Jump to content

Authentication problem for open network


mimo
 Share

Recommended Posts

Good evening,

I upgraded my nano via the web interface from version 1.0.2 (I think it was this one) to the latest one 2.0.2. Before everything worked nice, but after the upgrade I am not able to connect to the open wifi, the "victim" one, anymore. I get an authentication problem with android and windows. That seems to be really strange since the network is open.

But I have no problems to connect to the administration network and to configure the nano. I also did a reset via the web panel, but no success. Do you have an advice for me how to fix this problem?

Link to comment
Share on other sites

I made a firmware recovery, but no success either. Here is the debug log. I am not a pro in this subject so there could be something important (removed the AP list):

 

============CPUINFO========
system type		: Atheros AR9330 rev 1
machine			: WiFi Pineapple NANO
processor		: 0
cpu model		: MIPS 24Kc V7.4
BogoMIPS		: 265.42
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 16
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

Firmware Version: 2.0.2
=============LSUSB=========
Bus 001 Device 004: ID 05e3:0745 Genesys Logic, Inc. 
Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==============DF===========
Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.4M    240.0K      2.2M  10% /
/dev/root                12.3M     12.3M         0 100% /rom
tmpfs                    29.8M    124.0K     29.7M   0% /tmp
tmpfs                    29.8M     76.0K     29.8M   0% /tmp/root
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock3            2.4M    240.0K      2.2M  10% /overlay
overlayfs:/overlay        2.4M    240.0K      2.2M  10% /
==============IW===========
phy#1
	Interface wlan1
		ifindex 20
		wdev 0x100000008
		addr 00:c0:ca:91:95:c0
		type managed
		txpower 20.00 dBm
phy#0
	Interface wlan0-1
		ifindex 18
		wdev 0x9
		addr 02:c0:ca:91:7d:5d
		ssid Pineapple
		type AP
		channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
		txpower 17.00 dBm
	Interface wlan0
		ifindex 17
		wdev 0x8
		addr 00:c0:ca:91:7d:5d
		ssid Free Wifi
		type AP
		channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
		txpower 17.00 dBm
===========IFCONFIG========
br-lan    Link encap:Ethernet  HWaddr 00:C0:CA:91:AC:75  
          inet addr:172.16.42.1  Bcast:172.16.42.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3677 errors:0 dropped:275 overruns:0 frame:0
          TX packets:4004 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:869568 (849.1 KiB)  TX bytes:3178272 (3.0 MiB)

eth0      Link encap:Ethernet  HWaddr 00:C0:CA:91:AC:75  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3958 errors:0 dropped:8 overruns:0 frame:0
          TX packets:4016 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:994290 (970.9 KiB)  TX bytes:3178824 (3.0 MiB)
          Interrupt:4 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:178 errors:0 dropped:0 overruns:0 frame:0
          TX packets:178 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:12436 (12.1 KiB)  TX bytes:12436 (12.1 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:C0:CA:91:7D:5D  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:304 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:55661 (54.3 KiB)

wlan0-1   Link encap:Ethernet  HWaddr 02:C0:CA:91:7D:5D  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:305 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:55725 (54.4 KiB)

wlan1     Link encap:Ethernet  HWaddr 00:C0:CA:91:95:C0  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

