Jump to content

hextor

Active Members
  • Posts

    12
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

hextor's Achievements

Newbie

Newbie (1/14)

  1. ok cool I would have thought that when i downloaded the modules that the dependencies would already been included. good to know. I will try and report back.
  2. Not at the time I was doing any of this. Why should I be doing this? are dependencies downloaded from the internet?
  3. ok fresh boot... steady blue light... i navigate to OCCUPINEAPPLE Dependencies NOT INSTALLED I click on NOT INSTALLED and it goes to a popup window that says INSTALL DEPENDENCIES Please wait do not leave or refresh this page. once install is complete this page will refresh automatically it doesnt refresh you have to click on internal button for it to go back to the page where it says INSTALLING, clicking on the INTERNAL button or not has the same result after a few minutes nice big RED NOT INSTALLED???? maybe its just that module so i go to DEAUTH module and clcik on NOT INSTALLED same song and dance.........INSTALLING.......... after a few minutes big RED NOT INSTALLED..... what to do? maybe bad download module package? so I uninstall modules and reinstall..... yea same song and dance.. anyone have any ideas why this is happening?
  4. Im assuming that the scan results of the WPS module are all ONLY WPS enabled access points? How can I tell from the scan results if the access point is locked? how are the scan results sorted? by strongest signal? When using wifislax and laptop I do not get WARNING FAILED TO ASSOCIATE WITH XX:XX:XX:XX:XX:XX why is the pineapple failing to associate so often? Ive read here that REAVER is not compatible with libcap? so what is the work around or possible solution? regarding the fix QcSmoker has posted, should i be doing this? has this been addressed since 2016?
  5. hello all, Well first off this is my setup: 1 desktop windows 7, connected to internet via wifi. 1 linux laptop, used to connect to pineapple Well one of the first things I did was to brush up on the procedure. connect power, connect usb to ETH, and USB to pc. so far my win 7 machine recognized a new device local area connection 2 wifipineapple 98b1. I now proceed to setup internet connection sharing. I follow the steps as follows: right-click on my active internet connection (in my case my wifi connection) and go to properties, then over to the sharing tab. under the sharing tab I click the first box to ALLOW connections thru this machine. and then there is a second box (dont check it) BUT... between both of these boxes there is a drop down field (now here is the tricky part... IF and I stress IF your ethernet cable is not connected to the pineapple u will NOT get the drop-down below the first box) IF you already connected the cable then the drop down clearly asks which connection to SHARE with. I break it down like this because I did not connect the cable, and did not get the drop down menu, only by trial and error did I figure this out. ok so ive got the first part of my internet connection done, now I right-click on my local area connection and choose properties on to the ipv4 section and click on properties to reveal the ip configuration window, I configure as follows 172.16.42.42 subnet 255.255.255.0, DNS 8.8.8.8. click ok .. wait for the hourglasss to apply changes. BLAM all looks ok i right-click on the local area connection and go to status then details and i can see my chages took effect. I connect with the laptop to the pineapple, then browse to 172.16.42.1471. I get the logon window and then the dashboard.. so far so good. I click on retrieve news bulletins and i get no internet connection, altho the orange light is blinking like silly... I go to the networking menu in pineapple and it shows 172.16.42.0, 255.255.255.0 for the relevant info that is there. long story short the USB TO ETH cable was the problem... I did not need it, once I unplugged that cable from the pineapple I was able to get to the advanced menu item and click on check for UPDATE,. Then comes thewonderful option of do you want to upgrade your firmware? HELL yes.... bipity bop a download insues, the lights flash the pineapple disconects and reboots, I reconnect via the laptop to the pineapple and it says to press quickly the reset button to disable WIFI or hold it down longer to continue with, I opted for without, then comes the page that says THE WIFI PINEAPPLE IS STILL BOOTING PLEASE WAIT UNTIL THE IT HAS FULLY BOOTED SETUP WILL CONTINUE AUTOMATICALLY, that was 40 minutes ago. im quite sure that its not supposed to take that long.. so what did I do? I unplugged it and rebooted right back to a blinking orange light for my network connectivity and a solid blue ready freddy. I see the pineapple _981b network and connect, I get in my browser a big fat WELCOME.... and a GET STARTED BUTTON ( so far it doesnt look like I messed anything up) I click on get started and again QUICKLY PRESS AND RELEASE reset button to disable wifi OR PRESS AND HOLD FOR MORE THAN 2 SECONDS to continue with wifi on? SCREW it last time I did a quck release and i got 40 minutes of nothing. This time the screen went GRAY and the usual dialog of THE WIFI PINEAPPLE IS STILL BOOTING, was gone. and the blue light is on and the orange is blinking (wasnt doing this b4...just 40 min of orange) all i could see behind the Gray was a setup screen to set root password ETC... I click in the box, nothing the whole screen is still gray.... I wait a few more minutes of no visual indication of new activity I click on the password field again and the whole screen goes white, and all the fields are accessible now cilick complete setup.. and i get a setup completed screen, and that YOU WILL BE REDIRECTED MOMENTARILY.... the wireless disconnects and MOMENTARILY never happens... why? because you have to physically click to reconnect to the newly created/password protected pineapple. oh yea and dont even bother refreshing the MOMENTARILY PAGE, you have to open a new browser window to refresh the cache files. FIRMWARE UPGRADE TO 1.1.2 successful, stressfull, and now ready to be played with.
