Search the Community
Showing results for tags 'scp'.
-
I am unable to SCP or SSH to the mark V. Getting "permission denied" error for both. This has been constant prior to today; however, today when minimizing infusions they will no longer maximize again and I cannot factory reset or even properly reboot the device. So I need to be able to reflash it over SSH. Any ideas? Am I overlooking something here? Using port 22 for both.
-
Hey! The page that is used is not created by me , its made by the maker of <snip>! i have only made it work for the pineapple!! Requirements: 1.Evil Portal infusion 2.putty or an other way to ssh into your pineapple 3.win scp or an other way to scp into your pineapple 4. internet connection on your pc and pineapple Installation: 1. Download: <snip - link removed> 2. Scp install.sh into the root ("/") directory on your pineapple. 3. Ssh into your pineapple and navigate to your root folder : cd / 4. type : bash install.sh and then hit enter. 5. when it says "installed , have a nice day" then its finished. 6. now go to the WebUI of your pineapple and go to the large tile of NoDogSplash/EvilPortal 7. Follow The Instructions it gives you and once everything is set up click on "start nodogsplash" 8. Your done happy phising! ThroubleShoot 1.if you go to any page and it loads normally or it gives an error go to the configuration tab on the WebUI and click DNSSpoof and if anything is in there delete it and then put :172.16.42.1 * in there and enable DNSSpoof. 2. it is supposed to only give an "incorrect login" message because you then have more chance that people go back and type their facebook login in and if its wrong they do it again but then with gmail and you have both! :) Disclaimer: I am not responsible for any malicious activity you do with this page ! I am not trying to encourage malicious activity i made this out of curiosity if it would work ! If anything is wrong or if you have any questions please leave them below!
-
[sOLVED!] For those of you having the same problem as me, I fixed it by using the power cable that it was shipped with, rather than the USB power cable. Because I am in the UK, I had to use a shaver to mains adapter. Thanks everyone. Hey guys, me and a friend got our hands on the AP121U via ebay and were hoping to flash them with the Jasager firmware. We followed the guide to the letter and used UART cables to flash the factory binaries onto the devices. However, they enter into a boot loop after resetting them. I can hit 'f' and return to drop into failsafe mode, where we're presented with the following prompt: root@(none):/# I've tried starting dropbear to scp over the Jasager files to /tmp/, but I can't even establish a connection (yeah, I'm using the PoE port). Any ideas would be much appreciated. P.S. I thought it could have been a dodgy AP121U, but my friend's does EXACTLY the same thing as mine.