============SURVEY=========
{
    "ap_list": [
    ],
    "unassociated_clients": [
    ]
}============DMESG==========
[    0.000000] Linux version 3.18.84 (@02fc9f092662) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #14 Mon Dec 25 22:24:59 UTC 2017
[    0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 80363cf0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=PINEAPPLE-NANO  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60880K/65536K available (2515K kernel code, 148K rwdata, 536K rodata, 248K init, 188K bss, 4656K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is WiFi Pineapple NANO
[    0.380000] Switched to clocksource MIPS
[    0.380000] NET: Registered protocol family 2
[    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.400000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.400000] TCP: reno registered
[    0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.420000] NET: Registered protocol family 1
[    0.420000] PCI: CLS 0 bytes, default 32
[    0.430000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.450000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.450000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.460000] msgmni has been set to 118
[    0.470000] io scheduler noop registered
[    0.470000] io scheduler deadline registered (default)
[    0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.480000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
[    0.490000] console [ttyATH0] enabled
[    0.500000] bootconsole [early0] disabled
[    0.510000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[    0.510000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[    0.520000] 5 tp-link partitions found on MTD device spi0.0
[    0.530000] Creating 5 MTD partitions on "spi0.0":
[    0.530000] 0x000000000000-0x000000020000 : "u-boot"
[    0.540000] 0x000000020000-0x00000013a07c : "kernel"
[    0.540000] 0x00000013a07c-0x000000ff0000 : "rootfs"
[    0.550000] mtd: device 2 (rootfs) set to be root filesystem
[    0.550000] 1 squashfs-split partitions found on MTD device rootfs
[    0.560000] 0x000000d80000-0x000000ff0000 : "rootfs_data"
[    0.570000] 0x000000ff0000-0x000001000000 : "art"
[    0.570000] 0x000000020000-0x000000ff0000 : "firmware"
[    0.590000] libphy: ag71xx_mdio: probed
[    1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.200000] TCP: cubic registered
[    1.200000] NET: Registered protocol family 17
[    1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.220000] 8021q: 802.1Q VLAN Support v1.8
[    1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.240000] Freeing unused kernel memory: 248K
[    2.830000] init: Console is alive
[    2.840000] init: - watchdog -
[    5.460000] usbcore: registered new interface driver usbfs
[    5.460000] usbcore: registered new interface driver hub
[    5.470000] usbcore: registered new device driver usb
[    5.520000] SCSI subsystem initialized
[    5.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.540000] ehci-platform: EHCI generic platform driver
[    5.550000] ehci-platform ehci-platform: EHCI Host Controller
[    5.550000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.560000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.590000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.590000] hub 1-0:1.0: USB hub found
[    5.590000] hub 1-0:1.0: 1 port detected
[    5.600000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.610000] ohci-platform: OHCI generic platform driver
[    5.610000] uhci_hcd: USB Universal Host Controller Interface driver
[    5.630000] usbcore: registered new interface driver usb-storage
[    5.920000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    5.970000] init: - preinit -
[    6.350000] hub 1-1:1.0: USB hub found
[    6.350000] hub 1-1:1.0: 4 ports detected
[    6.570000] random: procd urandom read with 11 bits of entropy available
[    7.090000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[    7.410000] mount_root: loading kmods from internal overlay
[    7.750000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
[    7.990000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    8.000000] scsi host0: usb-storage 1-1.2:1.0
[    8.010000] block: attempting to load /etc/config/fstab
[    8.020000] block: unable to load configuration (fstab: Entry not found)
[    8.020000] block: no usable configuration
[    8.030000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[    8.090000] procd: - early -
[    8.100000] procd: - watchdog -
[    9.020000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
