Jump to content

Pineapple reboots...

Recommended Posts

Hi Everyone,

I'm having issues with my pineapple Mark V, as the tittle said, it reboots when Im connected to the management WiFi using my cellphone, and checking the clients connected (even if there isn't any), showing the "entropy bonny" to suddenly lit the red led and reinitiate.

This happened with under the following escenario:

  • Pineapple connected to RJ-45 configured with the new client mode to access internet
  • Running Karma, PineAP, Beacon Response, Auto Harvester and SSLStrip.
  • MicroSD Sandisk Ultra 32GB, also tested with the 2GB stock MicroSD.
  • All the rest setting as default.

My unsucessful attempt to troubleshoot this was execute the un-brick flashing process using the factory.bin firmware image, to later upgrade the firmware from the 2.0.4 version to the latest 2.3.0.

Im currently running the 2.0.4 firmware on the Pineapple, as it seems to be more stable than the 2.3.0 firmware. If any further information is required, please do not hesitate to ask.

Any advice or tip will be much appreciate to solve this will be much appreciated

Link to comment
Share on other sites

Hi again,

It seems that the problem is related to the PSU, I tried replacing the stock 9v 1.5amp for a 12v 1amp PSU, the pineapple seems to be more stable after that, I upgraded to 2.3.0 firmware, and now can handle 4 clients with the mentioned enabled attacks .

Unfortunately when I tried to execute a second attack via SSH, adding another wlan1 monitor interface (PineAP has one running) and lunched wifite, pineapple wasn't able to handle the tasks, and rebooted when it was looking for networks.

Wifite worked fine when I ran it with the 9v 1.5 amp power supply, wlan0 down, and with the 2.0.4 firmware.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...