intertan Posted October 31, 2012 Share Posted October 31, 2012 I am currently playing with reaver and am looking at something more Mobil. I have the following mkiv AWUS036NHA slim usb drive. nexus 7 tablet Battery wise I am looking at 2 options 1 anker Astro3 @ 10000mAh 2 http://www.milwaukeetool.com/tools/cordless-tools/batteries/batteries-18-volt/m18-redlithium-xc40-extended-capacity-battery-pack/48-11-1840 with http://www.milwaukeetool.com/tools/cordless-tools/m18-cordless-system/m18-power-source/49-24-2371 I have everything except the new battery already for the Milwaukee setup So regarding the cabling to connect the flash drive and alfa card what would I be looking at doing? non powered usb hub or powered? and can I use my table to connect to the pineapple to control it and do other stuff besides reaver? Quote Link to comment Share on other sites More sharing options...
loozr Posted October 31, 2012 Share Posted October 31, 2012 Why would you use that Milwakee battery to power your setup? I may be very wrong here, but that Milwakee battery is 4 Amps, while your Anker Astro is 10 Amps, and although the Milwakee battery is 18v it would not last as long as your Anker Astro. This is because I think 1 Amp is 1 Amp regardless of the voltage. But you or others may very well correct me on this, because I'm not sure myself. Regarding the cabling you should use a powered USB hub that doesn't backfeed power. Have a look in this thread http://forums.hak5.org/index.php?/topic/27837-bad-luck-with-powered-hubs/ It's recommended a hub there. And as far as I know your tablet should be able to do anything a laptop could do, as far as the web interface on the Pineapple is concerned at least. Quote Link to comment Share on other sites More sharing options...
creatox Posted October 31, 2012 Share Posted October 31, 2012 definately powered usb. ive been looking into powered vs non powered myself.. and from what i've seen, non powered is really hit or miss. but the alfa usb cards seem to universally hate non-powered usb hubs also, i use a moto xoom to connect to the pineapple all the time. web ui, i use firefox, and ssh .. gotta go with connectbot Quote Link to comment Share on other sites More sharing options...
intertan Posted November 2, 2012 Author Share Posted November 2, 2012 Why would you use that Milwakee battery to power your setup? I may be very wrong here, but that Milwakee battery is 4 Amps, while your Anker Astro is 10 Amps, and although the Milwakee battery is 18v it would not last as long as your Anker Astro. This is because I think 1 Amp is 1 Amp regardless of the voltage. But you or others may very well correct me on this, because I'm not sure myself. Regarding the cabling you should use a powered USB hub that doesn't backfeed power. Have a look in this thread http://forums.hak5.o...h-powered-hubs/ It's recommended a hub there. And as far as I know your tablet should be able to do anything a laptop could do, as far as the web interface on the Pineapple is concerned at least. I have the stuff now, except for the new 4amp battery as mine are the older 3 amp ones Quote Link to comment Share on other sites More sharing options...
Moriarty Posted November 29, 2012 Share Posted November 29, 2012 I test my pineapple with 2 SAFT LSH20 Batteries (7.2v 13A) and it was running a airodump-ng for 27 hours!!!!!!! In this test i used conneted to my pineapple a modem 3G and a USB Pen. Quote Link to comment Share on other sites More sharing options...
Moriarty Posted November 29, 2012 Share Posted November 29, 2012 http://postimage.org/image/hi4v95u4x/ This is my pineapple with the 2 batteries LSH20 Quote Link to comment Share on other sites More sharing options...
hfam Posted November 30, 2012 Share Posted November 30, 2012 (edited) Regarding the cabling you should use a powered USB hub that doesn't backfeed power. Have a look in this thread http://forums.hak5.o...h-powered-hubs/ It's recommended a hub there. And as far as I know your tablet should be able to do anything a laptop could do, as far as the web interface on the Pineapple is concerned at least. I LOVE my Anker 10000mAh battery...the one with the selectable 9v/12v output. - Anker goes into MKIV with the barrel connecter, Anker set to 12v - hakshop powered usb hub goes into pineapple (the red connector doesn't get used in my setup, so the hub isn't "powered" per se) - USB sandisk goes into hub - mini-usb connector on hub goes into AWUS036H and it all works perfectly, and I don't have to worry about back feeding power, etc. Edited November 30, 2012 by hfam Quote Link to comment Share on other sites More sharing options...
jmora Posted December 6, 2012 Share Posted December 6, 2012 (edited) I LOVE my Anker 10000mAh battery...the one with the selectable 9v/12v output. - Anker goes into MKIV with the barrel connecter, Anker set to 12v - hakshop powered usb hub goes into pineapple (the red connector doesn't get used in my setup, so the hub isn't "powered" per se) - USB sandisk goes into hub - mini-usb connector on hub goes into AWUS036H and it all works perfectly, and I don't have to worry about back feeding power, etc. Hey! and for how much does it last? What a headache I'm having just for wanting a good battery. Thanks Edited December 7, 2012 by jmora Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.