[    9.030000] procd: - ubus -
[    9.040000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   10.050000] procd: - init -
[   13.810000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   13.810000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   13.970000] ath: EEPROM regdomain: 0x0
[   13.970000] ath: EEPROM indicates default country code should be used
[   13.970000] ath: doing EEPROM country->regdmn map search
[   13.970000] ath: country maps to regdmn code: 0x3a
[   13.970000] ath: Country alpha2 being used: US
[   13.970000] ath: Regpair used: 0x3a
[   13.980000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.980000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   14.000000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   14.010000] usbcore: registered new interface driver ath9k_htc
[   14.170000] RPC: Registered named UNIX socket transport module.
[   14.170000] RPC: Registered udp transport module.
[   14.170000] RPC: Registered tcp transport module.
[   14.180000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.210000] tun: Universal TUN/TAP device driver, 1.6
[   14.220000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   14.280000] usbcore: registered new interface driver rt2800usb
[   14.290000] usbcore: registered new interface driver rtl8187
[   14.570000] usbcore: registered new interface driver rtl8192cu
[   14.610000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.620000] usbcore: registered new interface driver cdc_acm
[   14.630000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.640000] usbcore: registered new interface driver cdc_wdm
[   14.660000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
[   14.700000] usbcore: registered new interface driver ums-alauda
[   14.710000] usbcore: registered new interface driver ums-cypress
[   14.710000] usbcore: registered new interface driver ums-datafab
[   14.720000] usbcore: registered new interface driver ums-freecom
[   14.730000] usbcore: registered new interface driver ums-isd200
[   14.740000] usbcore: registered new interface driver ums-jumpshot
[   14.740000] usbcore: registered new interface driver ums-karma
[   14.750000] usbcore: registered new interface driver ums-sddr09
[   14.760000] usbcore: registered new interface driver ums-sddr55
[   14.770000] usbcore: registered new interface driver ums-usbat
[   14.790000] usbcore: registered new interface driver usbserial
[   14.800000] usbcore: registered new interface driver usbserial_generic
[   14.800000] usbserial: USB Serial support registered for generic
[   14.830000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   14.860000] xt_time: kernel timezone is -0000
[   14.870000] usbcore: registered new interface driver asix
[   14.880000] usbcore: registered new interface driver ax88179_178a
[   14.890000] usbcore: registered new interface driver cdc_ether
[   14.900000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.920000] usbcore: registered new interface driver pl2303
[   14.930000] usbserial: USB Serial support registered for pl2303
[   14.940000] PPP generic driver version 2.4.2
[   14.950000] NET: Registered protocol family 24
[   14.950000] usbcore: registered new interface driver qmi_wwan
[   14.960000] usbcore: registered new interface driver rndis_host
[   14.970000] usbcore: registered new interface driver sierra_net
[   14.990000] usbcore: registered new interface driver option
[   14.990000] usbserial: USB Serial support registered for GSM modem (1-port)
[   15.080000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[   15.310000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
[   15.320000] ath9k_htc 1-1.1:1.0: FW RMW support: On
[   15.320000] ath: EEPROM regdomain: 0x0
[   15.320000] ath: EEPROM indicates default country code should be used
[   15.320000] ath: doing EEPROM country->regdmn map search
[   15.320000] ath: country maps to regdmn code: 0x3a
[   15.320000] ath: Country alpha2 being used: US
[   15.320000] ath: Regpair used: 0x3a
[   15.330000] ieee80211 phy1: Atheros AR9271 Rev:1
[   29.000000] device eth0 entered promiscuous mode
[   31.380000] eth0: link up (100Mbps/Full duplex)
[   31.420000] br-lan: port 1(eth0) entered forwarding state
[   31.420000] br-lan: port 1(eth0) entered forwarding state
[   33.420000] br-lan: port 1(eth0) entered forwarding state
[   34.360000] device wlan0 entered promiscuous mode
[   34.360000] br-lan: port 2(wlan0) entered forwarding state
[   34.370000] br-lan: port 2(wlan0) entered forwarding state
[   34.530000] br-lan: port 2(wlan0) entered disabled state
