Jump to content

BrainEater

Active Members
  • Content Count

    35
  • Joined

  • Last visited

  • Days Won

    2

About BrainEater

  • Rank
    Hak5 Fan +

Contact Methods

  • AIM
    Here to learn and help where I can.

Profile Information

  • Gender
    Male
  • Location
    Australia
  • Interests
    USB Rubber Ducky, WiFi Pineapple, Bash Bunny, LAN Turtle, Powershell, Linux, Windows command line, Raspberry pi 's, arduino' s.

Recent Profile Visitors

766 profile views
  1. Ok. So this is great I'm currently at work but when I get home I will try out those commands and see if the ip tables can fix my issue thanks so much mate. This has been bugging be for 3 days now and I'm scratching my head.
  2. Yeah mate that's it, the only other thing is there is another computer on my LAN between the openvpn server and the Nord server as a Nord client. Sorry if I didn't explain myself to well.
  3. I have a feeling I need to do something like this. # Create an alternate routing table echo "1 NOVPN" >> /etc/iproute2/rt_tables # Create the routes for this table # Actually, you just want to set the default gateway ip route add default via 192.168.1.1 dev eth0 table NOVPN # Check results with ip route show table NOVPN # Now tell the kernel that this routing table should be used when # a packet waiting to be routed has a specific "mark" ip rule add from all fwmark 0x1 lookup NOVPN # Then mark all the required packets with the same mark use above iptables -t mangle -I OUTPUT -p
  4. I have done that, that's how I had it working external before I changed the gateway to run it through the second vpn. But I believe there is an issue with port forward the server because the gateway is on another server again so the traffic passes through another server, another gateway (the one I changed it to) , a different port and then finally to the PiVPN server. So the port can't be forwarded to the PiVPN server as that's no technical where the traffic is. I need a way to have the client respond back through the current gateway then to the PiVPN server. Or for some bright spark to come
  5. So I really need help, I though I had everything squared up and ready but I tried to connected externally this afternoon and found a large hole in my plan (a little cranky) . I have everything working great but external access to my OpenVPN server. For more information please read the below link https://forums.hak5.org/index.php?/topi ... vpn-build/ Long story short I need to access my server from outside the network. The setup is my open VPN server on a raspberry pi running raspbian which is on local ip 10.1.1.101 and I run all of its traffic through another raspberry pi configured as
  6. So I have been working on this Server/VPN project for about a month now and I'm supper happy i finally have everything together, setup and boxed up. A quick rundown on what is in there and what i have done. The top black box is clearly just my router and the bottom hosing is an electronic project box i picked up for my local electronics store (Jaycar). The actual internals consist of 3 raspberry pi 3's, a TP 5 port switch which i removed the housing from as the board by itself takes up significantly less room, a 70 watt powered USB hub to power the pi's, 3 micro USB power cables, 3 cat 5
  7. Another down side to the arduino that I forgot to mention, is that as soon as you plug it in to edit or change the script it will run on the host computer.
  8. Sorry if this is long but I use both arduino boards and the usb rubber ducky so I will explain. The arduino's are good for a few reason but have there faults as well, so before I even start I honestly would recommend the duck and 1 or more arduino. Arduino Pros/From my experience (depending on the arduino board, it will input more keystrokes per-second then the ducky. It is much cheaper (inexpensive) being able to buy a case, the board and a usb/micro usb adapter (depending on the board) all for under $10. Marking it more viable from a plug and run situation because you are only l
  9. From what I have seen (although I haven't really looked) I haven't seen many Android palyloads apart from the odd one here and there (check YouTube I have found a few there). But to answer your others question, I have been teaching myself powershell as well and there are loads of tutorials online. But the easiest way I have found is to write up a draft for a payload and script out everything but the powershell section. Lay it out and figure out what you what to achieve and what order it needs to happen it. Then Google, lines of powershell commands that with achieve what you wh
  10. I don't see why they would pull the post. The Hak5 team is pritty good like that, there all about the tech and new ways on doing things and this forum is really good for tips and projects. It's not a replacement for the Bash Bunny it's just a cheap tool that can be disposed of. I do the same thing with the Rubber Ducky. I use the actually product all the time but I preload scripts on to arduino's too. Leave them at friends house and make my life easier. Instead of always reloading scripts or teaching my friends or family how to set up a shell so I can fix there shit, all they have to do is plu
  11. @illwill WhIle I'm here I will thank you for your input, it's interesting to see how powershell has change over the year but at the core it's still the same today as it was when it first come out. They have just added a few little commands to make life easier. Your adjustments work great and worked on every version of powershell. I'll give you some mad props in my REM and from now on try to code at the most basic level of powershell because its upwards compatible.
  12. That's fine mate and don't be sorry I'm happy to help when I can I'm only new to all this as well. So the issue your having is really simple and it's not your computer or the script. If you are using the duck encoder on the website duckytoolbox it's an issue with the encoder. I have had the exact same problem when encoding anything more then a simple script. The easy fix is just to download the Java script encode (or the whole duck toolkit)from Darren's github page and encode it on your computer with that. It's upto date and from what I believe te website is no longer maintain.
  13. I can certainly try @index Can I ask the name of the usb flash drive that you used (ie the name you have given to the drive) or what you named the mass storage of the twin duck that you used? This code has to be used with the rubber ducky flash with the twin duck firmware or the standard duck (or arduino) with a second usb drive plugged in as well (as it needs somewhere to store the output file) . The way I have written the code (stolen it from Darren) the usb or duck has to be named @ (just simply the at sign "@" and nothing else). You can of course change this just by changing the @ s
  14. I have to agree with @Rkiver I've only been doing this for 3 months and officially on the forum for a month and I have found that self teaching is the way to go, so I'm only new to this as well. Find something that interests you and start there. For instance every one says start with phython but I haven't even written 1 python script yet. I have however been learning Powershell for ducky script and I have learnt so much it's not funny, Powershell is extremely powerfull. I have also been learning networking and html. Just pick something you can see yourself using and start researching that.
×
×
  • Create New...