Jehu4u Posted August 9, 2018 Posted August 9, 2018 1 minute ago, Zylla said: The MAC filters, and other "crucial settings" are specified within /etc/mana-toolkit/hostapd-mana.conf Which you can edit within the module. It's not connected in any way with Recon or Pineap,as of yet. The default config will attack anything and anyone in range. BUT It's running in "blacklist" mode, so you can add MAC's you want to avoid to /etc/mana-toolkit/hostapd.deny awesome thanks
Zylla Posted August 9, 2018 Author Posted August 9, 2018 If it cannot find wlan1, then it means wlan1 is not there. Are you perhaps running PineAP/Recon at the same time? Because that would set wlan1 -> wlan1mon. wlan1 needs to be free, and not in use for Mana to launch properly. I suggest you check your wireless interfaces before trying to launch it. iwconfig is a good place to start. :)
Zylla Posted August 9, 2018 Author Posted August 9, 2018 4 minutes ago, Jehu4u said: Just did a factory reset, terminal install of wget -qO- https://raw.githubusercontent.com/adde88/hostapd-mana/master/INSTALL.sh | bash -s -- -v -v not working today? no response install-mana-depends No response? What happens when you launch the first command? Does it execute the script? Any error messages? It's working perfectly for me. Both Tetra and Nano. Can you confirm that your Pineapple has an internet connection, so it manages to download the stuff? Try pinging google.com or somthing.
Jehu4u Posted August 9, 2018 Posted August 9, 2018 derrrr. i had to redo internet connection sharing after the restore. thought i deleted that post in time, sry. about to install depends, then will test. ill install the GUI module after the depends and reboot. should i be able to start mana from GUI? never worked before but would see it "started in gui" of launced from terminal
Zylla Posted August 9, 2018 Author Posted August 9, 2018 1 minute ago, Jehu4u said: derrrr. i had to redo internet connection sharing after the restore. thought i deleted that post in time, sry. about to install depends, then will test. ill install the GUI module after the depends and reboot. should i be able to start mana from GUI? never worked before but would see it "started in gui" of launced from terminal The Module is working yes, but not as complete as i want it to be. It works, launches mana, or if you have already launched in the terminal it will display the output in the GUI, either way.
Jehu4u Posted August 9, 2018 Posted August 9, 2018 19 minutes ago, Zylla said: The Module is working yes, but not as complete as i want it to be. It works, launches mana, or if you have already launched in the terminal it will display the output in the GUI, either way. yeah, wont start with GUI "starting" then back to start. launched in terminal ok. going to let it run and see.! can i PM you for questions or screenshotss or is thread better?
Jehu4u Posted August 9, 2018 Posted August 9, 2018 HSTS sites dont work i guess? default settings, apps and websites will simple not work for clients. cert warnings on others (ios) my understanding is that SSLstrip, some DNS trickery and a rouge AP is the way to get it to work. Running Mana without any config changes will spoof SSID's and get clients to connect, that works. Anything else to get the HSTS bypass working?
Marcobis Posted August 11, 2018 Posted August 11, 2018 I got the module installed but, on the moment that i hit start it won't start. After i hit start a log comes up with this. Does someone have a idea how to fix this? Configuration file: /sd/etc/mana-toolkit/hostapd-mana.conf MANA: Observed activity will be written to. File /tmp/hostapd-mana.out set. MANA: Line 76: Failed to open credential out file '/var/lib/mana-toolkit/hostapd.credout' 1 errors found in configuration file '/sd/etc/mana-toolkit/hostapd-mana.conf' Failed to set up interface with /sd/etc/mana-toolkit/hostapd-mana.conf Failed to initialize interface
Zylla Posted August 13, 2018 Author Posted August 13, 2018 On 8/9/2018 at 10:17 PM, Jehu4u said: Strange too how if it crashes ill then get (after rebooting tetra) cannot start Mana via GUI wlan1 or wlan0, & terminal will say wlan1 not found, or device is offline Could you provide a more detailed log or screenshot of the event? If it says wlan1 not found, then wlan1 is not up. What wlan1 is doing i don't know. It could be in monitor mode, for some reason (Running Recon/PineAP). But if you show me the output of iwconfig i can probably give an answer to what's going on.