[   34.850000] br-lan: port 2(wlan0) entered forwarding state
[   34.850000] br-lan: port 2(wlan0) entered forwarding state
[   36.850000] br-lan: port 2(wlan0) entered forwarding state
[   45.300000] random: nonblocking pool is initialized
[   48.430000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   48.440000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   48.440000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[   59.900000] jffs2: notice: (2063) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   61.740000] device wlan0 left promiscuous mode
[   61.740000] br-lan: port 2(wlan0) entered disabled state
[   64.140000] device wlan0 entered promiscuous mode
[   64.150000] br-lan: port 2(wlan0) entered forwarding state
[   64.150000] br-lan: port 2(wlan0) entered forwarding state
[   66.150000] br-lan: port 2(wlan0) entered forwarding state
[  219.680000] br-lan: port 2(wlan0) entered disabled state
[  220.040000] device wlan0 left promiscuous mode
[  220.050000] br-lan: port 2(wlan0) entered disabled state
[  246.610000] device wlan0 entered promiscuous mode
[  246.620000] br-lan: port 2(wlan0) entered forwarding state
[  246.620000] br-lan: port 2(wlan0) entered forwarding state
[  246.720000] device wlan0-1 entered promiscuous mode
[  246.730000] br-lan: port 3(wlan0-1) entered forwarding state
[  246.730000] br-lan: port 3(wlan0-1) entered forwarding state
[  247.200000] br-lan: port 3(wlan0-1) entered disabled state
[  247.430000] br-lan: port 3(wlan0-1) entered forwarding state
[  247.430000] br-lan: port 3(wlan0-1) entered forwarding state
[  248.620000] br-lan: port 2(wlan0) entered forwarding state
[  249.430000] br-lan: port 3(wlan0-1) entered forwarding state
[  395.400000] device wlan0 left promiscuous mode
[  395.410000] br-lan: port 2(wlan0) entered disabled state
[  395.410000] device wlan0-1 left promiscuous mode
[  395.420000] br-lan: port 3(wlan0-1) entered disabled state
[  397.760000] device wlan0 entered promiscuous mode
[  397.760000] br-lan: port 2(wlan0) entered forwarding state
[  397.770000] br-lan: port 2(wlan0) entered forwarding state
[  397.860000] device wlan0-1 entered promiscuous mode
[  397.880000] br-lan: port 3(wlan0-1) entered forwarding state
[  397.880000] br-lan: port 3(wlan0-1) entered forwarding state
[  397.900000] br-lan: port 3(wlan0-1) entered disabled state
[  398.630000] br-lan: port 3(wlan0-1) entered forwarding state
[  398.640000] br-lan: port 3(wlan0-1) entered forwarding state
[  399.770000] br-lan: port 2(wlan0) entered forwarding state
[  400.640000] br-lan: port 3(wlan0-1) entered forwarding state
[  510.570000] device wlan0 left promiscuous mode
[  510.570000] br-lan: port 2(wlan0) entered disabled state
[  511.030000] br-lan: port 3(wlan0-1) entered disabled state
[  511.040000] device wlan0-1 left promiscuous mode
[  511.040000] br-lan: port 3(wlan0-1) entered disabled state
[  512.440000] eth0: link down
[  512.910000] device wlan0 entered promiscuous mode
[  512.910000] br-lan: port 2(wlan0) entered forwarding state
[  512.920000] br-lan: port 2(wlan0) entered forwarding state
[  513.010000] device wlan0-1 entered promiscuous mode
[  513.020000] br-lan: port 3(wlan0-1) entered forwarding state
[  513.020000] br-lan: port 3(wlan0-1) entered forwarding state
[  513.060000] br-lan: port 1(eth0) entered disabled state
[  513.060000] br-lan: port 3(wlan0-1) entered disabled state
[  513.730000] br-lan: port 3(wlan0-1) entered forwarding state
[  513.740000] br-lan: port 3(wlan0-1) entered forwarding state
[  514.440000] eth0: link up (100Mbps/Full duplex)
[  514.440000] br-lan: port 1(eth0) entered forwarding state
[  514.450000] br-lan: port 1(eth0) entered forwarding state
[  514.920000] br-lan: port 2(wlan0) entered forwarding state
[  515.740000] br-lan: port 3(wlan0-1) entered forwarding state
[  516.450000] br-lan: port 1(eth0) entered forwarding state
[  572.970000] device wlan1mon entered promiscuous mode
============LOGREAD========
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: starting ssh (count 2)
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh child pid is 2034
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: starting ssh (count 3)
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh child pid is 2035
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: starting ssh (count 4)
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh child pid is 2036
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: starting ssh (count 5)
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh child pid is 2037
