Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by Br@d

  1. found the issue in another thread.... for some reason the pineapple will not resolve "example.com" which it uses to check connectivity prior to installing. ***note it resolves everything else***
  2. yeah I'm not seeing a scripts either, but I can give it some time and wait for a version update too 🙂
  3. yup that's the weird thing, can ping and tested opkg without issue.
  4. So I can connect to a wifi network but and load the news... but when I add modules and go to install dependencies it keeps erroring saying there is no network connection
  5. I've been testing some c2 settings in a lab and have my Pineapples connected fine (needed to update the host files) but I can't seem to get the Squirrel to talk to it (no attempts show in the c2 log) running firmware 3
  6. I'm trying to test a few things with a self hosted C2 and a Tetra on the same LAN. since it want setup to work both internal and external via a host name, I setup an a record on my internal DNS so that the external DNS name will resolve to the internal IP while on the same LAN. This issue is getting the Tetra to look to my DNS server automatically. I'm currently using eth0 (wired) for my network connection. What I would like is for the Tetra to get its DNS information from the same DHCP server that is handing out it IP address. I have tried removing the "Option DNS," from /etc/config/network under bot WAN (eth0) and WWAN with no luck. I know that I can edit the /etc/resolve.conf file (currently pointed to 127.0.01) or add a static entry to /etc/hosts (which I have done to get things working internally for now), but I'm looking for a means to do this via the DHCP issues DNS servers so that it will revolved the host name both internally and externally based on the network that it is connected to. Any suggestions?
  7. I'm running into a similar issue but I also get some additional info... is there any documentation around the let's encrypt process?
  8. gotcha... I must have missed that part in the vid... thanx
  9. I keep getting : Syntax error: ")" unexpected when trying to run for the first time.
  10. I now have both the Nano and Tetra (yay me), and I went to do the firmware update on both. I connected my tetra to the system that I normally use it with and it connected fine to the internet (via internet shareing on my LAN NIC). Then I tried to the same with my nano, this did require me to go through the basic internet sharing step again. This time it did not work and i cannot get the tetra working again either. I tried on another system with the same results. Any thought on where I messed up? and what is need to run both devices on the same laptop?
  11. Nailed it! thanks I was going so far down the other way of thinking... Thanks for the redirection!
  12. I'm trying to brute force a physical lock that only looks at the last numbers pressed, hence using the sequences. But it times out after 40 keys are pressed. Since I will been manually entering the codes I need/want it to be as efficient as possible
  13. Let's see if I can adequately describe what I need help with here. I'm trying to shift the lines of a txt file do meet my required output. I'm trying to create a list of numbers to brute force a lock (that I own). This lock will ignore everything leading up to the correct pin. for example, if the pin is 1234 and enter 46541198751234 and it will unlock. In my research, I have discovered the De Bruijn sequence (https://en.wikipedia.org/wiki/De_Bruijn_sequence) which will allow me to quickly go through all possible PINs in a very efficient manner without having to enter each option individually. The problem is that as a weak brute force protection they lock allows for almost 40 keys to be pressed before it times out for 30 seconds. I have split the De Bruijn sequence down into 40 character lines, but to ensure that I do not miss any of the 4 digit pins I need to use the last 3 of the previous line at the start of the next. This also means that I have to cut 3 from the end of the line to stay within the 40 character limit. For example, if my file has the following list of numbers... 00000000000000000000 11111111111111111111 22222222222222222222 33333333333333333333 ... I would need to re-arrange them as follows 00000000000000000000 <- first line is untouched, but the last 3 numbers are used at the start of the next line 00011111111111111111 <- the last 3 of the previous line are added to the start of this one, but to make room 3 character are automatically bumped to the next line 11111122222222222222 <- and the process would need to continue until the end of the 100 or so lines 11111111122222222222 11111111111122222222 11111111111111122222 11111111111111111122 12222222222222222222 22223333333333333333 The also means that new lines would be added to the end of the list to accommodate the continually growing shift. Any clues on how to accomplish this?
  14. use the PineAP prob request logging/ ssid discovery
  15. correction it does not seem to go through the described update process (but i did not watch it 100% of the time) but I just checked and it is running 1.1
  16. Yeah mine came with the cool squirrel sticker, but now I really need to get my hands on the new pineapple one, it looks SICK!!!!!!!
  17. not sure what it is yet but just shut up and take my money!!!
  18. Success!! That script has changed a bit over the past few weeks... but not a lot I appears (and I'm guessing) that there is some background services needed that have not loaded by the time the script was called. The fix was to set the pi to auto-login and call the script for the .bashrc file... this seems to be working well, but I have a lot of testing to do. Thank you everyone for your help!
  19. Awesome, thanks.. that was a lot of help! so here is the next funny thing..... The script runs exactly as expected if run it manually "sudo ./MyScirpt.sh" But... when running it as a start up script it does not run correctly. Instead it shows the airodump-ng scan on the screen and does not quite after 30 seconds... thoughts?
  20. ok I seem to be having issues getting this to run at power on.... can you try to elaborate on they steps needed in a Linux for dummies version.... (the amount I have learned in the last few weeks has surprised me but there is still a long way to go )
  21. those files are actually created with line #33 # running the wireless survey airodump-ng -w $recon --output-format csv $wlaninterface &> /dev/null & on parrot system (currently dead) do not try to call those variables until they actually called into action later in the script after the relevant content was created. They should just be defined at the start but seem to be called on instead... is that possible?
  22. oops sorry... the error is "line 22: -1: substring expression < 0" but I just noticed that the was one error before that "grep: scouted*.csv: No such file or directory" It looks like it is trying to call the variables before the are actually called on ---- or something like that
  • Create New...