flashing the fon using the ap51-flash-fonera-gui-1.0-38 it looked like it was trying to flash my wifi interface base on the MAC address shown. I ended up having to flash open wrt using redboot interface via telnet to 192.168.1.254 port 9000. I followed this guide for setup (except for the redboot firmware flashing part for that I used http://wiki.openwrt.org/toh/fon/fonera#ins...rt.with.redboot substituting the openwrt-atheros-2.6-vmlinux.lzma and the openwrt-atheros-2.6-root.squashfs where it called for. Below is my session starting after the openwrt firmware. Any help would be greatly appreciated and thanks in advance. === IMPORTANT ============================ Use 'passwd' to set your login password this will disable telnet and enable SSH ----------------------------------------- BusyBox v1.4.2 (2007-09-29 07:21:40 CEST) Built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M KAMIKAZE (7.09) ----------------------------------- * 10 oz Vodka Shake well with ice and strain * 10 oz Triple sec mixture into 10 shot glasses. * 10 oz lime juice Salute! --------------------------------------------------- root@OpenWrt:/# passwd Changing password for root New password: Bad password: too weak Retype password: Password for root changed by root root@OpenWrt:/# passwd Changing password for root New password: Retype password: Password for root changed by root root@OpenWrt:/# uci set wireless.wifi0.disabled=0 root@OpenWrt:/# uci commit wireless && wifi root@OpenWrt:/# cd /tmp/ root@OpenWrt:~# ipkg install haserl_0.8.0-2_mips.ipk Installing haserl (0.8.0-2) to root... Configuring haserl Done. root@OpenWrt:~# ipkg install webif_0.3-10_mips.ipk Installing webif (0.3-10) to root... Configuring webif Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown system type : Atheros AR2315 Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown Downloading http://downloads.openwrt.org/kamikaze/7.09...6/packages/Pack ages wget: bad address 'downloads.openwrt.org' Downloading http://downloads.openwrt.org/kamikaze/packages/mips/Packages wget: bad address 'downloads.openwrt.org' Downloading http://downloads.x-wrt.org/xwrt/kamikaze/7...-2.6/packages/P ackages wget: bad address 'downloads.x-wrt.org' An error ocurred, return value: 3. Collected errors: ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-vywPZM http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/p ackages/Packages' ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-vywPZM http://downloads.openwrt.org/kamikaze/packages/mips/Pack ages' ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-vywPZM http://downloads.x-wrt.org/xwrt/kamikaze/7.09/atheros-2. 6/packages/Packages' Committing new firmware id ... Device: La Fonera (ACCTON MR3201A) Committing new device id ... SUCCESS! Webif^2 installation appears OK. Welcome to X-Wrt! You may need to do a hard REFRESH to clear old CSS style from your browser. Reinitializing httpd ... Done. root@OpenWrt:~# ipkg install libruby_1.8.6-p36-1_mips.ipk Installing libruby (1.8.6-p36-1) to root... Configuring libruby Done. root@OpenWrt:~# ipkg install ruby_1.8.6-p36-1_mips.ipk Installing ruby (1.8.6-p36-1) to root... Configuring ruby Done. root@OpenWrt:~# ipkg install ruby-core_1.8.6-p36-1_mips.ipk Installing ruby-core (1.8.6-p36-1) to root... Configuring ruby-core Done. root@OpenWrt:~# ipkg install ruby-rexml_1.8.6-p36-1_mips.ipk Installing ruby-rexml (1.8.6-p36-1) to root... Configuring ruby-rexml Done. root@OpenWrt:~# ipkg install jasager-madwifi_1.ipk Installing kmod-madwifi (2.6.21.5+r2568-20070710-atheros-2) to root... Configuring kmod-madwifi Done. root@OpenWrt:~# ipkg install kmod-gpio_2.6.21.5-atheros-1_mips.ipk Installing kmod-gpio (2.6.21.5-atheros-1) to root... Configuring kmod-gpio Done. root@OpenWrt:~# ipkg install jasager_2.1.ipk Installing jasager (2) to root... Configuring jasager Install finished, testing that it worked ok SUCCESS! Jasager installation appears OK. Welcome to Jasager! To view the web interface please visit http://<fon>:1471/ Stopping any currently running Jasager sessions killall: tail: no process killed killall: logwatch: no process killed Starting Jasager

Hey did you have any luck with your fon I to just got mine and it is loaded with 0.7.0 r2 looking for any insight/help. Did you have to use the serial connector or were you able to get it done a different way. Thanks in advance.

Hey just got my fon2100 and it is running firmware version: 0.7.0 r2. In the install guide for jasager it says that it needs to be 0.7.0 r1 or below. Looking for a clear way to downgrade this fon to a suitable version. I have been reading on http://stefans.datenbruch.de/lafonera/ about using a perl script grammofon.pl on a 0.7.0 r4. It this the best way to do the downgrade also is there a way to do it under windows. Thanks for any help in advance.