Jump to content

NANO not working


AlexWhitehouse_
 Share

Recommended Posts

At the moment I can use my internet fine via ethernet cable or over wifi. However when I connect the NANO I cannot connect to the internet, cannot use the wp6.sh script and cannot access the NANO over 172.16.42.1:1471..

netstat -nr pre NANO plugin:

Internet:

Destination Gateway Flags Refs Use Netif Expire

default 192.168.1.1 UGSc 34 0 en1

127 127.0.0.1 UCS 0 0 lo0

127.0.0.1 127.0.0.1 UH 1 3425 lo0

169.254 link#5 UCS 0 0 en1

192.168.1 link#5 UCS 1 0 en1

192.168.1.1/32 link#5 UCS 1 0 en1

192.168.1.1 6c:b0:ce:20:a8:53 UHLWIir 37 159 en1 918

192.168.1.11/32 link#5 UCS 1 0 en1

192.168.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1

Internet6:

Destination Gateway Flags Netif Expire

::1 ::1 UHL lo0

fdfc:7126:3072:2666::/64 fe80::3998:7faa:2a09:9fdf%utun0 Uc utun0

fdfc:7126:3072:2666:3998:7faa:2a09:9fdf link#10 UHL lo0

fe80::%lo0/64 fe80::1%lo0 UcI lo0

fe80::1%lo0 link#1 UHLI lo0

fe80::%en1/64 link#5 UCI en1

fe80::e6ce:8fff:fe0b:1d80%en1 e4:ce:8f:b:1d:80 UHLI lo0

fe80::%utun0/64 fe80::3998:7faa:2a09:9fdf%utun0 UcI utun0

fe80::3998:7faa:2a09:9fdf%utun0 link#10 UHLI lo0

ff01::%lo0/32 ::1 UmCI lo0

ff01::%en0/32 link#4 UmCI en0

ff01::%en1/32 link#5 UmCI en1

ff01::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0

ff02::%lo0/32 ::1 UmCI lo0

ff02::%en0/32 link#4 UmCI en0

ff02::%en1/32 link#5 UmCI en1

ff02::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0

netstat -nr after NANO plugin:

Internet:

Destination Gateway Flags Refs Use Netif Expire

default 172.16.42.1 UGSc 6 0 en4

default 192.168.1.1 UGScI 10 0 en1

127 127.0.0.1 UCS 0 0 lo0

127.0.0.1 127.0.0.1 UH 1 3425 lo0

169.254 link#11 UCS 0 0 en4

169.254 link#5 UCSI 0 0 en1

172.16.42/24 link#11 UCS 1 0 en4

172.16.42.1/32 link#11 UCS 1 0 en4

172.16.42.1 0:c0:ca:80:7c:2d UHLWIir 7 78 en4 1200

172.16.42.133/32 link#11 UCS 1 0 en4

172.16.42.255 ff:ff:ff:ff:ff:ff UHLWbI 0 6 en4

192.168.1 link#5 UCS 1 0 en1

192.168.1.1/32 link#5 UCS 1 0 en1

192.168.1.1 6c:b0:ce:20:a8:53 UHLWIir 12 13 en1 1195

192.168.1.11/32 link#5 UCS 1 0 en1

192.168.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 10 en1

Internet6:

Destination Gateway Flags Netif Expire

::1 ::1 UHL lo0

fdfc:7126:3072:2666::/64 fe80::3998:7faa:2a09:9fdf%utun0 Uc utun0

fdfc:7126:3072:2666:3998:7faa:2a09:9fdf link#10 UHL lo0

fe80::%lo0/64 fe80::1%lo0 UcI lo0

fe80::1%lo0 link#1 UHLI lo0

fe80::%en1/64 link#5 UCI en1

fe80::e6ce:8fff:fe0b:1d80%en1 e4:ce:8f:b:1d:80 UHLI lo0

fe80::%utun0/64 fe80::3998:7faa:2a09:9fdf%utun0 UcI utun0

fe80::3998:7faa:2a09:9fdf%utun0 link#10 UHLI lo0

fe80::%en4/64 link#11 UCI en4

fe80::2c0:caff:fe8d:7d15%en4 0:c0:ca:8d:7d:15 UHLI lo0

ff01::%lo0/32 ::1 UmCI lo0

ff01::%en0/32 link#4 UmCI en0

ff01::%en1/32 link#5 UmCI en1

ff01::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0

ff01::%en4/32 link#11 UmCI en4

ff02::%lo0/32 ::1 UmCI lo0

ff02::%en0/32 link#4 UmCI en0

ff02::%en1/32 link#5 UmCI en1

ff02::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0

ff02::%en4/32 link#11 UmCI en4

Any help would be much appreciated

Link to comment
Share on other sites

Can you provide a bit more info? Which adapter are you using for internet connection? Can you provide an ifconfig output before and after you plug in the NANO and let it boot? Also, what do you mean by "cannot use the wp6.sh script"? I suspect the latter answer will be most valuable...

telot

Edited by telot
Link to comment
Share on other sites

Currently i'm using the built in Wifi in my laptop connected to my router. The wp6.sh script crashes when I try enter the Wlan config.. I press enter and it just goes completely unresponsive and tries to use 100% CPU power and about 2.35GB of RAM even when the terminal is closed.. End up having to force quit the process running twice before it finally stops.