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: starting ssh (count 6)
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh child pid is 2038
Mon Dec 25 22:25:19 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:25:20 2017 kern.notice kernel: [   45.300000] random: nonblocking pool is initialized
Mon Dec 25 22:25:21 2017 user.info autossh[1706]: starting ssh (count 7)
Mon Dec 25 22:25:21 2017 user.info autossh[1706]: ssh child pid is 2039
Mon Dec 25 22:25:21 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:25:23 2017 auth.info sshd[2044]: Server listening on 0.0.0.0 port 22.
Mon Dec 25 22:25:23 2017 daemon.err mount_root: no jffs2 marker found
Mon Dec 25 22:25:23 2017 kern.warn kernel: [   48.430000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Mon Dec 25 22:25:23 2017 kern.warn kernel: [   48.440000] jffs2_build_filesystem(): unlocking the mtd device... done.
Mon Dec 25 22:25:29 2017 user.info autossh[1706]: starting ssh (count 8)
Mon Dec 25 22:25:29 2017 user.info autossh[1706]: ssh child pid is 2066
Mon Dec 25 22:25:29 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:25:35 2017 kern.warn kernel: [   48.440000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
Mon Dec 25 22:25:35 2017 kern.notice kernel: [   59.900000] jffs2: notice: (2063) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Dec 25 22:25:35 2017 daemon.info mount_root: performing overlay whiteout
Mon Dec 25 22:25:35 2017 auth.info sshd[2044]: Received signal 15; terminating.
Mon Dec 25 22:25:36 2017 daemon.err block: /dev/mtdblock3 is already mounted
Mon Dec 25 22:25:37 2017 kern.info kernel: [   61.740000] device wlan0 left promiscuous mode
Mon Dec 25 22:25:37 2017 kern.info kernel: [   61.740000] br-lan: port 2(wlan0) entered disabled state
Mon Dec 25 22:25:37 2017 daemon.notice netifd: Network device 'wlan0' link is down
Mon Dec 25 22:25:37 2017 user.emerg syslog: setting up led WLAN
Mon Dec 25 22:25:38 2017 user.emerg syslog: WiFi Pineapple Controller version 0.1
Mon Dec 25 22:25:38 2017 user.emerg syslog: 
Mon Dec 25 22:25:38 2017 user.emerg syslog: Usage: pineapple [command] [[options]] [[[args]]]
Mon Dec 25 22:25:38 2017 user.emerg syslog: 
Mon Dec 25 22:25:38 2017 user.emerg syslog: A Program to controll your WiFi Pineapple over the commandline.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 
Mon Dec 25 22:25:38 2017 user.emerg syslog: Commands:
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	karma
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  start - Starts Karma
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  stop  - Stops Karma
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  list_ssids - Lists all SSIDs in Karma's black/white list.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  list_macs  - Lists all SSIDs in Karma's black list.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  add_ssid [SSID] - Adds the specified SSID to the black/white list.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  del_ssid [SSID] - Delete the specified SSID from the black/white list.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  add_mac  [MAC]  - Adds the specified MAC to the black list.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  del_mac  [MAC]  - Delete the specified MAC from the black list.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	led 
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  on    - Turn's the blue LED on.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  off   - Turn's the blue LED off.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  reset - Reset's LED behaviour to default
Mon Dec 25 22:25:38 2017 user.emerg syslog: 
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	module
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  list - Lists all available modules with a CLI component.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	  [Module Name] [[args]] - Runs specified module with args if given.
Mon Dec 25 22:25:38 2017 user.emerg syslog: 
Mon Dec 25 22:25:38 2017 user.emerg syslog: 	notify [notification text] - Sends a notification to the webinterface
Mon Dec 25 22:25:38 2017 user.emerg syslog: 
Mon Dec 25 22:25:38 2017 daemon.notice netifd: radio1 (2186): Interface 0 setup failed: BRIDGE_NOT_ALLOWED
Mon Dec 25 22:25:39 2017 user.emerg syslog: Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
Mon Dec 25 22:25:39 2017 user.emerg syslog: Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
Mon Dec 25 22:25:39 2017 user.emerg syslog: uci: Entry not found
Mon Dec 25 22:25:39 2017 user.emerg syslog: sh: 0: unknown operand