Zylla Posted August 13, 2018 Author Posted August 13, 2018 On 8/11/2018 at 8:19 PM, Marcobis said: I got the module installed but, on the moment that i hit start it won't start. After i hit start a log comes up with this. Does someone have a idea how to fix this? Configuration file: /sd/etc/mana-toolkit/hostapd-mana.conf MANA: Observed activity will be written to. File /tmp/hostapd-mana.out set. MANA: Line 76: Failed to open credential out file '/var/lib/mana-toolkit/hostapd.credout' 1 errors found in configuration file '/sd/etc/mana-toolkit/hostapd-mana.conf' Failed to set up interface with /sd/etc/mana-toolkit/hostapd-mana.conf Failed to initialize interface I'll check if there's anything wrong with the provded hostapd.conf Meanwhile, try opening /sd/etc/mana-toolkit/hostapd-mana.conf in a text editor, like nano. Then go to line 76 and check what's wrong. It looks to be near the end of the file, for example a blank space can give that error. But as said, i'll look into it, just a tip to fix it meanwhile. EDIT: Try re-installing hostapd-mana. I think there was an error with a config file i provided in a installation once, which i fixed shortly afterwards. As the config file within the IPK seems fine now.
ramirovargas007 Posted August 13, 2018 Posted August 13, 2018 how do I install the module manually, where I have to create the folder
Zylla Posted August 13, 2018 Author Posted August 13, 2018 4 hours ago, ramirovargas007 said: how do I install the module manually, where I have to create the folder Modules are "installed" into /pineapple/modules/ So the exact module folder would be: /pineapple/modules/ManaToolkit But, if you're on a Nano you should place it on the SD-card. Changing the path to this: /sd/modules/ManaToolkit Afterwards, make a symlink, like this: ln -s /sd/modules/ManaToolkit /pineapple/modules/ManaToolkit
ramirovargas007 Posted August 16, 2018 Posted August 16, 2018 ---------------Spanish – detectedAfrikaansAlbanianAmharicArabicArmenianAzerbaijaniBanglaBasqueBelarusianBosnianBulgarianBurmeseCatalanCebuanoChinese (Simplified)Chinese (Traditional)CorsicanCroatianCzechDanishDutchEnglishEsperantoEstonianFilipinoFinnishFrenchGalicianGeorgianGermanGreekGujaratiHaitian CreoleHausaHawaiianHebrewHindiHmongHungarianIcelandicIgboIndonesianIrishItalianJapaneseJavaneseKannadaKazakhKhmerKoreanKurdishKyrgyzLaoLatinLatvianLithuanianLuxembourgishMacedonianMalagasyMalayMalayalamMalteseMaoriMarathiMongolianNepaliNorwegianNyanjaPashtoPersianPolishPortuguesePunjabiRomanianRussianSamoanScottish GaelicSerbianShonaSindhiSinhalaSlovakSlovenianSomaliSouthern SothoSpanishSundaneseSwahiliSwedishTajikTamilTeluguThaiTurkishUkrainianUrduUzbekVietnameseWelshWestern FrisianXhosaYiddishYorubaZuluSpanish – detected greetings how to install the dependencies, I have done it in many ways and I have not achieved someone tells me how to install them perfectly.