Ifconfig before NANO:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384

options=3<RXCSUM,TXCSUM>

inet6 ::1 prefixlen 128

inet 127.0.0.1 netmask 0xff000000

inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1

nd6 options=1<PERFORMNUD>

gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

stf0: flags=0<> mtu 1280

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>

ether c8:2a:14:17:3a:7d

nd6 options=1<PERFORMNUD>

media: autoselect (none)

status: inactive

en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

ether e4:ce:8f:0b:1d:80

inet6 fe80::e6ce:8fff:fe0b:1d80%en1 prefixlen 64 scopeid 0x5

inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255

nd6 options=1<PERFORMNUD>

media: autoselect

status: active

en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500

options=60<TSO4,TSO6>

ether d2:00:1c:bb:da:40

media: autoselect <full-duplex>

status: inactive

fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078

lladdr 70:cd:60:ff:fe:cb:bd:a4

nd6 options=1<PERFORMNUD>

media: autoselect <full-duplex>

status: inactive

p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304

ether 06:ce:8f:0b:1d:80

media: autoselect

status: inactive

bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

options=63<RXCSUM,TXCSUM,TSO4,TSO6>

ether ca:2a:14:71:de:00

Configuration:

id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0

maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200

root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0

ipfilter disabled flags 0x2

member: en2 flags=3<LEARNING,DISCOVER>

ifmaxaddr 0 port 6 priority 0 path cost 0

nd6 options=1<PERFORMNUD>

media: <unknown type>

status: inactive

utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380

inet6 fe80::3998:7faa:2a09:9fdf%utun0 prefixlen 64 scopeid 0xa

inet6 fdfc:7126:3072:2666:3998:7faa:2a09:9fdf prefixlen 64

nd6 options=1<PERFORMNUD>

Ifconfig after NANO:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384

options=3<RXCSUM,TXCSUM>

inet6 ::1 prefixlen 128

inet 127.0.0.1 netmask 0xff000000

inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1

nd6 options=1<PERFORMNUD>

gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

stf0: flags=0<> mtu 1280

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>

ether c8:2a:14:17:3a:7d

nd6 options=1<PERFORMNUD>

media: autoselect (none)

status: inactive

en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

ether e4:ce:8f:0b:1d:80

inet6 fe80::e6ce:8fff:fe0b:1d80%en1 prefixlen 64 scopeid 0x5

inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255

nd6 options=1<PERFORMNUD>

media: autoselect

status: active

en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500

options=60<TSO4,TSO6>

ether d2:00:1c:bb:da:40

media: autoselect <full-duplex>

status: inactive

fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078

lladdr 70:cd:60:ff:fe:cb:bd:a4

nd6 options=1<PERFORMNUD>

media: autoselect <full-duplex>

status: inactive

p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304

ether 06:ce:8f:0b:1d:80

media: autoselect

status: inactive

bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

options=63<RXCSUM,TXCSUM,TSO4,TSO6>

ether ca:2a:14:71:de:00

Configuration:

id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0

maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200

root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0

ipfilter disabled flags 0x2

member: en2 flags=3<LEARNING,DISCOVER>

ifmaxaddr 0 port 6 priority 0 path cost 0

nd6 options=1<PERFORMNUD>

media: <unknown type>

status: inactive

utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380

inet6 fe80::3998:7faa:2a09:9fdf%utun0 prefixlen 64 scopeid 0xa

inet6 fdfc:7126:3072:2666:3998:7faa:2a09:9fdf prefixlen 64

nd6 options=1<PERFORMNUD>

en4: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

options=4<VLAN_MTU>

ether 00:c0:ca:8d:7d:15

inet6 fe80::2c0:caff:fe8d:7d15%en4 prefixlen 64 scopeid 0xb

inet 172.16.42.133 netmask 0xffffff00 broadcast 172.16.42.255

nd6 options=1<PERFORMNUD>

media: autoselect (100baseTX <full-duplex,flow-control>)

status: active

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...