Mon Dec 25 22:25:39 2017 daemon.info procd: - init complete -
Mon Dec 25 22:25:39 2017 daemon.notice netifd: radio0 (2221): Configuration file: /var/run/hostapd-phy0.conf
Mon Dec 25 22:25:39 2017 kern.info kernel: [   64.140000] device wlan0 entered promiscuous mode
Mon Dec 25 22:25:39 2017 kern.info kernel: [   64.150000] br-lan: port 2(wlan0) entered forwarding state
Mon Dec 25 22:25:39 2017 kern.info kernel: [   64.150000] br-lan: port 2(wlan0) entered forwarding state
Mon Dec 25 22:25:39 2017 daemon.notice netifd: radio0 (2221): Using interface wlan0 with hwaddr 00:c0:ca:91:7d:5d and ssid "Pineapple_7D5D"
Mon Dec 25 22:25:39 2017 daemon.notice netifd: radio0 (2221): wlan0: interface state UNINITIALIZED->ENABLED
Mon Dec 25 22:25:39 2017 daemon.notice netifd: radio0 (2221): wlan0: AP-ENABLED 
Mon Dec 25 22:25:41 2017 kern.info kernel: [   66.150000] br-lan: port 2(wlan0) entered forwarding state
Mon Dec 25 22:25:41 2017 daemon.notice netifd: radio0 (2221): OK
Mon Dec 25 22:25:41 2017 daemon.notice netifd: radio0 (2221): Unknown command 'karma_ssid_black'
Mon Dec 25 22:25:41 2017 daemon.notice netifd: radio0 (2221): ADDED
Mon Dec 25 22:25:41 2017 daemon.notice netifd: Network device 'wlan0' link is up
Mon Dec 25 22:25:47 2017 user.info autossh[1706]: starting ssh (count 9)
Mon Dec 25 22:25:47 2017 user.info autossh[1706]: ssh child pid is 2448
Mon Dec 25 22:25:47 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:26:19 2017 user.info autossh[1706]: starting ssh (count 10)
Mon Dec 25 22:26:19 2017 user.info autossh[1706]: ssh child pid is 2449
Mon Dec 25 22:26:19 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:27:09 2017 user.info autossh[1706]: starting ssh (count 11)
Mon Dec 25 22:27:09 2017 user.info autossh[1706]: ssh child pid is 2450
Mon Dec 25 22:27:09 2017 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Dec 25 22:28:14 2017 user.notice root: First Setup: Disable WiFi
Mon Dec 25 22:28:15 2017 daemon.notice netifd: Network device 'wlan0' link is down
Mon Dec 25 22:28:15 2017 kern.info kernel: [  219.680000] br-lan: port 2(wlan0) entered disabled state
Mon Dec 25 22:28:15 2017 kern.info kernel: [  220.040000] device wlan0 left promiscuous mode
Mon Dec 25 22:28:15 2017 kern.info kernel: [  220.050000] br-lan: port 2(wlan0) entered disabled state
Sun Jan 28 23:52:00 2018 user.info autossh[1706]: starting ssh (count 12)
Sun Jan 28 23:52:00 2018 user.info autossh[1706]: ssh child pid is 2549
Sun Jan 28 23:52:00 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Sun Jan 28 23:52:18 2018 auth.info sshd[2663]: Server listening on 0.0.0.0 port 22.
Sun Jan 28 23:52:19 2018 daemon.notice netifd: radio1 (2673): Interface 0 setup failed: BRIDGE_NOT_ALLOWED
Sun Jan 28 23:52:20 2018 daemon.notice netifd: radio0 (2672): Configuration file: /var/run/hostapd-phy0.conf
Sun Jan 28 23:52:20 2018 kern.info kernel: [  246.610000] device wlan0 entered promiscuous mode
Sun Jan 28 23:52:20 2018 kern.info kernel: [  246.620000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:52:20 2018 kern.info kernel: [  246.620000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:52:20 2018 daemon.notice netifd: radio0 (2672): Using interface wlan0 with hwaddr 00:c0:ca:91:7d:5d and ssid "Pineapple_7D5D"
Sun Jan 28 23:52:20 2018 kern.info kernel: [  246.720000] device wlan0-1 entered promiscuous mode
Sun Jan 28 23:52:20 2018 kern.info kernel: [  246.730000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:52:20 2018 kern.info kernel: [  246.730000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:52:20 2018 daemon.notice netifd: radio0 (2672): Using interface wlan0-1 with hwaddr 02:c0:ca:91:7d:5d and ssid "Pineapple"
Sun Jan 28 23:52:20 2018 kern.info kernel: [  247.200000] br-lan: port 3(wlan0-1) entered disabled state
Sun Jan 28 23:52:21 2018 kern.info kernel: [  247.430000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:52:21 2018 kern.info kernel: [  247.430000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:52:21 2018 daemon.notice netifd: radio0 (2672): wlan0: interface state UNINITIALIZED->ENABLED
Sun Jan 28 23:52:21 2018 daemon.notice netifd: radio0 (2672): wlan0: AP-ENABLED 
Sun Jan 28 23:52:22 2018 kern.info kernel: [  248.620000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:52:23 2018 kern.info kernel: [  249.430000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:52:23 2018 daemon.notice netifd: radio0 (2672): OK
Sun Jan 28 23:52:23 2018 daemon.notice netifd: radio0 (2672): Unknown command 'karma_ssid_black'
Sun Jan 28 23:52:23 2018 daemon.notice netifd: radio0 (2672): ADDED