ramirovargas007 Posted August 16, 2018 Posted August 16, 2018 On 9/16/2016 at 12:50 PM, Zylla said: MANA-Toolkit! Pineapple NANO + TETRA.(IPK installation-files, and source-files ready to compile with OpenWRT-SDK)MANA Toolkit includes a working version of SSLstrip2+dns2proxy for the Pineapples.Last update: 22.07.2018Changelog: Taxonomy part of hostapd is activated. Updated to follow upstream, same updated source-code as Sensepost is using. Changes have been done to installation part! Remember to read the output! Will no longer use a copy of my python-library. But download the needed python packages fro SSLstrip2, SSLsplit, dns2proxy, crackapd, net-creds, firelamb and every part of the MANA-Toolkit comes with the package. (Even aslEAP) EAP penetration testing is now very feasible. Install procedure: root@Pineapple:~# wget -qO- https://raw.githubusercontent.com/adde88/hostapd-mana/master/INSTALL.sh | bash -s -- -v -v After a little while you should get a message saying installation was successful. But we're not quite done. You need to install the python-dependencies with this command: root@Pineapple:~# install-mana-depends How do i start MANA? Make sure you are not using wlan1 for anything. (For example having it in monitor mode) If you are, hostapd-mana will not be able to set the interface to 'master' mode Type 'launch-mana' in the terminal to launch the attack. The attack should go silently into the background while at the same time giving output to the screen and to the log-files. root@Pineapple:~# launch-mana Type 'kill-mana' in the terminal to stop the attack. root@Pineapple:~# kill-mana Module:https://github.com/adde88/ManaToolkit I have released a "pre-release" version of the Mana Toolkit "Module" for the Pineapples. This lets you launch the attack from the Pineapples web-interface. General feedback or tips for improving the module are greatly appreciated! Github repo. + source-codes:https://github.com/adde88/hostapd-mana-openwrthttps://github.com/adde88/hostapd-manahttps://github.com/adde88/ManaToolkit (NEW BLEEDING-EDGE / DEV. BRANCH IS UP) The first repo. contains the IPK files you need to install everything, but it also contains the files you need to build it yourself with a proper SDK. The second repo. is used by the SDK. The SDK Makefile will download everything it needs from this repo. to build the MANA-Toolkit package. You don’t need to touch the second repo. to get anything up and running. (OpenWRT-SDK shouold handle this automatically.) The third repo. is the MANA Toolkit "Module", that needs testing and feedback from you guys. It also has a new dev-branch that contains my latest fresh changes, but it's not as stable as the master branch.Important directories:Config files: /etc/mana-toolkit/Log files: /pineapple/modules/ManaToolkit/log (This is the log-directory, even if you don't have the Module installed) You will find the usual MANA Tools at: /usr/share/mana-toolkit/ OPKG Installation Files: (For those who want to install it manually):https://github.com/adde88/hostapd-mana-openwrt/raw/master/bin/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipkhttps://github.com/adde88/hostapd-mana-openwrt/raw/master/bin/ar71xx/packages/base/hostapd-mana_2.6-9_ar71xx.ipk ---------------Spanish – detectedAfrikaansAlbanianAmharicArabicArmenianAzerbaijaniBanglaBasqueBelarusianBosnianBulgarianBurmeseCatalanCebuanoChinese (Simplified)Chinese (Traditional)CorsicanCroatianCzechDanishDutchEnglishEsperantoEstonianFilipinoFinnishFrenchGalicianGeorgianGermanGreekGujaratiHaitian CreoleHausaHawaiianHebrewHindiHmongHungarianIcelandicIgboIndonesianIrishItalianJapaneseJavaneseKannadaKazakhKhmerKoreanKurdishKyrgyzLaoLatinLatvianLithuanianLuxembourgishMacedonianMalagasyMalayMalayalamMalteseMaoriMarathiMongolianNepaliNorwegianNyanjaPashtoPersianPolishPortuguesePunjabiRomanianRussianSamoanScottish GaelicSerbianShonaSindhiSinhalaSlovakSlovenianSomaliSouthern SothoSpanishSundaneseSwahiliSwedishTajikTamilTeluguThaiTurkishUkrainianUrduUzbekVietnameseWelshWestern FrisianXhosaYiddishYorubaZuluSpanish – detected how to install the dependencies correctly if in the WiFi url pineapple does not download it,
ramirovargas007 Posted August 17, 2018 Posted August 17, 2018 On 8/13/2018 at 12:26 PM, Zylla said: Modules are "installed" into /pineapple/modules/ So the exact module folder would be: /pineapple/modules/ManaToolkit But, if you're on a Nano you should place it on the SD-card. Changing the path to this: /sd/modules/ManaToolkit Afterwards, make a symlink, like this: ln -s /sd/modules/ManaToolkit /pineapple/modules/ManaToolkit hey hey how do I install the dependencies on the pineapple page
ramirovargas007 Posted August 17, 2018 Posted August 17, 2018 On 8/9/2018 at 2:18 PM, Jehu4u said: awesome thanks hey hey how do I install the dependencies mana on the pineapple page
Zylla Posted August 18, 2018 Author Posted August 18, 2018 18 hours ago, ramirovargas007 said: hey hey how do I install the dependencies mana on the pineapple page If you're referring to the ManaToolkit "module" you simply click "Install Dependencies". Just remember to NOT install them to internal storage on the Nano. If you're having problems with it, please check that you are having the fresh and latest version of the module. The module have been receiving some updates lately to keep up with other updates i make to the main-parts of the Toolkit. So if you're having an older version of the module, you will have problems getting dependencies installed. I'll look into a way of notifying the user if the module has been updated, or something else that makes this easier to deal with. EDIT: I've now updated the module again. It should now always download the latest version of the IPKs. So i don't have to manually edit them again to add the latest version number. I'll also look into adding a way to notify the user of updates when they are using the module.
