WallE

It will not power the pineapple enough or it will not work at all? Because for me it is working but it seems I have some power issue for some modules

Did you put the correct html file in the /www/ folder with winSCP? I am actually working on that so if you need help just tell me. You gonna need the correct html file and the correct php file. You have to put them on the /www/ folder through winSCP. But you will not have enough memory so you have to swap a USB dongle. And redirect one of your USB folder to the /www/ folder. Use that command -ln -s /usb/phish/* /www/ btw I used /phish because that's the name of the folder I created you can make anything you want.

New router with Reaver protection. HSTS to prevent SSLstrip. windows 7 and iOs prevent karma module. We can't talk about phishing page anymore. Should have buy that pineapple 1 year ago. It look outdated now :(

This is still a big leap. 1 AP with a Wifi pineapple with antenna vs 6 on a normal laptop. I was trying that because I was wondering why the jamming module wasn't deauthing. Any idea what is the cause?

Firefox was the problem. I have been able to connect it through Google chrome.

Ehmmm my PoE lan port of pineapple 1 is using by laptop tethering. Can I plug Pineapple 2 PoE/Lan to wan/lan port of Pinapple 1? Well I tried it and it's not working :(

What are you using to power it? I had the same problem at start when I tried with the pineapple juice. WPS was flashing all the time, then LAN and WAN start flashing for few second then they go offline and WPS start again, an infinite cycle. I plugged it with an AC adapter and it worked like a charm, I tried it again later on with the pineapple juice and it's working now. Don't ask me why haha

Like said above it is only this one and I downloaded almost all the modules I second all that

I tried to put 3 different wifi device into monitor mode to run airodump-ng 1. The wifi pineapple with a 5 dbi Antenna. Connected to the 10000mAh 5v 1a power bank Found 1 AP 2. Alfa awus036h with a 14 dbi Antenna. Connected to a belkin F4u040 usb HUB powered by a 10000mAh 5v 2A.power bank Found 3 AP 3. My laptop with BT5 and a random wireless card 5 AP I supose it's a power problem, I will try right now to plug the pineapple into an AC adapter instead of the 10 000 mAh power bank and I will give you some feedback. EDIT: fourth and fifth test: 4. Wifi pineapple connected through an AC adapter, full power on. 5 dbi Antenna 1 AP 5. Alfa Awus036h with a 14dBi antenna, connected to the usb port of Wifi pineapple. 3 AP So well, I supose the problem is not the juice............................... Wtf is wrong Edit2: I will do one last test, the Alfa connected to the bt5 laptop...... Edit 3: Now I am piss. The 14dbi antenna plugged in the bt5 laptop is getting 6AP.... What is wrong with the Pineapple why nothing seems to work on that machine. PS: I noted that power management was on. I supposes it will work more efficiently if it was off. But it was ON on the pineapple too. Any idea what is the purpose of power management and how to put it off?

I have the same thing and as they said above If I click remove it will remove all my modules. And if I unpin, it will also unpin all my modules

Alright so as you probably all know already, karma is not working anymore. So I was wondering what we can do to replace this broken feature I have been reading the forum a lot and I find only one solution. And it's quite far away from what Karma should be: But this solution is not satisfying So I was wondering if it was possible, instead of doing that, to connect to the targeted SSID (In this exemple coffee_shop_wifi) and run all our tool from there. I think that would be way more productive than creating a fake SSID and hoping for the client to run on it. But well, is it actually possible with the wifi Pineapple? And if anybody have others solutions to replace the mk4 karma module, share with us and let's find a better idea

Well I was wondering, with the new protection (HSTS) which website is still working with sslstrip? Facebook Gmail Twitter Are not working because of HSTS. Is there a list of non-working website with SSLstrip?

I have access to the WebUI but I have a connectivity error. I did everything as explained on the book. I have no idea why I have no connectivity. Here are the pineapple logs (Same as posted above) I am actually upgrading the firmware through SSH, hoping it will fix anything (What I highly doubt but well, I have really no idea what is the problem)

Firmware version: 2.7.0

I can I am actually connected to the internet with my wireless network connection and I have enabled shared network. Pineapple is connected to the local area connection and I fixed the IPv4 as you can see in my screenshot.

