Archer322

You were absolutely right i reflashed and reformatted the sd card and it's working fine now i installed the ap locator module (i can't remember what it's called atm) to the sd card and for some reason it was eating up memory like crazy after the wipe the module is working normally again though

So I'm having a problem I've never encountered before with my nano for the first hour and 29 minutes everything works perfectly but as soon as the 30 minute mark hits without fail the nano locks up first wlan1 goes down and the entire interface stops responding then wlan0 goes down and the indicator light goes a pale green and I've tried a soft and hard reset and the hard reset works... until that 1 hour and 30 minutes of up time and the problem repeats if anyone has any ideas as to what might be the problem i could use a little help

Hey guys I was wondering what happened to the wifi birdhouse project back in the mkv days one day it was the next big thing and then nothing I have a bet with one of my friends that this would be perfect for and I wasn't sure how it was setup or if anything ever came of it did the hak5 firehouse get a ominous phone call or something? If that's the case and your a moderator please feel free to delete this post and send me a message I don't want to get anyone in trouble but I was totally interested in that and I would love to see it on the nano or the tetra or both

yeah sorry if that wasnt clear i took some benedyl about 45 minuites ago and im pretty out of it allergy season is in full swing here

export data as a csv and load into an offlline saved map either on a box or mobile device... doesnt give you real time info like what business is located on that spot but if all you're trying to do is get the lay of the land ap wise that shouldnt matter there is also a really good 3rd party map app i downloaded not too long ago for android that pulls map data from google but stores the map pins locally on your phone that recieves KML imports now we just need a good looking module to accept a gps dongle save scanned data as a table and export it as a csv or kml!!! :-) https://support.google.com/mymaps/answer/3024836?hl=en https://play.google.com/store/apps/details?id=com.exlyo.mapmarker&hl=en

hey I was messing around with signal strength and i had a few ideas I wanted to throw out. +---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 1. every time you hit the scan button the graph sections change color which can make it hard to glance down and see what you're doing on the fly, couldn't the color be assigned by mac address and reset as soon as the ap is out of range 2. It would be great if this could be configured to find the distance of clients as well as aps and define the association or lack there of between ap and client 3. this would be great to integrate into recon mode!!! thanks for your time Archer

So I have been looking into the serval mesh project an I have been wondering if anyone had any ideas on a quick and dirty way to use the yardstick1 and the wifi pineapple as a serval mesh extender since the combined hardware capabilities seem similar to their current incarnation of the mesh extender any thoughts anyone? Link to the mesh extender wiki http://developer.servalproject.org/dokuwiki/doku.php?id=content:meshextender:main_page

ok so I'm having a problem with Occupineapple and I've tried using nano as has been suggested to me but it hasn't helped no matter what I do when I start Occupineapple it says it's using list: Random and I don't even have a list random I've set it to other lists but to no avail and this is really getting frustrating any help would be much apreciated Thanks

I am having this same problem... wanted to know if it was ever resolved Thanks

Indeed it can... thanks I figured it was better to pass it along to more capable hands than my own just in case something came of it...

So I was messing around with dsploit on my Nexus 7 running CM11 and probing my pineapple which I set up as a temporary signal repeater connected to my back up router in client mode when it found an exploit that (near as I can tell as I am a little rusty and very tired) allows auth bypass for root access. I've attached below two screen caps of dsploit one of the vulnerability finder and another of the exploit list in the hopes that someone better than myself can either confirm or deny it's validity Thanks Archer

Thanks will do :-)

Hi everyone first off I'll admit the I am a bit of a noob and this could be user error but i might have a possible bug and its driving me crazy I have been using the Ducky for a bit and I have been using the toolkit to encode my payloads but no matter what I try every time i use the GUI or WINDOWS command it doesn't work at first I thought it could just be an error on my part maybe i was using it wrong the script language is extremely simple but when fixing an error the place to start is usually -user error #8675309: "Incompetent User"- so i used a simple but ingenious Payload from the wiki (props to Caleb) that in included the WINDOWS command and sure enough i got the same problem instead of registering as a super key press it registers as the letter "e" as if it were introduced with the STRING command this only happens while trying to use either the GUI or WINDOWS commands by them selves if you use a combo like GUI r or GUI d for either run or show desktop it operates as it should but every time i use them normally it STRINGs "e" I never really used the GUI command by it's self much prior to now but I want to say it used to work the few times i did and i recently re-flashed it with the Detour Duck firmware and decided to go back to Simple Duck could something have gone wrong with the flash? or could this be an error on the toolkit converting it into the wrong hex? and if so any ideas how to fix it? thank you for taking the time to read this :-) ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: attached is the payload I copied that got the same result I've been having ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: REM Author: Caleb Hutchinson REM Duckencoder: 1.0 REM Target: Windows 7 REM Description: Changes the users desktop background to a Rubber Duck REM saying “YOU GOT QUACKED!” with a Hak5 logo :D REM :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: DELAY 2000 UP GUI d GUI DELAY 2000 STRING http://img46.imageshack.us/img46/2199/45760922.png? ENTER REM Opens up window and goes to a image I created xD DELAY 700 CTRL S STRING %userprofile%\Desktop\QUACKED ENTER REM saving the picture to the user Desktop, pic name QUACKED... DELAY 700 GUI d REM shows desktop WINDOWS r STRING %userprofile%\Desktop\QUACKED.png ENTER REM opens the png fill MENU sk ENTER ALT F4 REM sets the background, and closes. GUI d MENU STRING v STRING d REM I know its basic but tell what you think im only 14 and this is my first "program" thanks Darren

Okay so I ordered the Rubber ducky earlier this week and got it yesterday I've spent the better part of the day (roughly 14 hours) just playing around with it however when i try to use the online script generator to add a new admin user to windows all it seems to do is open a large series of windows and tabs the only thing i can assume is that my navigation lay out is different than the template used to design the scripts for the generator... i have no problem just scripting this myself but I'm not familiar with all of the code involved between windows Linux and android by any chance is there a how to or a compilation of the different keyboard commands for android thanks in advance for any help and thanks for taking the time to read my frustrated ramblings :-)