Sun Jan 28 23:52:23 2018 daemon.notice netifd: Network device 'wlan0' link is up
Sun Jan 28 23:52:23 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Sun Jan 28 23:53:38 2018 user.info autossh[1706]: starting ssh (count 13)
Sun Jan 28 23:53:38 2018 user.info autossh[1706]: ssh child pid is 3186
Sun Jan 28 23:53:38 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Sun Jan 28 23:54:49 2018 kern.info kernel: [  395.400000] device wlan0 left promiscuous mode
Sun Jan 28 23:54:49 2018 kern.info kernel: [  395.410000] br-lan: port 2(wlan0) entered disabled state
Sun Jan 28 23:54:49 2018 kern.info kernel: [  395.410000] device wlan0-1 left promiscuous mode
Sun Jan 28 23:54:49 2018 kern.info kernel: [  395.420000] br-lan: port 3(wlan0-1) entered disabled state
Sun Jan 28 23:54:51 2018 daemon.notice netifd: radio1 (3367): Interface 0 setup failed: BRIDGE_NOT_ALLOWED
Sun Jan 28 23:54:51 2018 daemon.notice netifd: radio0 (3391): Configuration file: /var/run/hostapd-phy0.conf
Sun Jan 28 23:54:51 2018 kern.info kernel: [  397.760000] device wlan0 entered promiscuous mode
Sun Jan 28 23:54:51 2018 kern.info kernel: [  397.760000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:54:51 2018 kern.info kernel: [  397.770000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:54:51 2018 daemon.notice netifd: radio0 (3391): Using interface wlan0 with hwaddr 00:c0:ca:91:7d:5d and ssid "Free Wifi"
Sun Jan 28 23:54:51 2018 kern.info kernel: [  397.860000] device wlan0-1 entered promiscuous mode
Sun Jan 28 23:54:51 2018 kern.info kernel: [  397.880000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:54:51 2018 kern.info kernel: [  397.880000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:54:51 2018 kern.info kernel: [  397.900000] br-lan: port 3(wlan0-1) entered disabled state
Sun Jan 28 23:54:51 2018 daemon.notice netifd: radio0 (3391): Using interface wlan0-1 with hwaddr 02:c0:ca:91:7d:5d and ssid "Pineapple"
Sun Jan 28 23:54:52 2018 kern.info kernel: [  398.630000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:54:52 2018 kern.info kernel: [  398.640000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:54:52 2018 daemon.notice netifd: radio0 (3391): wlan0: interface state UNINITIALIZED->ENABLED
Sun Jan 28 23:54:52 2018 daemon.notice netifd: radio0 (3391): wlan0: AP-ENABLED 
Sun Jan 28 23:54:53 2018 kern.info kernel: [  399.770000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:54:54 2018 kern.info kernel: [  400.640000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:54:54 2018 daemon.notice netifd: radio0 (3391): OK
Sun Jan 28 23:54:54 2018 daemon.notice netifd: radio0 (3391): Unknown command 'karma_ssid_black'
Sun Jan 28 23:54:54 2018 daemon.notice netifd: radio0 (3391): ADDED
Sun Jan 28 23:54:54 2018 daemon.notice netifd: Network device 'wlan0' link is up
Sun Jan 28 23:54:54 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Sun Jan 28 23:55:46 2018 user.info autossh[1706]: starting ssh (count 14)
Sun Jan 28 23:55:46 2018 user.info autossh[1706]: ssh child pid is 3669
Sun Jan 28 23:55:46 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Sun Jan 28 23:56:44 2018 kern.info kernel: [  510.570000] device wlan0 left promiscuous mode
Sun Jan 28 23:56:44 2018 kern.info kernel: [  510.570000] br-lan: port 2(wlan0) entered disabled state
Sun Jan 28 23:56:44 2018 daemon.notice netifd: Network device 'wlan0-1' link is down
Sun Jan 28 23:56:44 2018 kern.info kernel: [  511.030000] br-lan: port 3(wlan0-1) entered disabled state
Sun Jan 28 23:56:44 2018 kern.info kernel: [  511.040000] device wlan0-1 left promiscuous mode
Sun Jan 28 23:56:44 2018 kern.info kernel: [  511.040000] br-lan: port 3(wlan0-1) entered disabled state
Sun Jan 28 23:56:46 2018 kern.info kernel: [  512.440000] eth0: link down
Sun Jan 28 23:56:46 2018 daemon.notice netifd: radio1 (3770): Interface 0 setup failed: BRIDGE_NOT_ALLOWED
Sun Jan 28 23:56:46 2018 daemon.notice netifd: radio0 (3794): Configuration file: /var/run/hostapd-phy0.conf
Sun Jan 28 23:56:46 2018 kern.info kernel: [  512.910000] device wlan0 entered promiscuous mode
Sun Jan 28 23:56:46 2018 kern.info kernel: [  512.910000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:56:46 2018 kern.info kernel: [  512.920000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:56:46 2018 daemon.notice netifd: radio0 (3794): Using interface wlan0 with hwaddr 00:c0:ca:91:7d:5d and ssid "Free Wifi"
Sun Jan 28 23:56:46 2018 kern.info kernel: [  513.010000] device wlan0-1 entered promiscuous mode