  6. Really Sud0nick? 6 videos? and not one of them about WPS? LEARN WHAT? I want to learn what I want not what you are doing. really exactly what is false?
  7. Dont do it. dont waste your money. read the forums.... issue after issue with literally all modules. my tetra sits on a shelf because It wont do what they said it would do. I figured I would go with one of the simple modules like WPS.. yea right no such luck. ive not found anyone on the forums who has posted that it works for them. what does that tell you? I regret wasting 230$. my trusty ol laptop with wifislax n tools works EVERYTIME. what a waste. of course i could sell mine, but how could I screw someone like that?
  8. Dont do it. dont waste your money. read the forums.... issue after issue with literally all modules. my tetra sits on a shelf because It wont do what they said it would do. I figured I would go with one of the simple modules like WPS.. yea right no such luck. ive not found anyone on the forums who has posted that it works for them. what does that tell you? I regret wasting 230$. my trusty ol laptop with wifislax n tools works EVERYTIME. what a waste. of course i could sell mine, but how could I screw someone like that?
  9. Dont do it. dont waste your money. read the forums.... issue after issue with literally all modules. my tetra sits on a shelf because It wont do what they said it would do. I figured I would go with one of the simple modules like WPS.. yea right no such luck. ive not found anyone on the forums who has posted that it works for them. what does that tell you? I regret wasting 230$. my trusty ol laptop with wifislax n tools works EVERYTIME. what a waste. of course i could sell mine, but how could I screw someone like that?
  10. WOW, I thought I had problems, man every single module in this forum has serious issues, mainly that what the description says it does and what it actually does is TWO very different things, i should have stuck with kali n my wifi card I get better results, so far ive had this box for like a month and i cant get to work what I want , im sure some modules work but not the ones i want. i feel like i got taken for a ride
  11. Well sadly ive scoured the web and have not found anyone who got this to work, I think its sad that I spent 230$ and now all this thing does is blink lights... I cant tell from the output and layout of the modules that this was all done half assed, Explain to me how I have a WPS enabled router, but when I SCAN, and get results.. EVERY ACCESSPOINT says NO to WPS even the one sitting next to me. SO I decided to use WIFISLAX and LINSET/FLUXION, great programs. So I figured thaT I would use Deauth to handle bumping the clients off... but guess what? after i hit install dependencies it changes to orange and says installing and then it goes back to green and nothing has changed. NOT COOL im ready to start talking all kinds of shit to anyone who will listen, now i got to find someone to buy this brick off of me or let it sit in the closet till someone gets thier shit straight
  12. Wps. First I go to my interface and use the default wlan1. I hit start monitor, it does its voodoo. I then go to scan results and again I use the default 15 sec, and I hit scan, it does its voodoo. The scan results are displayed. Nice. But why does every result say NO to Wps, when I know full well that besides my own router should have displayed YES. I'm looking at WASH on another BT5 laptop and I can see YES to WPS. So why are preliminary monitor scan results wrong? Ok anyway that did not stop me.... I clicked my router, and whalla under the OPTIONS heading all the fields populated my router info lay, along with other obvious pertinent info... yay... so now under the second OPTIONS heading I hit the first one auto detect and the 3rd one use small dh. Also I thought I'd try ... run pixiewps, and display non critical messages. Blam! I'm ready I didn't bother with the advanced section, jus keepn it simple for now. I scrolled up n hit start. It changed red to stop. So now it has been 40 minutes, and under the OUTPUT section all it says in faded gray.... wps is not installed... hmm refresh log? Nothing..... HISTORY section.... Zero.... refresh log? Again same nil. So mean while pineapple is blinking red like silly.... I'm going to bed... let's c what happens after 8 hrs, if I get a log or hit the bathroom n deposit one... Jus woke up, all logs empty, red light on tetra on n off. I hit the red stop next to Wps, n I got nothing Did I miss someting
×
×
  • Create New...