ramirovargas007 Posted August 18, 2018 Posted August 18, 2018 4 hours ago, Zylla said: Si se refiere al "módulo" ManaToolkit, simplemente haga clic en "Instalar dependencias". Solo recuerde NO instalarlos en el almacenamiento interno en el Nano. Si tiene problemas con él, verifique que tenga la versión más reciente y nueva del módulo. El módulo ha estado recibiendo algunas actualizaciones últimamente para mantenerse al día con otras actualizaciones que realizo en las partes principales del Toolkit. Por lo tanto, si tiene una versión anterior del módulo, tendrá problemas para instalar dependencias. Buscaré una forma de notificar al usuario si el módulo se ha actualizado, o alguna otra cosa que lo haga más fácil de tratar. EDITAR: He actualizado el módulo nuevamente. Ahora debería descargar siempre la última versión de los IPK. Así que no tengo que editarlos manualmente de nuevo para agregar el último número de versión. También buscaré agregar una forma de notificar al usuario las actualizaciones cuando están usando el módulo. I have a tetra, I put the pineapple / modules / Mana-toolkit folder, then I went to the pineapple page to download the dependencies, but it stays there and nothing is updated.
Zylla Posted August 18, 2018 Author Posted August 18, 2018 1 minute ago, ramirovargas007 said: I have a tetra, I put the pineapple / modules / Mana-toolkit folder, then I went to the pineapple page to download the dependencies, but it stays there and nothing is updated. Can you tell me detailed exactly how you installed/transferred the module to the Tetra?
ramirovargas007 Posted August 18, 2018 Posted August 18, 2018 send the official page to download the updated module
ramirovargas007 Posted August 18, 2018 Posted August 18, 2018 2 minutes ago, Zylla said: ¿Me puede decir exactamente cómo instaló / transfirió el módulo al Tetra? I got it thanks the filezilla program
Zylla Posted August 18, 2018 Author Posted August 18, 2018 Just now, ramirovargas007 said: send the official page to download the updated module The module can be found here: https://github.com/adde88/ManaToolkit But if you download it as a ZIP file, it probably won't work. As ZIP doesn't store the information about files being marked as executable or not.
Zylla Posted August 18, 2018 Author Posted August 18, 2018 ssh root@172.16.42.1 (or whatever IP your Tetra has) opkg update opkg install git git-http cd /pineapple/modules/ git clone git@github.com:adde88/ManaToolkit Fast and easy way.
ramirovargas007 Posted August 18, 2018 Posted August 18, 2018 1 minute ago, Zylla said: Manera rápida y fácil. as it should be done step by step by ssh
Zylla Posted August 18, 2018 Author Posted August 18, 2018 I just explained it step by step over SSH above. 2 minutes ago, Zylla said: ssh root@172.16.42.1 (or whatever IP your Tetra has) opkg update opkg install git git-http cd /pineapple/modules/ git clone git@github.com:adde88/ManaToolkit Fast and easy way.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.