Yes sure I did everything as they said. I plugged the ethernet cable in the PoE lan in the wifi pineapple if that change something.

So I finally been able to access the wifi pineapple by typing 172.16.42.1:/index.php But there is no public internet and I absolutly don't understand why. Here is a screenshot http://imageshack.us/f/547/noconnection.png/ EDIT Logs:

Alright so I just receive my 2 brand new Wifi Pineapple, first time I try to use them but I am already struggling. First of all. I plugged my wifi pineapple to the pineapple juice than I connected the wifi pineapple to my Laptop by tethering. Once I did that, I used the script wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1:1471 & On BT5. It then directly redirected me to 172.16.42.1.xxxx but nothing happenned. On my Pineapple the WPS is always flashing then after a while LAN and WAN light up. And disappear few second after and WPS start again. And it do that non-stop I tried on Windows too and the exact same thing happenned. What am I doing wrong? EDIT: So I tried something new. I plugged my wifi pineapple to the AC adapter in the wall. Then I tried to tethered on WIndow. WPS is online, WLAN too. There is even a SSID pineapple12:da So I fixed the setting in W7 (Put the local area ethernet IPv4 as 172.16.42.42 netmask 255.255.255.0 and the google gateway 8.8.8.8 But when I try to connect to 172.16.42.1/pineapple it is redirecting me to 172.16.42.1/redirect.php and the page stay blank. Any help would be really appreciated.

Oh well, 20 on 550 probe request. Not even 5%... That's mean this feature is totally broken and useless. And isn't the main feature of the pineapple?

Well....Is it possible to know which OS will auto connect to the wifi Pineapple and which one will not? Almost everybody is buying the pineapple for the auto-connect feature and learning it is not working is a huge deception

Finaly I bought the F4U040 because I find one good comment on this website. Here is the output of my battery can you confirm this setting will work and not do any harm to my brand new wifi pineapple? USB hub: Belkin F4u040 Battery: I bougt 2 10 000mAh output DC 5V/1A/2A Input DC 5V/1A And the other one is: 8000mAh Ouput DC 5V 2A/0.6A Input: DC 5V/1A Note that I have 2 wifi pineapple that I want to connect in TANGO mode. Actually I find this pic, on this pic he is plugging both his pineapple on the Battery bank. http://www.flickr.com/photos/85358625@N08/7813085346/in/photostream (Credit to Neworld setting) So I just put plug one pineapple on 2A usb hole and the other one on 1A usb hole right? So please tell me which battery I should use, and if I can use both at the same time, and if this setting will actually work without problem. Thanks you and please give me some support for this I bought those kit for 300$ and I want it to work.

I found these USB hub can they work the the pineapple without backfeeding? Delkin: F4u020sa F4u040sa F4u029qe and Cliptec USB 4 port hub RZH210 Is one of them can work ? Don't want to buy them for nothing.

When the hackshop will finally ship in Asia?

Thanks so if I understand correctly this will work but I have to find the USB capable. Do you know any good USB hub we can buy in Asia?

Oh well I purchased 2 power bank battery for my 2 wifi pineapple but I just read that 5volt input was not working. So here what I bought Specifications: Battery cell: Lithium Polymer Product Dimension：97*64*24.5mm Input Voltage: 5V Input Current: 1000mA Capacity: 10,000mAh Working temperature: -10 degree to 40 degree Storage temperature: -20 degree to +50 degree Product weight: 190g Package includes: 1 x 10000mah Power Bank, 1 x USB Connect Cable with 3 connectors 1 x User Manual Item No.:80611 I was wondering if it could work on my wifi pineapple, also do you have any idea of what powered hub I could buy in ASIA without burning my wifi pineapple? I know there is already many post about that but everything I saw doesn't ship in Thailand unfortunately.