crazyclown Posted March 29, 2015 Share Posted March 29, 2015 (edited) Would the following sceanrio work? Pinapple A is running the complete PineAP suite. Pinapple B is connected to the internet via WiFi/3G. Can you provide Pinapple A internet through ethernet using Pineapple B? Edited March 29, 2015 by crazyclown Quote Link to comment Share on other sites More sharing options...
Crypiehef Posted March 31, 2015 Share Posted March 31, 2015 Yes, you just need to put the ethernet interfaces on the same subnet (static). Then enable ipv4 forwarding on Pineapple B. There are other ways to do this, I figured this would point you in the right direction. Quote Link to comment Share on other sites More sharing options...
crazyclown Posted April 1, 2015 Author Share Posted April 1, 2015 Thanks for your response. Wouldn't they be on the same subnet by default? I'm guessing I will need to change the IP for Pineapple B to 172.16.42.2? Quote Link to comment Share on other sites More sharing options...
crazyclown Posted April 2, 2015 Author Share Posted April 2, 2015 Got my second Pineapple yesterday and I haven't really had much success with this. Any advice? So far I've changed the IP of the second Pineapple to 172.16.42.2, connected it to the internet using wlan1, then connected it to my laptop using Ethernet. I then tested it by browsing websites on my laptop (which isn't connected to any network except the Pineapple) and it seems to work fine. So now when I connect it to the other Pineapple running PineAP, the clients connected to PineAP still can't get internet. Do i need to run the wp5 script on the second Pineapple or something? I'm guessing I need to change the "Wired Internet Settings" to "Client Mode". Not sure if I need to use static or DHCP? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.