Sun Jan 28 23:56:46 2018 kern.info kernel: [  513.020000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:56:46 2018 kern.info kernel: [  513.020000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:56:46 2018 kern.info kernel: [  513.060000] br-lan: port 1(eth0) entered disabled state
Sun Jan 28 23:56:46 2018 kern.info kernel: [  513.060000] br-lan: port 3(wlan0-1) entered disabled state
Sun Jan 28 23:56:46 2018 daemon.notice netifd: Network device 'eth0' link is down
Sun Jan 28 23:56:46 2018 daemon.notice netifd: radio0 (3794): Using interface wlan0-1 with hwaddr 02:c0:ca:91:7d:5d and ssid "Pineapple"
Sun Jan 28 23:56:47 2018 kern.info kernel: [  513.730000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:56:47 2018 kern.info kernel: [  513.740000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:56:47 2018 daemon.notice netifd: radio0 (3794): wlan0: interface state UNINITIALIZED->ENABLED
Sun Jan 28 23:56:47 2018 daemon.notice netifd: radio0 (3794): wlan0: AP-ENABLED 
Sun Jan 28 23:56:48 2018 kern.info kernel: [  514.440000] eth0: link up (100Mbps/Full duplex)
Sun Jan 28 23:56:48 2018 kern.info kernel: [  514.440000] br-lan: port 1(eth0) entered forwarding state
Sun Jan 28 23:56:48 2018 kern.info kernel: [  514.450000] br-lan: port 1(eth0) entered forwarding state
Sun Jan 28 23:56:48 2018 daemon.notice netifd: Network device 'eth0' link is up
Sun Jan 28 23:56:48 2018 kern.info kernel: [  514.920000] br-lan: port 2(wlan0) entered forwarding state
Sun Jan 28 23:56:49 2018 kern.info kernel: [  515.740000] br-lan: port 3(wlan0-1) entered forwarding state
Sun Jan 28 23:56:49 2018 daemon.notice netifd: radio0 (3794): OK
Sun Jan 28 23:56:49 2018 daemon.notice netifd: radio0 (3794): Unknown command 'karma_ssid_black'
Sun Jan 28 23:56:49 2018 daemon.notice netifd: radio0 (3794): ADDED
Sun Jan 28 23:56:49 2018 daemon.notice netifd: Network device 'wlan0' link is up
Sun Jan 28 23:56:49 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Sun Jan 28 23:56:50 2018 kern.info kernel: [  516.450000] br-lan: port 1(eth0) entered forwarding state
Sun Jan 28 23:57:46 2018 kern.info kernel: [  572.970000] device wlan1mon entered promiscuous mode
Sun Jan 28 23:58:28 2018 user.info autossh[1706]: starting ssh (count 15)
Sun Jan 28 23:58:28 2018 user.info autossh[1706]: ssh child pid is 4404
Sun Jan 28 23:58:28 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Sun Jan 28 23:58:44 2018 user.info autossh[1706]: starting ssh (count 16)
Sun Jan 28 23:58:44 2018 user.info autossh[1706]: ssh child pid is 4419
Sun Jan 28 23:58:44 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Jan 29 00:02:45 2018 user.info autossh[1706]: starting ssh (count 17)
Mon Jan 29 00:02:45 2018 user.info autossh[1706]: ssh child pid is 4605
Mon Jan 29 00:02:45 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Jan 29 00:07:33 2018 user.info autossh[1706]: starting ssh (count 18)
Mon Jan 29 00:07:33 2018 user.info autossh[1706]: ssh child pid is 4955
Mon Jan 29 00:07:33 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh
Mon Jan 29 00:08:44 2018 user.info autossh[1706]: starting ssh (count 19)
Mon Jan 29 00:08:44 2018 user.info autossh[1706]: ssh child pid is 4995
Mon Jan 29 00:08:44 2018 user.info autossh[1706]: ssh exited with error status 255; restarting ssh

 

Link to comment
Share on other sites

9 hours ago, mimo said:

Do you have an advice for me how to fix this problem?

 
Its not a bug, in latest Firmware release the default setting of the Client filter is set to "Allow mode" so requires MAC addresses of devices you want to allow access.

This is a wise move from the manufacturer as this actually puts responsibility back to the user to use the device legally out of the box. And some new users may not have even known what they were doing.

It can be changed and you can still allow any device to connect... but thats on you, not Hak5.

Link to comment
Share on other sites

I thought using a password is the only way for an authentication, but a MAC filter is also one... Does the AP returns the reason for the authentication error (wrong password or wrong mac address) or no detailed information?

After changing it it worked again. I will read the changes more carefully in the future.

 

Thank you Just_a_User :)

Link to comment
Share on other sites

  • 1 month later...

Hi,

For me its not working at all, both open AP and management AP.

Tried everything, reflash firmware (2.0.2), factory reset, changing Client to Deny Mode, adding MAC in allow mode,...

Always get a "Authentication Error" when connecting via WIFI. Tried with Android, Windows, Linux, IOS,....

Frustrating,...

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...